Workshop Equipment
Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heights of 47-90 cm.
AH-02 Compressor Air Hose PU 10 m is a spiral compressor hose of 10 m length, designed for supplying air tools with compressed air. The hose is made of polyurethane and it is resistant to wear, tear as well as fire. The coupling is easily released and ensures a quick and comfortable connection of the compressor to air tools.
Product Characteristics:
Coupling – EU Type
Inner diameter x outer diameter- 8x12mm
Length- 10m
Material – Polyurethane
Optimal Temperature -40 °C to +85 °C
Packing unit – 25 pc
Pressure – up to 14 bar
Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heights of 47-90 cm.
Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil.
Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils.
Specification:
– 3 liter container made of robust cold-rolled stainless steel
– Metal, durable pump handle for pressure build-up even of high pressures
– Wide pump handle for simple one-hand pumping
– 2 chemical resistant high pressure hoses
– Spray tube and nozzle made of brass / stainless steel
– Various spray nozzles for every purpose
– Large filling opening for convenient filling of the container
– Adjustable carrying straps with key rings attached to the container
– With pressure relief valve
– Hose length: approx. 130cm
– Regular working pressure 1 – 3 bar
– Pressure resistant up to 8 bar
Features:
– A large 9.0 L capacity
– Manual fluid extractor can be used to extract many kinds of non-explosive liquids.
– Completely using hand pump when you without shop air.
– New safety design. when the tank is full of liquid, the vacuum will be shut off automatically.
– Fast, clean and easy operating.
– None electric spark, safety for workshop.
This 9 litres transfer pump is suitable for filling of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in the industrial sector. An automatic overfill protection with an overpressure valve ensures additional application security. Includes 3 different adapter hoses with 4, 6 and 10 mm diameter. Heat-resistant up to 60 °C. Weight: 3,0 kg.
Mobile unit is suitable for dispensing oil for mobile application. Drum trolley ensures high mobility and efficiency. Easy to move the drum in the workshop. Mobile unit for 200kgs Drum Standard model composed of grease pump, trolley, grease gun with z-swivel and connection hose.
Product Characteristics:
Technical Data: Duty of Trolley: 20-60 kgs
Inner Diameter of Grease Tank: 385 mm
Follower Plate Diameter: 370 mm
Grease Outlet Pressure: 25-30 Mpa (3,6~4,3PSI)
Air Pressure: 0.5-0.6 Mpa (71.5~85.8PSI)
Pump Ratio: 50:1
Size of Pipe: 1/2”(outside dia.), 2m. length
Description:
Industrial hose reel
Inlet/Outlet (inch) – 1/4’’
Max. pressure (psi/bar) – 218/15
Hose capacity (inch) – 1/4’’
Length (ft/m) – 50/15
Application – Air
Features:
– Fluid exchange can be done in 20 mins and exchanging speed is adjustable.
– Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal.
– The tool case can be laid down to become an umbrella for the buttons and the meter during shipping.
– Including a universal adapter.
– You will get different adapters covered for 90% car type.
– The patented adapter design gives maximum fastening performance to avoiding fluid leakage during operation.
– Take it easy with deformed ports with our easy cap adapter.
– A filter promises the fluid pass through without other things.
Product Features:
– Exclusive Deeptrans technology enhances fluid exchange performance bу 50%.
– Patented Double Wall Tank design let new fluid become warm which gives protection to transmission and pipelines.
– The high precision scale marks allows more accurate result of calibration and transfer rate. Precise manual transfer rate is guaranteed, if necessary.
– One-button control to complete processes like new/waste fluid exchanging, – quick and convenient.
– Available to check real-time changing results via two sight glasses
– Vehicle database included and can bе updated through USB port.
– Two fluid refill options
– Standard adapters work for most cars. Optional 72 types of adapter are available for special needs.
– Premium swivel casters with ideal-stop brake.
Technical data:
Voltage: AC220V 50/60Нz 1Ph
Power – 140W
Pressure gauge range 0~16Bar(0~220Psi)
Operating pressure ≤6Bar(0~87Psi)
Length of oil outlet hose – 2.5m
Length of oil return hose – 2.5m
Length of oil drain hose – 2.0m
Filter element precision – 5µm
Volume of new oil tank ≈19.5L
Volume of waste oil tank ≈15.5L
Equivalent replacement error ≤±0.05L
Мах. speed of oil exchange – 3.0L /Min
Dimension of machine: 510mm x 485mm x 1360mm
Package dimension: 495mm x 495mm x 1390mm
Product Features:
– Еnаblеs to select different modes through the intelligent operation panel;
– The distinctive double wall tank design guarantees safe operations and cleverly warms the new coolant during exchange;
– Protects the engine and pipelines in the cooling system;
– Dual pumps separate the new coolant from the used, ensuring pure fluid is transferred during exchange;
– Leak check function;
– Unique transparent body with graduations and hose collected in semicircle shape;
– Innovative design to quickly change to another type of coolant when needed within 2-3 minutes;
– DC 12 V vehicle battery cables and the compact shape allow easy access to the working place;
– Optimised structure makes maintenance easy and convenient;
– Included into the set are standard metal adapters which meet most models on the market.
Technical data:
Voltage: DC 12 V
Motor power: 120 W
Working pressure of exchanging: ≤8 bar
Working pressure of leak checking: ＜1.2 bar
Recharge/return hose length: 2.5 m
Fluid discharge hose length: 2 m
Capacity of new coolant tank: max. 20 L
Capacity of used coolant tank: max. 16 L
Pumping capacity: about 7.0 L/min
Device dimensions: 450*450*1350 mm
Cylinder for CT4101 Altoelsammler (1pc.)
Instructions:
– Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87psi ~ 116psi (6bar ~ 8bar)
– Temperature of oil shouldn’t be higher than 60°C, oil temperature of 40-60°C is suggested.
– Please ensure the valve which connect between the tank and cylinder is closed for oil draining, air pressure in the tank is not allow to get into the cylinder, otherwise it could lead to explosion of cylinder and cause body injury.
– Tank pressure of 0.7bar (10psl) for oil extraction, the maximum air pressure is nor allow to exceed 1bar (14.5psl). Please make sure to evacuate the residual compressed air out of the tank before the next time use.
Description:
Mobile unit for collection of waste oil through the oil filler hole with a help of probe, as well as in a traditional way, through the oil drain with the help of funnel. Collected oil falls into a special container and is being disposed. Intake of oil is made by compressed air pressure of 10.8 bar. Quick and easy removal of waste oil from the engine or transmission. Glass antechamber is designed to control the quality and quantity of collected oil.
Specifications:
Functions – Remove, clean, and replace fluid from most types and models of automatic gearboxes, transmissions, hydraulic torque transmissions, gearbox radiators and radiation pipelines.
Power supply – 220V, 50HZ，1PH
Pump power – 250W
Oil Inlet and Return Hoses – 3-(2x) 126 (L) x1/2(dia.) inches (1-red, 1-blue) (1) 137(L) x1/2(dia.) inches (red); All with male and female quick couplers, 300 PSL (max.) rated.
Pressure Gauges – Both 2-3/4 (dia.) inches;0~100 PSI, 20 PSI increments; 0~7 Bar, in 1 and 1/10 Bar increments.
Filter – Auto Oil Filter, 4-3/4(L) x 3(dia.) inches; 17mm x 1.7 female threads.
Fluid Capacity – 2tanks (for new and old fluids), 30L/ 8 gallons per tank.
Operating Temperature – Less than 80℃
Products for workshops and special tools
Automatic Transmission Fluid Oil Exchanger is designed to accomplish the replacement of transmission cooling oils as well as torque converter and transmission radiator fluids in the shortest time with an exchange rate of more than 90 %.
The machine is equipped with a LCD display to make the operation much more simple and convenient.
Product features:
– Automatic flow direction switch
– Automatic exchange of used and new transmission oil
– Highly accurate computerized pumping and filling of the transmission fluid
– Oil pressure and inner machine pressure are directly shown on the LCD display
– Comes with a variety of connectors suitable for a large number of European, American, Asian and other car models
– Rapid operation and high exchange rate
Automatic device for filling of air conditioning systems for hybrid vehicles for which the manufacturer prescribes the use of R134a.
Suit for: Hybrid car
Refrigerant: R134a
Mode: Fully-automatic
Screen: LCD
Specifications:
Recovery speed: 180~350G/min
Recharge speed: 800~1500G/min
Vacuum speed: 60L/min
Refrigerant tank available capacity: 14 L
Electronic scale range: 0~35KG
Oil bottle capacity: 300ML
Operating temperature: 5~50℃
Voltage： AC220v/50Hz/1PH
Max. working pressure：17.5bar
Low pressure protection：Less than 1 bar
Electronic scale precision：±10g
Compressor：275w
Specifications:
Function: collect waste oil from vehicle gear box or engine
Power: compressed air
Air Consumption: 52 Gallons/min (200L/min.)
Air Inlet Pressure(vacuum) 87~116Psi/6~8Bar
Air Inlet Pressure (Oil ejection pressure) 10~14PSI/0.7~1Bar
Vacuum Degree 0~-14Psi/0~-1Bar
Tank Capacity- 80L
Perspex cylinder Capacity (Practicable/total) -11/12L
Collect tray capacity- 20L
Height – About 1580mm~1890mm
Working Temperature – 40~60 ֯ C (for engine oil)
Oil Filter Wrench Set (15 pcs). HC – 74/76 mm – 15 flutes – 2 step HC – 74/76 mm – 14 flutes – 2 step HC – 93 mm – 15 flutes – 1 step HC – 65/67 mm – 14 flutes – 2 step HC – 73 mm – 14 flutes – 1 step HC – 80 mm – 15 flutes – 1 step HC – 68 mm – 14 flutes – 1 step HC – 93 mm – 36 flutes – 1 step HC – 90 mm – 15 flutes – 1 step HC – 75/77 mm – 15 flutes – 2 step HC – 80 mm – 15 flutes – 1 step HC – 65 mm – 14 flutes – 1 step HC – 76 mm – 30 flutes – 1 step HC – 100 mm – 15 flutes – 1 step Adapter – 1/2” dr. (F) x 3/8” (M).
Universal oil filter wrench for Spin-On Filters with diameter 51-111 mm.
Universal oil filter wrench for 110-140 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2” drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended for daily use in workshops and at home.
Universal oil filter wrench for 80-115 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2” drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended for daily use in workshops and at home.
9pc Oil Filter Wrench Set includes: 2x 14 Flutes – 64.5mm; 1x 15 Flutes – 88.2mm; 1x 16 Flutes – 74.2mm; 1x Hex – 27mm; 1x Hex – 32mm; 1x Hex – 36mm; 1x Adjustable Grip Socket: workable range 63-83mm
Aluminum Oil Filter Cup Wrench Set includes(23pcs): 1x 65mm; 1x 67mm; 2x 73mm; 5x 74mm; 2x 75mm;1x 76mm; 1x 79mm; 1x 79.5mm; 1x 84mm; 1x 89mm; 1x 90mm; 1x 91mm; 1x 92mm; 1x 95mm; 1x 101mm; 1/2″ Dr. Ratchet Handle; 12 Point 22mm wrench
Suitable for sump plugs on engine, gearbox and back axle. 3/8″ hex – 5/16″ square; 8mm hex – 3/8″ square; 9mm hex – 11mm square; 10mm hex – 13mm square; 12mm hex – 17mm square; 14mm hex – 16mm lenght tommy bar
Suitable for these products: CT4105, CT4104, CT4103, CT4112
Grease gun for grease dosing from 400g grease cartridges. High-quality design with galvanized grease tank, ergonomically shaped handle and two 300 mm safety reinforced rubber hoses. with galvanized grease tank, ergonomically shaped handle and 2 x 300 mm safety reinforced rubber hoses.
Pull out the metal rod at the end of the gun. Unscrew the housing. Remove the protection from the cartridge and insert it. Screw the housing back on. Operate the gun until the grease comes out. Tighten the hose if necessary.
Tool for leak testing/inspection of auto oil filters. Adapter measurements: 1-12UNF; 3/4-16UNF; 11/8-16UNF; 13/16-16UNF M12x1.5; M16x1.5; M18X1.5; M30x1.5; M22x1.5
Oil drain pan used to collect old oil from vehicles for an easier and cleaner oil change.
Product Characteristics:
Characteristics:
Capacity – 7 L
Colour – black
Diameter – 34 cm
Height – 10 cm
Material – polypropylene
Oil collector for collecting waste oil of vehicles with an integrated funnel and practical large handles. Ideal for easier and cleaner oil changes.
Product Characteristics:
Characteristics Method Unit Value
Capacity L 15
Colour black
Diameter cm 46 (18”)
Height cm 15 (6”)
Material 100 % polyethylene
Packing unit pc/ctn 4
Size: Length- 86,5 cm., width 39 cm., Height- 9.5 cm.
Protective cover for fenders with magnetic closure and MANNOL logo.
Designed to protect the front fender of cars during repair and maintenance work in the engine compartment while the bonnet is open. Protects the fender of the vehicle against scratches, oil as well as dirt and increases the mechanic’s work comfort.
The cover is made of high-strength as well as water-resistant material and can be easily cleaned of dirt. Thanks to the magnetic closure it ensures easy and reliable mounting and dismounting. The cover is suitable for almost all types of cars.
Flexible funnel for 10 liter canisters for motor oils and technical liquids. The funnel is screwed onto the neck of the canister, which prevents unnecessary leakage of liquid during transfusion.
Dispensing Tap for 60 and 200 Liter containers and drums are perfectly suitable for simple, clean and quick refilling of fluids without gurgling. Dispensing Tap are leak proof even with aggressive chemical compounds and strongly creeping fluids.
Pump/Soap Dispenser for accurate and makes your soap last longer
– Compatible with hand wash paste Auto Master 9957 5 liter
– Also suitable for other container with a diameter of 40 mm screw thread
– Handy pump dispenser.
A flexible tube is a pumping device for engine oils and technical fluids that screws onto the container opening and allows the contents to flow quickly, safely and easily to their destination.
Suitable for MANNOL 20 l canisters.
The innovative Dispensing Taps for 20 L MANNOL containers and 1,000 L IBC containers enable easy, clean and fast dispensing of liquids without clucking. Thanks to the patented ventilation system, the Dispensing Tap offers a very high discharge capacity with a flow rate of > 10 L/min. Dispensing Taps are characterised by their excellent tightness and high chemical resistance.
Patented quality product.
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.
Hose Clamps are multi-use hose clamps for applications with high mechanical load. With their fundamental technical characteristics they still set the standarts for the modern clip construction. This kind of clips is used with cooling water and fuel connections, oil and air lines into the under and over-pressure range.
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
