| Size | 5 Liter, 10 Liter, 20 Liter, 60 Liter, 208 Liter |
|---|
MANNOL Traktor Superoil 15W-40 7406
$111.00
Code : MN7406
Specifications : SAE 15W-40 / 15W40 / API SG/CD
Recommendation / OEM Approval :
Product Details
An all-season economy-class mineral engine oil for modern high-load and high-speed 4-stroke diesel-powered engines of tractors with and without a turbocharger operating under harsh conditions. It was developed specially for ensuring the protection of the agricultural equipment and receiving the maximum return regardless of its operating conditions.
Product properties:
– Modern additives combined with a highest-class mineral base ensure good antifriction and antiwear properties that significantly extend the expected life of the equipment in comparison with oil analogues in all, even the most extreme, operation modes and simultaneously ensure fuel conservation;
– In contrast with analogues, it has an enhanced thermo-oxidising stability that, when combined with excellent cleaning-dispersing properties, efficiently reduces the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine parts clean throughout the entire time between replacements;
– A unique formula ensures the ageing resistance of the oil;
– It has good low-temperature properties, including a sufficiently low freezing point that would ensure a good oil pumping quality and the cranking ability of engine subsystems at low temperatures, an easy “cold start” and the reduction of the startup wear;
– It effectively protects engine parts against all types of corrosion;
– It may be used when operating on fuel with an increased sulphur content.
It is designed for all types of high-load diesel-powered engines of agricultural and other off-road equipment (construction, mining) and special equipment produced by European, American and Asian manufacturers in compliance with Euro I, II, III requirements where the required level of operating properties is CD or lower.
It may be used in petrol-powered engines with the required level of operating properties API SG or lower.
$111.00
Code : MN2502
Specifications : SAE 10W-40 / 10W40 / API CG-4/CF-4/CF/CE/CD/SF / API GL-4
Recommendation / OEM Approval : ALLISON C4 / DIN 51524-3 HVLP / CASE I H MS 1204 / CASE I H MS 1206 / CASE I H MS 1207 / CASE I H MS 1209 / CASE NEW HOLLAND MAT 3525 / CASE NEW HOLLAND MAT 3526 / CATERPILLAR TO-2 / FORD ESN-M2C86-B / FORD ESN-M2C86-C / FORD ESN-M2C134-D / FORD WSS-M2C159-B / FORD WSS-M2C159-C / FORD NEW HOLLAND 82009201 / FORD NEW HOLLAND 82009202 / FORD NEW HOLLAND 82009203 / JOHN DEERE J27 / JOHN DEERE J20C / JOHN DEERE J20D / MASSEY FERGUSON M 1135 / MASSEY FERGUSON M 1139 / MASSEY FERGUSON M 1143 / MASSEY FERGUSON M 1144 / MASSEY FERGUSON M 1145 / MB 227.1 / MB 228.1 / NEW HOLLAND MAT 3525 / NEW HOLLAND MAT 3526 / VOLVO WB 101 / EATON M-2950-S/I-286-S / SPERRY VICKERS M-2950-S/I-286-S / ZF 06A / ZF 06B (INC. 06R) / ZF 06C / ZF 07B / Others VOLVO WB 101, suitable for wet brakes / SAUER SUNDSTRAND DANFOSS Hydro Static Trans Fluid
Product Details
A truly universal all-weather semi-synthetic motor-transmission (HC-synthes) engine oil for modern diesel engines of agricultural machinery with and without turbocharger operating in difficult conditions, as well as for mechanical transmissions, wet-type braking systems and even tractor hydraulic systems. Designed specifically to solve the specific problems of agricultural machinery, to protect the equipment and get the most out of it, regardless of the conditions of its operation. Belongs to the class STOU (abbr. From Super Tractor Oil Universal).
A feature of the use of agricultural machinery is the high dependence of the operating mode on weather conditions, the possibility of round-the-clock operation, remoteness from service centers, a large assortment of additional attachments and, as a rule, low technical training of personnel. The use of MANNOL Multifarm STOU 10W-40 eliminates equipment breakdowns associated with confusion in the use of oil, when, due to the storage in the open air, the marking on containers under the influence of weather factors becomes unreadable. The use of oil makes accounting and storage easier. In the field, it is enough to take one canister and in any situation, solve the issue of adding oil to any unit.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality with a high viscosity index provide excellent anti-friction, anti-wear and extreme pressure properties, which significantly prolongs the life of the equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides fuel economy;
– Synthetic components in combination with natural antioxidants give the oil increased thermal oxidative stability, which, combined with excellent detergent-dispersant properties (TBN> 10), effectively reduces carbon and varnish formation, prevents the formation of deposits of all kinds and maintains engine parts and transmission in excellent cleanliness throughout the interval between replacements;
– A unique HC-containing formulation provides oil resistance to oxidation and aging, and due to reduced volatility and high flash point, reduces oil consumption “for waste”;
– Due to the HC-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, which provides excellent oil pumpability and cranking of engine and transmission components at low temperatures, easy “cold start” (up to -30 °С) and lower starting wear and tear;
– Effectively protects engine parts and transmissions from all types of corrosion, and seals against corrosion by acids;
– Has reduced foaming;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of highly loaded diesel engines of agricultural machinery, where the level of operational properties of CG-4 or lower is required, and for highly loaded mechanical transmissions of this equipment where a level of operational properties of GL-4 is required.
Applicable for hydraulic systems, hydrostatic and mechanical transmissions, wet brakes and multi-plate clutches, power take-off shaft and power steering for all types of tractor equipment.
It can be used in gasoline engines where API SF or lower performance is required.
$111.00
Code : MN7402
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / MB 226.9 / MAN 271 / ALLISON C4
Product Details
Highly refined economy-class mineral engine oil for highly accelerated diesel engines with and without a turbocharger. Suits high mileage engines operating in various operating conditions.
Product properties:
– High viscosity index and excellent compatibility with sealing materials help reduce the chance of the leakage and maintain the necessary oil pressure even for high mileage engines ;
– Low volatility reduces oil consumption through burning;
– A thoroughly balanced additive package ensures an efficient service of an engine in all modes of operation: cold start, increased load (off-road and uphill driving, towing, driving with maximum load) and in high-temperature ambient conditions;
– Long-lasting oil film effectively protects from wear, reduces friction and prevents corrosion;
– Ensures reliable lubrication of all engine components under all operating conditions;
– Reduces the soot and carbon formation;
– Natural antioxidants effectively counter ageing and maintain oil’s properties when using variable fuel quality (with sulphur content up to 500 ppm) due to high total base number (TBN).
Intended for the maximum protection of diesel engines of a wide car fleet (passenger cars, light SUVs, minibuses and light trucks) from Russian, European and other manufacturers.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7405
Specifications : SAE 15W-40 / 15W40 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 502 00 / VOLKSWAGEN 501 01 / VOLKSWAGEN 500 00 / MB 229.3 / MB 229.1 / PSA B71 2294 / RENAULT RN0700 / RENAULT RN0710
Product Details
All-season universal economy-class engine oil on a highly refined mineral basis for turbocharged and non-turbocharged petrol and diesel engines, including those with very high mileage, operating under various operating conditions.
Product properties:
– Compatible with all sealing materials thus reducing the leakage probability and ensuring the required oil pressure even for engines with high mileage;
– Low volatility reduces oil consumption through burning;
– A thoroughly balanced additive package ensures an efficient service of an engine in all modes of operation: cold start, increased load (off-road and uphill driving, towing, driving with maximum load) and in high-temperature ambient conditions;
– Long-lasting oil film effectively protects from wear, reduces friction and prevents corrosion;
– Ensures reliable lubrication of all engine components under all operating conditions;
– Good detergent and dispersing properties reduce ash content thus minimising the soot and carbon formation and maintaining engine components clean throughout the service life;
– Natural antioxidants effectively resist ageing.
Intended for the maximum protection of petrol and diesel engines of a wide car fleet (passenger cars, light SUVs, minibuses and light trucks) produced by Russian, European and other manufacturers.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7104
Specifications : SAE 15W-40 / 15W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather mineral-synthetic (Esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality mineral-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-friction and anti-wear properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, meanwhile, by reducing evaporation it reduces oil scaling “waste”, which enables it to be used in engines with an Long Life up to 45,000 km interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7118
Specifications : SAE 15W-40 / 15W40 / API CK-4 / ACEA E8 / ACEA E11
Recommendation / OEM Approval : MB 228.31 / MB 228.51 / VOLVO VDS-4.5 / CUMMINS CES 20086 / MAN M 3775 / IVECO (ACEA E6-2016) / DAF (ACEA E6-2016) / DETROIT DIESEL DDC93K222 / RENAULT RLD-3 / MACK EOS-4.5 / CATERPILLAR ECF-3
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity in a wide temperature range, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base of the latest generation provide the highest thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides exceptional oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 100,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN2501
Specifications : SAE 10W-30 / 10W30 / API CG-4/CF-4/CF/CE/CD/SF / API GL-4 / ACEA E3 / DIN 51524-3 HVLP
Recommendation / OEM Approval : ALLISON C4 / CASE I H MS 1204 / CASE I H MS 1206 / CASE I H MS 1207 / CASE I H MS 1209 / CASE NEW HOLLAND MAT 3525 / CASE NEW HOLLAND MAT 3526 / CATERPILLAR TO-2 / EATON M-2950-S / I-286-S / FORD ESN-M2C86-B / FORD ESN-M2C86-C / FORD ESN-M2C134-D / FORD WSS-M2C159-B / FORD WSS-M2C159-C / FORD NEW HOLLAND 82009201 / FORD NEW HOLLAND 82009202 / FORD NEW HOLLAND 82009203 / JOHN DEERE J27 / JOHN DEERE J20C / JOHN DEERE J20D / MASSEY FERGUSON M 1135 / MASSEY FERGUSON M 1139 / MASSEY FERGUSON M 1143 / MASSEY FERGUSON M 1144 / MASSEY FERGUSON M 1145 / MB 227.1 / MB 228.1 / NEW HOLLAND MAT 3525 / NEW HOLLAND MAT 3526 / SAUER SUNDSTRAND DANFOSS Hydro Static Trans Fluid / SPERRY VICKERS M-2950-S / I-286-S / ZF 06A / VOLVO WB 101 / ZF 06B (INC. 06R) / ZF 06C / ZF 07B / Others VOLVO WB 101, suitable for wet brakes
Product Details
A genuinely universal engine-transmission all-season semi-synthetic (HC-synthese) engine oil for modern diesel-powered engines of agricultural equipment with and without a turbocharger operating under harsh conditions as well as for manual transmissions, “wet”-type brake systems and even hydraulic systems of tractors. It was developed specially for solving particular agricultural equipment issues, ensuring the protection of the technical equipment and receiving the maximum return regardless of its operating conditions. It belongs to the STOU (Super Tractor Oil Universal) class.
The use of agricultural equipment is characterised by a high dependency of the operation mode and weather conditions, the possibility of a round-the-clock operation, the remoteness from service centres, a wide range of additional attachments and, most commonly, a poor technical competence of the personnel. The use of MANNOL Multifarm STOU 10W-30 eliminates the risk of the equipment issues related to the oil use confusion, when the markings on the containers become illegible due to weather conditions when stored outdoors. The oil use facilitates accounting and storage. In the field, it is enough to take one canister and resolve the issue of adding oil into any piece of equipment in any situation.
Product properties:
– Innovative additives combined with a semi-synthetic base of the highest quality with a high viscosity index ensure excellent antifriction, antiwear and anti-scuffing properties that significantly extend the expected life of the equipment in all, even most extreme, operation modes in a wide range of ambient temperatures and ensure the fuel conservation;
– Synthetic components combined with natural antioxidants give the oil an enhanced thermo-oxidising stability that, when combined with excellent cleaning-dispersing properties (TBN >10) efficiently reduce the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine and transmission parts exceptionally clean throughout the entire time between replacements;
– A unique HC-containing formula ensures the resistance of the oil to oxidation and ageing, and, due to а reduced evaporating ability and an increased flash point, the oil consumption through burning is reduced;
– Due to the HC-containing optimal-viscosity base, it has excellent low-temperature properties, including a low freezing point that would ensure an excellent oil pumping quality and the cranking ability of engine and transmission subsystems at low temperatures, an easy “cold start” (up to -30 °С) and the reduction of the startup wear;
– It effectively protects from engine and transmission parts from all types of corrosion and the seal assembly from acid corrosion;
– It has a reduced foam formation ability;
– A special additive package was developed taking into account difficult operating conditions encountered as well as the low fuel quality.
It is designed for all types of high-load diesel-powered engines of agricultural equipment, for which the required level of operating properties is CG-4 or lower and for high-load manual transmission of the aforementioned equipment for which the required level of operating properties is GL-4.
It can be used for hydraulic systems, hydrostatic and manual transmissions, wet brake systems and multiple-disc clutches, power take-off and power steering of all types of tractor equipment.
It may be used in petrol-powered engines with a required level of operating properties API SF or lower.
$111.00
Code : MN7101
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Multigrade mineral engine oil with the addition of hydrosynthetic components for modern heavy-duty and high-speed turbocharged and non-turbocharged diesel engines operating under severe conditions. Especially designed to protect your equipment and get the most out of it, regardless of its operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality ensure good anti-friction and anti-wear properties, which significantly extend the service life of the vehicle compared to analogue oils in all, even the most extreme, operating conditions, while ensuring considerable fuel savings;
– It has improved thermal-oxidative stability, which in combination with excellent detergent and dispersant properties (TBN >10) effectively reduces carbon and lacquer formation, prevents formation of all kinds of deposits and keeps engine separate parts clean throughout the whole interval between oil replacements;
– The unique formulation provides the oil with resistance to ageing and, by reducing evaporation, reduces the operating consumption, enabling it to be used in engines with extended oil change intervals (Long Life) and conventional engines;
– It has good low-temperature properties, including a low pour point, which ensures good oil pumpability and turnability of engine components at low temperatures, easy cold start and reduced starting wear;
– Effectively protects engine separate parts against all types of corrosion;
– Can be used when operating on fuels with high sulphur content.
It is intended for all types of highly loaded diesel engines of highway (long haul trucks, buses etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers meeting Euro I, II, III, IV requirements, where CH-4 level of performance properties or lower is required.
Can be used in petrol engines where the performance level API SL or lower is required.
Reviews
There are no reviews yet.