| Size | 208 Liter |
|---|
MANNOL Hydro HV 68 Zinc Free 2213
$111.00
Code : MN2213
Specifications : SAE MS 1004 / ISO Viscosity Grade 46 / DIN 51524-2 (HM) / DIN 51524-3 (HVLP) / ISO 11158 (HM, HV, HVLP)
Recommendation / OEM Approval : ASTM USA D6158 / ANSI AGMA 9005-E02-RO / AIST 126 / AIST 127 / JCMAS P041 HK Hydraulic specification / GERMAN STEEL INDUSTRY SEB 181222 / BOSCH REXROTH RE 90220 / EATON M-2950-S / EATON I-286-S3 / GM LS2 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / SPERRY VICKERS M-2950-S / SPERRY VICKERS I-286-S3
Product Details
All-season mineral hydraulic oils created on the basis of highly-purified basic oils with a high viscosity index and a zinc-free (low-ash) additive package for the most full compliance with specific operating requirements of modern high-load and heat-stressed precision hydraulic systems, including the ones equipped with servo mechanisms and servo valves used in industrial and mobile equipment for which the manufacturer recommends using “zinc-free” hydraulic oils. They were developed taking into account the requirements for industrial hydraulic systems, mobile and stationary equipment operating in the conditions of high and extra-high loads, pressures, operating temperatures and/or velocities and especially in the conditions of strongly varying temperatures and in when there is a strong possibility or water contamination.
Zinc-free hydraulic oils have the same properties as ordinary ones, but at the same time they have a greater expected life and completely eliminate the formation of clots and “loose deposits” that obstruct filters and disrupt servo motor elements in the conditions of a humid environment and high temperatures. These “loose deposits” are formed through an interaction of zinc-containing additives and water.
Product properties:
– They contain zinc-free antiwear, anti-oxidising, anticorrosion and antifoam additives and a viscosity modifier;
– They are highly resistant to oxidation and have the highest hydrolytic stability;
– They have an optimal viscosity in a wide range of operating temperatures in which they ensure the operability of the hydraulic equipment with a maximum productivity during a long period;
– They have good antiwear properties that minimise wear of the parts related to hydraulic pumps, hydraulic directional valves and hydrocylinders, servo motors thus ensuring their long service life and reducing the costs for spare parts;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of the hydraulic system parts thus also protecting precision pairs against wear, extending the equipment life and increasing its efficiency;
– The highest thermo-oxidative and thermal stability, resistance to mechanical and chemical impact reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to excellent anticorrosion properties, they protect surfaces of all used metals and alloys against a corrosive impact of acids, oxidation products and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing temperature, good fluidity at low temperatures;
– The resistance to foam formation and aeration enhance efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
– It has an extended service life (the service interval is more than 5,000 hours of running time).
It is recommended to be used as a power fluid for industrial precision hydraulic systems:
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.) operating at strongly varying temperatures and with the risk of water contamination;
– Stationary equipment – CNC machines and any hydraulic control and water regulation systems with servo motors when there is a risk of water contamination;
– The following types: HITACHI, DENISON, EATON VICKERS, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 3 (HVLP) or ISO 11158 (HV) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2201
Specifications : SAE MS 1004 / ISO Viscosity Grade 32 / DIN 51524-2 (HM) / DIN 51524-3 (HVLP) / ISO 11158 (HM, HV, HVLP) / ASTM USA D6158 / ANSI AGMA 9005-E02-RO / AIST 126 / AIST 127
Recommendation / OEM Approval : JCMAS P041 HK Hydraulic specification / GERMAN STEEL INDUSTRY SEB 181222 / BOSCH REXROTH RE 90220 / EATON M-2950-S / EATON I-286-S3 / GM LS2 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / SPERRY VICKERS M-2950-S / SPERRY VICKERS I-286-S3
Product Details
All-season mineral paraffin hydraulic oils with a high-viscosity index created for the hydraulic equipment of a mobile or stationary equipment operating at high and extra-high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of extra-high loads, pressures, temperatures and/or velocities and especially in the conditions of strongly varying temperatures.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoam additives and a viscosity modifier.
– It has an optimal viscosity in a wide range of operating temperatures in which it ensures the operability of the hydraulic equipment with a maximum productivity during a long period;
– It has excellent antiwear properties that minimise the wear of the parts related to hydraulic pumps, hydraulic directional valves and hydrocylinders thus ensuring their long service life and reducing the costs for spare parts;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of hydraulic system parts thus also protecting precision pairs from wear, extending the equipment life and increasing its efficiency;
– The highest thermo-oxidative and thermal stability, resistance to mechanical and chemical impact, including oxidation, reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to excellent anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids, oxidation products and water thus significantly reducing the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing point, good fluidity at low temperatures and a long service life;
– The resistance to foam formation and aeration enhance efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.) operating in strongly varying temperatures;
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, etc.) operating both outdoors and indoors;
– Hydraulic controls and water regulation;
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are gearboxes, gear couplings, pneumatic devices;
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 3 (HVLP) or ISO 11158 (HV) are required to be eimplemented.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2102
Specifications : ISO Viscosity Grade 46 / DIN 51524-2 (HLP) / ISO 11158 (HM)
Recommendation / OEM Approval : AFNOR FRANCE NF E 48-603 / CONESTOGA ISO 20763 / EATON I-286-S / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / PARKER DENISON Filterability TP 02100 / SPERRY VICKERS I-286-S / US STEEL 126 / US STEEL 127
Product Details
All-season mineral hydraulic oil created for hydraulic devices of stationary and mobile equipment operating in standard and high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of high loads, pressures, temperatures and/or velocities.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoaming additives.
– It has good antiwear properties that minimise the wear of the parts related to hydraulic pumps thus ensuring their long service life;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of hydraulic system parts thus also protecting precision pairs from wear and extend the equipment life;
– A high thermo-oxidative and thermal stability reduce the formation of all types of deposits and corrosive substances that increase the reliability of subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to good anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing temperature and a long service life;
– The resistance to foam formation enhances the efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, etc.);
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.);
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 2 (HLP) or ISO 11158 (HM) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2202
Specifications : SAE MS 1004 / ISO Viscosity Grade 46 / DIN 51524-2 (HM) / DIN 51524-3 (HVLP) / ISO 11158 (HM, HV, HVLP)
Recommendation / OEM Approval : ASTM USA D6158 / ANSI AGMA / 9005-E02-RO / AIST 126 / AIST 127 / JCMAS P041 HK Hydraulic specification / GERMAN STEEL INDUSTRY SEB 181222 / BOSCH REXROTH RE 90220 / EATON M-2950-S / EATON I-286-S3 / GM LS2 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / SPERRY VICKERS M-2950-S / SPERRY VICKERS I-286-S3
Product Details
All-season mineral paraffin hydraulic oils with a high-viscosity index created for the hydraulic equipment of a mobile or stationary equipment operating at high and extra-high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of extra-high loads, pressures, temperatures and/or velocities and especially in the conditions of strongly varying temperatures.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoam additives and a viscosity modifier.
– It has an optimal viscosity in a wide range of operating temperatures in which it ensures the operability of the hydraulic equipment with a maximum productivity during a long period;
– It has excellent antiwear properties that minimise the wear of the parts related to hydraulic pumps, hydraulic directional valves and hydrocylinders thus ensuring their long service life and reducing the costs for spare parts;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of hydraulic system parts thus also protecting precision pairs from wear, extending the equipment life and increasing its efficiency;
– The highest thermo-oxidative and thermal stability, resistance to mechanical and chemical impact, including oxidation, reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to excellent anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids, oxidation products and water thus significantly reducing the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing point, good fluidity at low temperatures and a long service life;
– The resistance to foam formation and aeration enhance efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.) operating in strongly varying temperatures;
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, etc.) operating both outdoors and indoors;
– Hydraulic controls and water regulation;
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are gearboxes, gear couplings, pneumatic devices;
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 3 (HVLP) or ISO 11158 (HV) are required to be implemented.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2208
Specifications : SAE MS 1004 / ISO Viscosity Grade 32 / DIN 51524-2 (HM) / DIN 51524-3 (HVLP) / ISO 11158 (HM, HV, HVLP)
Recommendation / OEM Approval : ASTM USA D6158 / ANSI AGMA 9005-E02-RO / AIST 126 / AIST 127 / JCMAS P041 HK Hydraulic specification / GERMAN STEEL INDUSTRY SEB 181222 / BOSCH REXROTH RE 90220 / EATON M-2950-S / EATON I-286-S3 / GM LS2 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / SPERRY VICKERS M-2950-S / SPERRY VICKERS I-286-S3
Product Details
All-season mineral hydraulic oils created on the basis of highly-purified basic oils with a high viscosity index and a zinc-free (low-ash) additive package for the most full compliance with specific operating requirements of modern high-load and heat-stressed precision hydraulic systems, including the ones equipped with servo mechanisms and servo valves used in industrial and mobile equipment for which the manufacturer recommends using “zinc-free” hydraulic oils. They were developed taking into account the requirements for industrial hydraulic systems, mobile and stationary equipment operating in the conditions of high and extra-high loads, pressures, operating temperatures and/or velocities and especially in the conditions of strongly varying temperatures and in when there is a strong possibility or water contamination.
Zinc-free hydraulic oils have the same properties as ordinary ones, but at the same time they have a greater expected life and completely eliminate the formation of clots and “loose deposits” that obstruct filters and disrupt servo motor elements in the conditions of a humid environment and high temperatures. These “loose deposits” are formed through an interaction of zinc-containing additives and water.
Product properties:
– They contain zinc-free antiwear, anti-oxidising, anticorrosion and antifoam additives and a viscosity modifier;
– They are highly resistant to oxidation and have the highest hydrolytic stability;
– They have an optimal viscosity in a wide range of operating temperatures in which they ensure the operability of the hydraulic equipment with a maximum productivity during a long period;
– They have good antiwear properties that minimise wear of the parts related to hydraulic pumps, hydraulic directional valves and hydrocylinders, servo motors thus ensuring their long service life and reducing the costs for spare parts;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of the hydraulic system parts thus also protecting precision pairs against wear, extending the equipment life and increasing its efficiency;
– The highest thermo-oxidative and thermal stability, resistance to mechanical and chemical impact reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to excellent anticorrosion properties, they protect surfaces of all used metals and alloys against a corrosive impact of acids, oxidation products and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing temperature, good fluidity at low temperatures;
– The resistance to foam formation and aeration enhance efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
– It has an extended service life (the service interval is more than 5,000 hours of running time).
It is recommended to be used as a power fluid for industrial precision hydraulic systems:
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.) operating at strongly varying temperatures and with the risk of water contamination;
– Stationary equipment – CNC machines and any hydraulic control and water regulation systems with servo motors when there is a risk of water contamination;
– The following types: HITACHI, DENISON, EATON VICKERS, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 3 (HVLP) or ISO 11158 (HV) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2105
Specifications : ISO Viscosity Grade 150 / DIN 51524-2 (HLP) / ISO 11158 (HM)
Recommendation / OEM Approval : AFNOR FRANCE NF E 48-603 / CONESTOGA ISO 20763 / EATON I-286-S / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / PARKER DENISON Filterability TP 02100 / SPERRY VICKERS I-286-S / US STEEL 126 / US STEEL 127
Product Details
Special all-season mineral hydraulic oils created for hydraulic devices of stationary or mobile equipment operating at high and very high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of very high loads, pressures, temperatures and/or velocities.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoaming additives.
– It has good antiwear properties that minimise the wear of the parts related to hydraulic pumps thus ensuring their long service life. It reduces the traction in gear shift mechanisms, bearings, pneumatic equipment;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of the hydraulic system parts thus also protecting precision pairs from wear, extend the equipment life;
– A high thermo-oxidative and thermal stability reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to good anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, sufficiently low freezing point and a long service life;
– The resistance to foam formation enhances the efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, gear transmissions, pneumatic systems, etc.);
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.);
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 2 (HLP) or ISO 11158 (HM) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment especially on the operating temperatures!
$111.00
Code : MN2203
Specifications : SAE MS 1004 / ISO Viscosity Grade 68 / DIN 51524-2 (HM) / DIN 51524-3 (HVLP) / ISO 11158 (HM, HV, HVLP)
Recommendation / OEM Approval : ASTM USA D6158 / ANSI AGMA 9005-E02-RO / AIST 126 / AIST 127 / JCMAS P041 HK Hydraulic specification / GERMAN STEEL INDUSTRY SEB 181222 / BOSCH REXROTH RE 90220 / EATON M-2950-S / EATON I-286-S3 / GM LS2 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / SPERRY VICKERS M-2950-S / SPERRY VICKERS I-286-S3
Product Details
All-season mineral paraffin hydraulic oils with a high-viscosity index created for the hydraulic equipment of a mobile or stationary equipment operating at high and extra-high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of extra-high loads, pressures, temperatures and/or velocities and especially in the conditions of strongly varying temperatures.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoam additives and a viscosity modifier.
– It has an optimal viscosity in a wide range of operating temperatures in which it ensures the operability of the hydraulic equipment with a maximum productivity during a long period;
– It has excellent antiwear properties that minimise the wear of the parts related to hydraulic pumps, hydraulic directional valves and hydrocylinders thus ensuring their long service life and reducing the costs for spare parts;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of hydraulic system parts thus also protecting precision pairs from wear, extending the equipment life and increasing its efficiency;
– The highest thermo-oxidative and thermal stability, resistance to mechanical and chemical impact, including oxidation, reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to excellent anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids, oxidation products and water thus significantly reducing the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing point, good fluidity at low temperatures and a long service life;
– The resistance to foam formation and aeration enhance efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.) operating in strongly varying temperatures;
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, etc.) operating both outdoors and indoors;
– Hydraulic controls and water regulation;
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are gearboxes, gear couplings, pneumatic devices;
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 3 (HVLP) or ISO 11158 (HV) are required to be eimplemented.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2101
Specifications : ISO Viscosity Grade 32 / DIN 51524-2 (HLP) / ISO 11158 (HM)
Recommendation / OEM Approval : PARKER DENISON Filterability TP 02100 / AFNOR FRANCE NF E 48-603 / AFNOR FRANCE NF E 48-603 / CONESTOGA ISO 20763 / CONESTOGA ISO 20763 / SPERRY VICKERS I-286-S / SPERRY VICKERS I-286-S / EATON I-286-S / EATON I-286-S / US STEEL 126 / US STEEL 126 / US STEEL 127 / US STEEL 127 / MAG CINCINNATI P-68 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / PARKER DENISON HF-2 / PARKER DENISON Filterability TP 02100
Product Details
All-season mineral hydraulic oil created for hydraulic devices of stationary and mobile equipment operating in standard and high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of high loads, pressures, temperatures and/or velocities.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoaming additives.
– It has good antiwear properties that minimise the wear of the parts related to hydraulic pumps thus ensuring their long service life;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of hydraulic system parts thus also protecting precision pairs from wear and extend the equipment life;
– A high thermo-oxidative and thermal stability reduce the formation of all types of deposits and corrosive substances that increase the reliability of subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to good anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing temperature and a long service life;
– The resistance to foam formation enhances the efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, etc.);
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.);
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 2 (HLP) or ISO 11158 (HM) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2206
Specifications : SAE MS 1004 / ISO Viscosity Grade 46 / DIN 51524-2 (HM) / DIN 51524-3 (HVLP) / ISO 11158 (HM, HV, HVLP)
Recommendation / OEM Approval : ASTM USA D6158 / ANSI AGMA 9005-E02-RO / AIST 126 / AIST 127 / JCMAS P041 HK Hydraulic specification / GERMAN STEEL INDUSTRY SEB 181222 / BOSCH REXROTH RE 90220 / EATON M-2950-S / EATON I-286-S3 / GM LS2 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / SPERRY VICKERS M-2950-S / SPERRY VICKERS I-286-S3
Product Details
All-season mineral hydraulic oils created on the basis of highly-purified basic oils with a high viscosity index and a zinc-free (low-ash) additive package for the most full compliance with specific operating requirements of modern high-load and heat-stressed precision hydraulic systems, including the ones equipped with servo mechanisms and servo valves used in industrial and mobile equipment for which the manufacturer recommends using “zinc-free” hydraulic oils. They were developed taking into account the requirements for industrial hydraulic systems, mobile and stationary equipment operating in the conditions of high and extra-high loads, pressures, operating temperatures and/or velocities and especially in the conditions of strongly varying temperatures and in when there is a strong possibility or water contamination.
Zinc-free hydraulic oils have the same properties as ordinary ones, but at the same time they have a greater expected life and completely eliminate the formation of clots and “loose deposits” that obstruct filters and disrupt servo motor elements in the conditions of a humid environment and high temperatures. These “loose deposits” are formed through an interaction of zinc-containing additives and water.
Product properties:
– They contain zinc-free antiwear, anti-oxidising, anticorrosion and antifoam additives and a viscosity modifier;
– They are highly resistant to oxidation and have the highest hydrolytic stability;
– They have an optimal viscosity in a wide range of operating temperatures in which they ensure the operability of the hydraulic equipment with a maximum productivity during a long period;
– They have good antiwear properties that minimise wear of the parts related to hydraulic pumps, hydraulic directional valves and hydrocylinders, servo motors thus ensuring their long service life and reducing the costs for spare parts;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of the hydraulic system parts thus also protecting precision pairs against wear, extending the equipment life and increasing its efficiency;
– The highest thermo-oxidative and thermal stability, resistance to mechanical and chemical impact reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to excellent anticorrosion properties, they protect surfaces of all used metals and alloys against a corrosive impact of acids, oxidation products and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing temperature, good fluidity at low temperatures;
– The resistance to foam formation and aeration enhance efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
– It has an extended service life (the service interval is more than 5,000 hours of running time).
It is recommended to be used as a power fluid for industrial precision hydraulic systems:
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.) operating at strongly varying temperatures and with the risk of water contamination;
– Stationary equipment – CNC machines and any hydraulic control and water regulation systems with servo motors when there is a risk of water contamination;
– The following types: HITACHI, DENISON, EATON VICKERS, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 3 (HVLP) or ISO 11158 (HV) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment!
$111.00
Code : MN2104
Specifications : ISO Viscosity Grade 100 / DIN 51524-2 (HLP) / ISO 11158 (HM)
Recommendation / OEM Approval : AFNOR FRANCE NF E 48-603 / CONESTOGA ISO 20763 / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER ENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / PARKER DENISON Filterability TP 02100 / SPERRY VICKERS I-286-S / EATON I-286-S / US STEEL 126 / 127
Product Details
Special all-season mineral hydraulic oils created for hydraulic devices of stationary or mobile equipment operating at high and very high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of very high loads, pressures, temperatures and/or velocities.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoaming additives.
– It has good antiwear properties that minimise the wear of the parts related to hydraulic pumps thus ensuring their long service life. It reduces the traction in gear shift mechanisms, bearings, pneumatic equipment;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of the hydraulic system parts thus also protecting precision pairs from wear, extend the equipment life;
– A high thermo-oxidative and thermal stability reduce the formation of all types of deposits and corrosive substances that increase the reliability of the subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to good anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, sufficiently low freezing point and a long service life;
– The resistance to foam formation enhances the efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, gear transmissions, pneumatic systems, etc.);
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.);
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 2 (HLP) or ISO 11158 (HM) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment especially on the operating temperatures!
$111.00
Code : MN2103
Specifications : ISO Viscosity Grade 68 / DIN 51524-2 (HLP) / ISO 11158 (HM)
Recommendation / OEM Approval : AFNOR FRANCE NF E 48-603 / CONESTOGA ISO 20763 / EATON I-286-S / MAG CINCINNATI P-68 / MAG CINCINNATI P-69 / MAG CINCINNATI P-70 / PARKER DENISON HF-0 / PARKER DENISON HF-1 / PARKER DENISON HF-2 / PARKER DENISON Filterability TP 02100 / SPERRY VICKERS I-286-S / US STEEL 126 / US STEEL 127
Product Details
All-season mineral hydraulic oil created for hydraulic devices of stationary and mobile equipment operating in standard and high operating temperatures. It was developed taking into account the requirements for industrial hydraulic systems operating in the conditions of high loads, pressures, temperatures and/or velocities.
Product properties:
– It contains antiwear, anti-oxidising, anticorrosion and antifoaming additives.
– It has good antiwear properties that minimise the wear of the parts related to hydraulic pumps thus ensuring their long service life;
– Modern cleaning-dispersing additives ensure an ideal cleanliness of hydraulic system parts thus also protecting precision pairs from wear and extend the equipment life;
– A high thermo-oxidative and thermal stability reduce the formation of all types of deposits and corrosive substances that increase the reliability of subsystems’ operability (valves, hydraulic directional valves, etc.) and simultaneously distinguishes itself by an excellent filtering ability;
– Due to good anticorrosion properties, it protects surfaces of all used metals and alloys against a corrosive impact of acids and water that significantly reduce the maintenance and repairs costs;
– It is characterised by excellent demulsifying properties, a low freezing temperature and a long service life;
– The resistance to foam formation enhances the efficiency of hydraulic pumps;
– It is neutral in regards to all sealing materials and paint-and-lacquer coatings compatible with mineral oils. It prevents leakages thus reducing buying costs.
It is recommended to be used as a power fluid for industrial hydraulic systems:
– Stationary equipment (pressing machines, elevators, moulding machines, robots, industrial machines, forming machines, etc.);
– Mobile equipment (construction, highway, mining, tree harvesting, various municipal and special equipment, etc.);
– The following types: DENISON, EATON VICKERS, GEROTOR, GRESEN, HPM, CESSNA, HYDRECO, WORTHINGTON, etc.
– Where there are syringe, geared, impeller, axial piston pumps in compliance with manufacturer’s requirements;
– When the oil standards DIN 51524 Part 2 (HLP) or ISO 11158 (HM) are required to be used.
In order to properly use it, thoroughly read the user’s manual of the equipment!
Reviews
There are no reviews yet.