Multi-Tape – self-adhesive tape without an adhesive layer – polymerises when wound and stretched. Creates a seamless, dense and durable air- and waterproof layer-bandage, “sintering” into a homogeneous mass. It is used for effective insulation and corrosion protection of metal components of automotive, construction and agricultural machinery operating under pressure, at high temperatures and in a humid and aggressive environment, as well as in industry and in everyday life. It allows you to quickly eliminate leaks from fuel, water and air pipes. It can be applied to extreme conditions for temporary use, leaving no trace after removal.

Properties:
– Easy to use;
– Has high strength – resistant to high mechanical loads (including breaking) and wear – resistant to abrasion;
– Resistant to chemical agents, including acids, alkalis, oil and fuel;
– Resistant to micro-organisms (rotting) and pollution;
– Resistant to ageing, high temperatures, water, UV radiation;
– Has excellent electrical insulation properties;
– Fits complex shapes well – does not slip;
– Reduces the noise level;
– Tape length: 5 m.

Application:
Thanks to its flexibility, it is easily wound on any type of surface, including wet, heated and greasy surfaces.

Thread Seal Tape is a universal PTFE tape for sealing and sealing threaded connections (“foam tape”) of any materials (metal and plastic, etc.). It can be used both in the repair of cars and other equipment, and in industry and in everyday life when installing and repairing plumbing units and gas pipes.

Properties:
– Length / width / thickness: 15m / 19mm / 0.075 mm.
– Low coefficient of friction. Fluorine-containing plastic polymers (PTFE) have a very low coefficient of friction, which facilitates the connection of fittings. Perform the role of a kind of pipe thread gasket, improving the fit and seal;
– Thermo stability. PTFE has an extremely high melting point for plastic – 327 degrees. They are designed for use at temperatures up to 260⁰ C. PTFE – excellent dielectrics (electrical insulators), which is an additional plus;
– Ductility, elasticity and tensile strength. Resistant to mechanical stress. They operate at a constant pressure of up to 10 MPa and can withstand drops of up to 41 MPa. The average service life is 13 years. The fluoropolymer film does not harden after use, making it possible to reuse the threaded connection. Prolonged exposure to light slightly degrades the properties;
– Chemical and biological inertia. It is highly resistant to aggressive chemicals-acids and alkalis, oil and fuel, and any solvents. Polymers are uniformly sheathed with fluorine atoms, which make the material inert to almost all chemicals. Decomposition is possible only under extreme conditions created in special laboratories. It is not subject to rot.

Application: clean used threads with a brush or other tool from dirt and rust and degrease using 9691 MANNOL Brake Cleaner. The new thread is simply degreased. Wrap the tape on the thread, starting from the end of the thread, along the thread (to tighten the nut). Wind with a little effort so that the tape falls into the thread and stretches a little. Make the last turn just above the thread: overlap – to avoid slipping the tape. There is no need to wind too much tape (in several layers). Cut the tape from the reel.

High-quality one-component silicone sealant that hardens at room temperature. It has excellent resistance to low and high temperatures, does not lose plasticity throughout its life. Provides reliable waterproof insulation. Resistant to lubricants, antifreeze, water and fuel. Resistant on bending surfaces. Replaces asbestos, rubber, paper, cork and metal seals.
It can be effectively used to repair the following components: water pumps, oil pump flanges, thermostat housings, oil pans, transmissions, etc.

The surface to be treated must be degreased.
After 24 hours, the connection may be exposed to a load. Operating temperature range from – 40 °C to +230 °C (intermittently). Store the product in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production.

Gasket Maker Gray is a sealant that hardens at room temperature. Extremely resistant to extreme temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased.

Operating temperature range: -40 °C to +230 °C.
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production.

Gasket Maker Red is a sealant that hardens at room temperature. Extremely resistant to extreme temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased.

Operating temperature range: -50 °C to + 300 °C.
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production.