| Size | 7 Liter, 10 Liter, 20 Liter, 60 Liter, 208 Liter |
|---|
MANNOL TS-15 SHPD 20W-50 7115
$111.00
Code : MN7115
Specifications : SAE 20W-50 / 20W50 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3 / MAN M 3275-1
Product Details
Special multi-season, highly alloyed mineral engine oil with the addition of hydrosynthetics for modern, heavy duty and high-speed diesel engines with and without turbocharging, operating in extremely difficult conditions (including, at high ambient temperatures) and for engines with high mileage. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Highly viscous mineral-synthetic base with the utmost quality that meets the requirements of GLOBAL DHD-1 provides excellent anti-friction and anti-wear properties, significantly extending the life of the equipment compared to counterpart oils under the most extreme operating modes;
– Distinguished by the low sulphate ash content;
– Compared with counterparts, has higher thermal oxidation stability which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– Unique dispersant additives effectively support soot particles in suspension;
– Perfectly compatible with all types of gasketing, and has a low tendency to leakage even when worn, thanks to the high viscosity base;
– Contains components that prevent oxidation and deposition of contaminants on the pistons and O-rings; completely removed from the cylinder walls by oil control rings, which, in combination with low evaporation, significantly reduces oil waste due to scaling even on worn engines and allows it to be used in engines with long life and ordinary oils;
– The use of thickening additives of the latest generation not prone to degradation allows maintaining the required viscosity throughout the entire period between replacements;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content;
– Suitable for engines equipped with EGR recirculation system.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required. Highly recommended for heavy duty tracked vehicles.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7103
Specifications : SAE 10W-40 / 10W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
All-year-round mineral engine oil for modern heavy-duty and high-speed diesel engines with and without turbocharging operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction and anti-wear properties which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– A unique formulation provides oil resistance to ageing, meanwhile, by reducing evaporation it reduces operating consumption, which enables it to be used in engines with long life intervals up to 45.000 km and conventional engines;
– Due to the base with optimal viscosity, it has excellent low-temperature properties, a low pour point, along with good oil pumpability and turnability of engine components at low temperatures, easy “cold starts” (down to -30 °C) and reduced startup wear;
Designed for all types of heavy-duty diesel engines (long-distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CH-4 or lower is required.
Can be used in petrol engines where API SL or lower performance is required.
$111.00
Code : MN7104
Specifications : SAE 15W-40 / 15W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather mineral-synthetic (Esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality mineral-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-friction and anti-wear properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, meanwhile, by reducing evaporation it reduces oil scaling “waste”, which enables it to be used in engines with an Long Life up to 45,000 km interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7118
Specifications : SAE 15W-40 / 15W40 / API CK-4 / ACEA E8 / ACEA E11
Recommendation / OEM Approval : MB 228.31 / MB 228.51 / VOLVO VDS-4.5 / CUMMINS CES 20086 / MAN M 3775 / IVECO (ACEA E6-2016) / DAF (ACEA E6-2016) / DETROIT DIESEL DDC93K222 / RENAULT RLD-3 / MACK EOS-4.5 / CATERPILLAR ECF-3
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity in a wide temperature range, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base of the latest generation provide the highest thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides exceptional oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 100,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7120
Specifications : SAE 10W-30 / 10W30 / API CJ-4/CK-4 / ACEA E8 / ACEA E11 / JASO DH-2
Recommendation / OEM Approval : MB 228.31 / MB 228.51 / MB 235.28 / SCANIA Low Ash / MAN M 3677 / MAN M 3477 / VOLVO VDS-4 / RENAULT Truck RLD-3 / MACK EO-O Premium Plus / MACK EO-O Premium Plus -07 / MTU Type 3.1 / CATERPILLAR ECF-2 / CATERPILLAR ECF-3 / CUMMINS CES 20081 / DETROIT DIESEL DDC 93K218 / VOITH Retarder Class B
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity within the required temperature range, provides excellent anti-friction, anti-wear and anti-scuffing properties, significantly extending the life of the scenery at all operating modes in a fairly wide range of ambient temperatures along with significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides increased oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems: – DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V where a performance level of CJ-4 or lower is required.
Can be used in gasoline engines where API SN or lower performance is required.
$111.00
Code : MN7112
Specifications : SAE 10W-30 / 10W30 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : MB 228.1 / MB 228.3 / MACK EO-M Plus / MACK EO-N / MAN M 3275-1 / MTU Type 2 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / CATERPILLAR ECF-1a / CATERPILLAR ECF-2 / RENAULT RLD-2 / VOLVO VDS-3 / DETROIT DIESEL 93K215
Product Details
All-weather semi-synthetic (HC synthesis) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality and low viscosity provide excellent anti-friction, anti-wear and extreme pressure characteristics, which significantly extends the service life of the equipment in any, even the most extreme, operating conditions in a wide range of ambient temperatures, and provides significant fuel savings;
– The synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique hydrosynthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 30,000 km and conventional motors;
– Due to the hydrosynthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion and gaskets – against acid etching;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from Russian, European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7121
Specifications : SAE 10W-30 / 10W30 / API CK-4/SN / API CJ-4/CI-4 Plus / ACEA E8 / ACEA E11 / JASO DH-2
Recommendation / OEM Approval : CUMMINS CES 20086 / CUMMINS CES 20087 / RENAULT Truck RLD-4 / FORD WSS-M2C171-F1 / MB 228.31 / DETROIT DIESEL DDC93K222 / DETROIT DIESEL / DDC93K223 / MTU Type 2.1 / CATERPILLAR ECF-3 / ALLISON TES-439 / MAN M 3775 / MAN M 3575 / VOLVO VDS-4.5 Approval / RENAULT VI RLD-3 Approval / MACK EOS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the ultimate quality synthetic base, with perfect viscosity in the required temperature range provide unrivaled anti-friction, anti-wear and anti-scuffing properties, significantly extending the life of equipment in all, even the most extreme, operating modes in a rather wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique synthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
$111.00
Code : MN7101
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Multigrade mineral engine oil with the addition of hydrosynthetic components for modern heavy-duty and high-speed turbocharged and non-turbocharged diesel engines operating under severe conditions. Especially designed to protect your equipment and get the most out of it, regardless of its operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality ensure good anti-friction and anti-wear properties, which significantly extend the service life of the vehicle compared to analogue oils in all, even the most extreme, operating conditions, while ensuring considerable fuel savings;
– It has improved thermal-oxidative stability, which in combination with excellent detergent and dispersant properties (TBN >10) effectively reduces carbon and lacquer formation, prevents formation of all kinds of deposits and keeps engine separate parts clean throughout the whole interval between oil replacements;
– The unique formulation provides the oil with resistance to ageing and, by reducing evaporation, reduces the operating consumption, enabling it to be used in engines with extended oil change intervals (Long Life) and conventional engines;
– It has good low-temperature properties, including a low pour point, which ensures good oil pumpability and turnability of engine components at low temperatures, easy cold start and reduced starting wear;
– Effectively protects engine separate parts against all types of corrosion;
– Can be used when operating on fuels with high sulphur content.
It is intended for all types of highly loaded diesel engines of highway (long haul trucks, buses etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers meeting Euro I, II, III, IV requirements, where CH-4 level of performance properties or lower is required.
Can be used in petrol engines where the performance level API SL or lower is required.
$111.00
Code : MN7102
Specifications : SAE 20W-50 / 20W50 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Special multi-season, highly alloyed mineral engine oil with the addition of hydrosynthetics for modern, heavy duty and high-speed diesel engines with and without turbocharging, operating in extremely difficult conditions (including, at high ambient temperatures) and for engines with high mileage. Designed specifically to protect equipment and benefit most out of it under extreme loads.
Product properties:
– The highly viscous mineral-synthetic base of the highest quality provides good anti-friction and anti-wear properties, significantly extends the service life of equipment compared to counterpart oils in the most extreme operating modes;
– Compared with counterparts, has higher thermal oxidation stability which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– Unique dispersant additives effectively support soot particles in suspension;
– Perfectly compatible with all types of gasketing, and has a low tendency to leakage even when worn, thanks to the high viscosity base;
– Contains components that prevent oxidation and deposition of contaminants on the pistons and O-rings; completely removed from the cylinder walls by oil control rings, which, in combination with low evaporation, significantly reduces oil waste due to scaling even on worn engines and allows it to be used in engines with long life and ordinary oils;
– The use of thickening additives of the latest generation not prone to degradation allows maintaining the required viscosity throughout the entire period between replacements;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CH-4 or lower is required. Highly recommended for heavy duty tracked vehicles.
Can be used in gasoline engines where API SL or lower performance is required.
Reviews
There are no reviews yet.