Auto Wash & Wax ASW-super shampoo concentrate with the highest washing and cleaning action for manual contact washing of cars and other vehicles with the properties of polish.
Properties:
– A special mixture of active substances-foaming agents creates very active foam and thoroughly cleans the car;
– Active detergents effectively remove all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to their excellent splitting properties;
– Due to the contained wax components, it forms a strong and transparent film that protects the body after washing and gives it an excellent long-lasting shine;
– Easily washed off with water without leaving stains, streaks, smudges and other traces;
– It is recommended to dissolve in hot water.
Compatibility: safe for paint and varnish surfaces, plastics and rubber-technical products.
Application:
In advance remove large dirt with a strong stream of water.
To prepare the working solution, the concentrate must be diluted with hot water in a ratio from 1:100 (100 ml per 10 liters of water) to 1:20, depending on the degree of soiling. Apply the solution with a sponge to the surface of the car body. Leave for 5-10 minutes to act. RUB the car body with calm movements without pressure. Wash the surface thoroughly with clean water. the pH of the solution in a ratio of 1: 100 (20 °C) is 7-8.
Speed Wax – highly effective and fast-acting polish for paintwork of car bodies and other equipment based on natural Carnauba wax to maintain them in perfect condition. Applicable to plastic and rubber parts of the car body.
Properties:
– Gives the treated paint coatings a bright glossy shine and rich color for a long time, masks scratches and damage to the coating;
– When liquid gets on the paint surface, it forms a “water-beading effect” – the effect of water beads, when the liquid remains on the surface in the form of small drops like scattered beads. This means that water flows freely from the paintwork, reducing straps and streaks that could form on its surface. This also means that any dirt and road dust will also roll off it, reducing the need for hard mechanical cleaning during the washing process, which in turn minimizes the appearance of micro-scratches and damage. The end result is a slippery paint surface that is much easier to clean and dry;
– Seals damage to the paintwork, penetrating even microscopic scratches and preventing corrosion, and further contributes to better adhesion to the paintwork of hard wax, nanoceramics, etc.;
– Protects the paintwork during frequent car wash;
– Has a long-lasting protective effect, preventing paint surfaces from the harmful effects of the environment. Restores protective properties of coatings;
– Suitable for any type of paintwork;
– Applicable to plastic and rubber parts of the car body;
– Can be applied to wet and dry surfaces;
– Suitable for polishing machines.
Application: before applying 9977 MANNOL Speed Wax, shake it hard several times, then apply it to a soft cloth, polishing cloth or sponge, then apply it with a small pressure in a circular motion, even and thin layer on the cleaned and washed paint surface, and then also – in a circular motion – polish. It is best to polish with clean microfiber.
Highly foaming shampoo concentrate with the highest washing and cleaning action for manual contact car wash.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dusty fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has the smell of sea breeze;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber products.
Application: Remove in advance large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20, depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
Tire Cleaner – a special foam cleaner for quick, easy and gentle cleaning and further maintaining the cleanliness of tires and giving them the best appearance in just one operation. It is suitable for any type of tires of any equipment and all types of rubber – without having a negative chemical effect on them.
Properties:
– Effectively dissolves and removes residues of petroleum products, including bitumen, as well as grease, dirt, salt, wear products of the brake system and asphalt, etc.;
– Restores the original properties of the rubber and the black color of the tires, gives them a gloss and prevents aging of the rubber, thereby increasing their service life;
– Further protects tires from the negative effects of the environment: moisture, dirt, petroleum products from the road, de-icing road reagents (salt) in winter, aggressive gases, etc.;
Application:
Shake the balloon well and spray on the tire from about 10-15 cm. Leave on for 3-5 minutes, then wipe with a damp sponge or rinse with water. After completing the work, check the brakes at a low speed as the vehicle may have got on the brake pads or discs. Clean them if necessary.
Universal water-resistant lithium grease in the form of an aerosol for lubricating metal, plastic and rubber parts of cars, motorcycles, electrical equipment and other equipment, as well as in the office and at home. Effectively protects against moisture, corrosion and wear.
– Does not thicken in the cold, does not drain in the heat. Retains its performance properties from – 30 °C to + 120 °C, which increases the service life of friction units;
– Due to the use of different metal cations in its composition, it has increased protective properties and reliably protects metal surfaces from corrosion;
– Reliably protects bearings and other parts from corrosion when operating the equipment in a humid and polluted environment ensuring a long service life;
– Has good anti-friction properties: effectively reduces friction and wear;
– Resistant to the action of hot and cold water, absolutely not susceptible to the action of sea water, has water-repellent and sealing properties;
– Has good adhesion to metals, forms a long-lasting, resistant to water, temperature fluctuations, dirt, lubricating film, which allows you to increase the change interval and reduce the cost of maintenance;
– Resistant to aging and oxidation. It has good chemical, thermal and mechanical stability. Maintains stability to temperature changes;
– Eliminates unpleasant creaking and grinding of door hinges, reduces the likelihood of jamming cables, drives, locks, protects non-conductive surfaces of battery terminals from oxidation;
– Meets a wide range of requirements, allowing the use of a single lubricant in most units;
– Shelf life of 5 years from the date of production.
– Not applicable for lubrication of electrical contacts.
Application: used for servicing personal and commercial vehicles, motor vehicles, electrical equipment and household power tools, agricultural and garden equipment, industrial machinery, etc. for lubrication of threaded connections, rolling and sliding bearings, hinges, all types of gears, hinges, etc.
Shake the balloon vigorously for 1-2 minutes before use. Apply a thin layer of grease to the surfaces to be treated. For hard-to-reach areas, use an extension tube.
Follow the manufacturer’s operating instructions in the equipment’s manual!
Auto Shampoo is a highly foaming super – concentrate of shampoo with the highest washing and cleaning effect for manual contact washing of cars and other vehicles, which has conservation properties.
Properties:
– A special mixture of active substances-foaming agents creates a very rich active foam and thoroughly cleans the car;
– Active detergents effectively remove all types of stains and dirt: dust, fuel, oil, grease, soot, insect residues, etc. due to their excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving stains, streaks, smudges and other traces;
– Protects the body after washing and gives it an excellent shine, especially recommended for use before putting the car in storage (long-term parking);
– Quickly dissolves in both hot (warm) and cold water. Effective even when using hard water;
– Has a pleasant citrus smell;
– Phosphate-free, biodegradable.
Compatibility: safe for paint surfaces, plastics and rubber-technical products.
Application:
Remove persistent soiling in advance with a strong stream of water.
To prepare the working solution, the concentrate must be diluted with water in a ratio of 1:100 (100 ml per 10 liters of water) to 1:20, depending on the degree of soiling. Apply the solution with a sponge to the surface of the car body. Leave for 5-10 minutes to act. RUB the car body with calm movements without pressure. Wash the surface thoroughly with clean water. The pH of the solution in a ratio of 1:100 (20 °C) is 7-7.5.
Warning: Do not store the product in direct sunlight!
Liquid Soap Concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and cleaning of walls and floors of garages and other premises.
Product properties:
– Forms rich active foam;
– Effectively removes all types of stains and dirt: oil, fat, soot, etc. due to its excellent splitting properties;
– Suitable for washing glass and polycarbonate panels;
– Easily washed off with water without leaving streaks and smudges;
– Effective even when using hard water;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces and plastics.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:20 to 1:50, depending on the degree of contamination.
Concentrated detergent with the highest washing and cleaning effect for use in foam generators (high-pressure devices) and manual foam sprayers for non-contact car washing.
Product properties:
– Forms very thick, stable active foam;
– Effectively removes all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Dissolves limescale without leaving a trace;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves an excellent glossy visual effect and a feeling of perfect cleanliness;
– Can be diluted with warm and cold water. Effective even when using hard water;
– pH-neutral.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:50 to 1:100, depending on the degree of contamination.
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns.
Application:
Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
Felgen Cleaner – a special intensive cleaner for fast, easy and gentle cleaning and further maintenance of wheels and rims of any design of cars and other equipment. Suitable for steel and light-alloy wheels with any coating (paint, powder, etc.).
Properties:
– Excellent cleaning properties and good wettability: removes the heaviest dirt: oil stains (oils, fuels, etc.), bitumen particles and other road dirt, brake pad wear products, etc.;
– Does not have a chemical effect on rubber and plastic surfaces;
– Supports disk Shine. With regular use, it will provide them with an excellent appearance and a long service life.
Application:
Shake well before applying and spray Felgen Cleaner evenly on dirty discs. Depending on the degree of contamination, leave it to act for 5-7 minutes, but do not let it dry. If there is persistent dirt, use a sponge or brush during the cleaning process. Thoroughly wash dirt and detergent residues with a strong stream of water. It is not recommended to use on heated disks or in direct sunlight.
Concentrated detergent with the highest cleaning effect for use in foam generators (high-pressure devices) for non-contact washing of the engine and similar units, as well as other metal products. It does not contain organic solvents.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt from metal surfaces: dust, fuel, oil, fat, soot, etc. due to its excellent splitting properties;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Does not contain chlorine compounds;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: to prepare the working solution, the concentrate must be diluted with water in a ratio of 1:10.
Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.
Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system.
Copper Spray – universal separating copper aerosol lubricant for various equipment elements operating under any loads (including high loads), and exposed to high temperatures and/or high humidity and/or aggressive environments. It is used to ensure easy disassembly of connections after long-term operation. Eliminates their coupling with each other under the influence of a variety of factors.
Properties:
– highest resistance to high-temperature impact;
– copper powder effectively clads the treated surfaces and gives them excellent lubricating properties;
– excellent separating action for metals and alloys in any combination;
– effectively protects against all types of corrosion;
– excellent adhesion, does not separate and does not spray even with rapid rotation of the treated surface;
– reduces noise, creaking and vibration;
– resistant to hot and salt water;
– protects against welding of contact surfaces, spikes and carbon deposits;
– universal.
Example of use:
– Repair and reduction of noise (creaking) of all types of brake systems (disc, drum, etc.);
– Lubrication and corrosion protection of propeller shaft joints, movable screw pairs, hubs, spark plug threads, screw connections, bolts, screws, etc.;
– Separating lubrication and protection against welding, burning and jamming of thermally loaded parts (connections of the exhaust system, heat exchangers, boilers, turbines and other thermal equipment).
Application: Thoroughly clean (if necessary to metal) contaminated contact surfaces from rust, carbon, oxides, scale, etc. Degrease. Shake the balloon vigorously. Apply MANNOL Copper Spray in the required amount, according to the maintenance manual. After application, clean the spray head and nozzle. You can use the cylinder as long as the cylinder does not start to blow out the clean spray gas.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy PolicyAccept
Reviews
There are no reviews yet.