Tire Cleaner – a special foam cleaner for quick, easy and gentle cleaning and further maintaining the cleanliness of tires and giving them the best appearance in just one operation. It is suitable for any type of tires of any equipment and all types of rubber – without having a negative chemical effect on them.
Properties:
– Effectively dissolves and removes residues of petroleum products, including bitumen, as well as grease, dirt, salt, wear products of the brake system and asphalt, etc.;
– Restores the original properties of the rubber and the black color of the tires, gives them a gloss and prevents aging of the rubber, thereby increasing their service life;
– Further protects tires from the negative effects of the environment: moisture, dirt, petroleum products from the road, de-icing road reagents (salt) in winter, aggressive gases, etc.;
Application:
Shake the balloon well and spray on the tire from about 10-15 cm. Leave on for 3-5 minutes, then wipe with a damp sponge or rinse with water. After completing the work, check the brakes at a low speed as the vehicle may have got on the brake pads or discs. Clean them if necessary.
Acryl Paint Chrome – quick-drying matte silver paint for painting various surfaces of the car, almost any material. Created on the basis of synthetic acrylic resins. Suitable for repairing chrome parts.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Acrylic resins provide high performance characteristics of the applied coating. It does not age, retains its color and does not fade in the sun, can withstand temperatures within 180° C, is inert to acids, alkalis, water, and is thermoplastic;
– Has excellent adhesive properties – forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.
Application:
Paint should not be applied over another coating – it should be completely removed if possible. Also be sure to remove the rust. The surface must be sanded, cleaned and degreased before painting. It is acceptable to sand not the entire surface, but only the part of it that you plan to apply paint to, and there may be a difference in tone between the old and new coating. For degreasing, we recommend using the MANNOL Brake Cleaner 9691 degreaser. It is recommended to pre-Prime the surface to be painted. Shake the paint container for at least 2 minutes immediately before use. Spray the paint from a distance of 30 cm on the surface. To achieve the best result, you need to work at a temperature of at least +20° C. To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved. After use, turn the jar upside down and spray the gas for a while to clear the nozzle and avoid clogging it. If necessary, apply a special transparent varnish over the paint.
Highly foaming shampoo concentrate with the highest washing and cleaning action for manual contact car wash.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dusty fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has the smell of sea breeze;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber products.
Application: Remove in advance large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20, depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
Lock De-Icer is an ideal car lock defroster that quickly unlocks vehicles in severe frosts. Provides fast defrosting of locks, hinges and other movable joints operated at low temperatures.
Properties:
– Thanks to its high penetrating power, it quickly defrosts frozen parts of locks, restoring their functionality;
– Contains corrosion inhibitors that prevent rust formation;
– Forms a film on the surface that has a lubricating effect;
– Prevents re-freezing;
– Regular use protects the locks from freezing even at low (down to – 50 °C) temperatures.
Tar Remover is a highly effective concentrated cleaner of resinous and other hard – to-remove dirt from all surfaces of cars, motorcycles and other equipment, as well as in everyday life in the form of an aerosol. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces;
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and micro cracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: spray 9668 MANNOL Tar Remover on the surface to be cleaned and Leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
Liquid Soap Concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and cleaning of walls and floors of garages and other premises.
Product properties:
– Forms rich active foam;
– Effectively removes all types of stains and dirt: oil, fat, soot, etc. due to its excellent splitting properties;
– Suitable for washing glass and polycarbonate panels;
– Easily washed off with water without leaving streaks and smudges;
– Effective even when using hard water;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces and plastics.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:20 to 1:50, depending on the degree of contamination.
Felgen Cleaner – a special intensive cleaner for fast, easy and gentle cleaning and further maintenance of wheels and rims of any design of cars and other equipment. Suitable for steel and light-alloy wheels with any coating (paint, powder, etc.).
Properties:
– Excellent cleaning properties and good wettability: removes the heaviest dirt: oil stains (oils, fuels, etc.), bitumen particles and other road dirt, brake pad wear products, etc.;
– Does not have a chemical effect on rubber and plastic surfaces;
– Supports disk Shine. With regular use, it will provide them with an excellent appearance and a long service life.
Application:
Shake well before applying and spray Felgen Cleaner evenly on dirty discs. Depending on the degree of contamination, leave it to act for 5-7 minutes, but do not let it dry. If there is persistent dirt, use a sponge or brush during the cleaning process. Thoroughly wash dirt and detergent residues with a strong stream of water. It is not recommended to use on heated disks or in direct sunlight.
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns.
Application:
Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
Montage Cleaner is a special high – performance cleaner for metal car parts.
Properties:
– Suitable for parts made of any metals and alloys;
– Has excellent cleaning properties;
– Applicable to brake pads and discs, clutch and transmission parts, tools, etc.;
– Removes dirt, grease, oil and other petroleum products, brake fluid, residues of burnt and evaporated technical fluids;
– Facilitates disassembly and installation of parts, saves time for disassembly, reduces the effort applied when disassembling and dismantling components and parts during car repairs;
– Suitable for cleaning vehicle bodies, oil filters, motorcycle chains and timing chains, engines, door hinges and electrical contacts, garden equipment (minitractors, motor cultivators, lawn mowers, etc.).
Application: Spray the cleaner on the dirty parts and in their joints and let it drain. After the solvents have evaporated, the parts remain clean and fat-free.
Attention: the Product may damage some paints and plastics. Before use, check the product for compatibility with them on a small invisible area of the surface.
Universal water-resistant lithium grease in the form of an aerosol for lubricating metal, plastic and rubber parts of cars, motorcycles, electrical equipment and other equipment, as well as in the office and at home. Effectively protects against moisture, corrosion and wear.
– Does not thicken in the cold, does not drain in the heat. Retains its performance properties from – 30 °C to + 120 °C, which increases the service life of friction units;
– Due to the use of different metal cations in its composition, it has increased protective properties and reliably protects metal surfaces from corrosion;
– Reliably protects bearings and other parts from corrosion when operating the equipment in a humid and polluted environment ensuring a long service life;
– Has good anti-friction properties: effectively reduces friction and wear;
– Resistant to the action of hot and cold water, absolutely not susceptible to the action of sea water, has water-repellent and sealing properties;
– Has good adhesion to metals, forms a long-lasting, resistant to water, temperature fluctuations, dirt, lubricating film, which allows you to increase the change interval and reduce the cost of maintenance;
– Resistant to aging and oxidation. It has good chemical, thermal and mechanical stability. Maintains stability to temperature changes;
– Eliminates unpleasant creaking and grinding of door hinges, reduces the likelihood of jamming cables, drives, locks, protects non-conductive surfaces of battery terminals from oxidation;
– Meets a wide range of requirements, allowing the use of a single lubricant in most units;
– Shelf life of 5 years from the date of production.
– Not applicable for lubrication of electrical contacts.
Application: used for servicing personal and commercial vehicles, motor vehicles, electrical equipment and household power tools, agricultural and garden equipment, industrial machinery, etc. for lubrication of threaded connections, rolling and sliding bearings, hinges, all types of gears, hinges, etc.
Shake the balloon vigorously for 1-2 minutes before use. Apply a thin layer of grease to the surfaces to be treated. For hard-to-reach areas, use an extension tube.
Follow the manufacturer’s operating instructions in the equipment’s manual!
Concentrated detergent with the highest cleaning effect for use in foam generators (high-pressure devices) for non-contact washing of the engine and similar units, as well as other metal products. It does not contain organic solvents.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt from metal surfaces: dust, fuel, oil, fat, soot, etc. due to its excellent splitting properties;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Does not contain chlorine compounds;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: to prepare the working solution, the concentrate must be diluted with water in a ratio of 1:10.
Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.
Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system.
Tar Remover – highly effective concentrated cleaner of resinous and other hard-to-remove dirt from any surfaces of cars, motorcycles and other equipment, as well as in everyday life. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces:
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and microcracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: Spray 9666 MANNOL Tar Remover on the surface to be cleaned and leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy PolicyAccept
Reviews
There are no reviews yet.