Workshop Equipment
$111.00A flexible tube is a pumping device for engine oils and technical fluids that screws onto the container opening and allows the contents to flow quickly, safely and easily to their destination.
Suitable for MANNOL 20 l canisters.
$111.00Flexible funnel for 10 liter canisters for motor oils and technical liquids. The funnel is screwed onto the neck of the canister, which prevents unnecessary leakage of liquid during transfusion.
$111.00Cylinder for CT4101 Altoelsammler (1pc.)
Instructions:
– Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87psi ~ 116psi (6bar ~ 8bar)
– Temperature of oil shouldn’t be higher than 60°C, oil temperature of 40-60°C is suggested.
– Please ensure the valve which connect between the tank and cylinder is closed for oil draining, air pressure in the tank is not allow to get into the cylinder, otherwise it could lead to explosion of cylinder and cause body injury.
– Tank pressure of 0.7bar (10psl) for oil extraction, the maximum air pressure is nor allow to exceed 1bar (14.5psl). Please make sure to evacuate the residual compressed air out of the tank before the next time use.
$111.00The innovative Dispensing Taps for 20 L MANNOL containers and 1,000 L IBC containers enable easy, clean and fast dispensing of liquids without clucking. Thanks to the patented ventilation system, the Dispensing Tap offers a very high discharge capacity with a flow rate of > 10 L/min. Dispensing Taps are characterised by their excellent tightness and high chemical resistance.
Patented quality product.
$111.00Dispensing Tap for 60 and 200 Liter containers and drums are perfectly suitable for simple, clean and quick refilling of fluids without gurgling. Dispensing Tap are leak proof even with aggressive chemical compounds and strongly creeping fluids.
$111.00Features:
– Fluid exchange can be done in 20 mins and exchanging speed is adjustable.
– Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal.
– The tool case can be laid down to become an umbrella for the buttons and the meter during shipping.
– Including a universal adapter.
– You will get different adapters covered for 90% car type.
– The patented adapter design gives maximum fastening performance to avoiding fluid leakage during operation.
– Take it easy with deformed ports with our easy cap adapter.
– A filter promises the fluid pass through without other things.
$111.00Universal oil filter wrench for 80-115 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2” drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended for daily use in workshops and at home.
$111.00Universal oil filter wrench for 110-140 mm filters. Designed for quick and easy removing and installation of oil filters. Applicable with either an 1/2” drive or a 21 mm spanner. The arm length (working area or depth respectively) is ca. 3 cm. Colour: black. Industrial quality recommended for daily use in workshops and at home.
$111.00Aluminum Oil Filter Cup Wrench Set includes(23pcs): 1x 65mm; 1x 67mm; 2x 73mm; 5x 74mm; 2x 75mm;1x 76mm; 1x 79mm; 1x 79.5mm; 1x 84mm; 1x 89mm; 1x 90mm; 1x 91mm; 1x 92mm; 1x 95mm; 1x 101mm; 1/2″ Dr. Ratchet Handle; 12 Point 22mm wrench
$111.009pc Oil Filter Wrench Set includes: 2x 14 Flutes – 64.5mm; 1x 15 Flutes – 88.2mm; 1x 16 Flutes – 74.2mm; 1x Hex – 27mm; 1x Hex – 32mm; 1x Hex – 36mm; 1x Adjustable Grip Socket: workable range 63-83mm
$111.00Grease gun for grease dosing from 400g grease cartridges. High-quality design with galvanized grease tank, ergonomically shaped handle and two 300 mm safety reinforced rubber hoses. with galvanized grease tank, ergonomically shaped handle and 2 x 300 mm safety reinforced rubber hoses.
Pull out the metal rod at the end of the gun. Unscrew the housing. Remove the protection from the cartridge and insert it. Screw the housing back on. Operate the gun until the grease comes out. Tighten the hose if necessary.
$111.00Description:
Industrial hose reel
Inlet/Outlet (inch) – 1/4’’
Max. pressure (psi/bar) – 218/15
Hose capacity (inch) – 1/4’’
Length (ft/m) – 50/15
Application – Air
$111.00Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
$111.00Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
$111.00Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
$111.00Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)