Size | 7 Liter, 10 Liter, 20 Liter, 60 Liter, 208 Liter, 1000 Liter |
---|
MANNOL TS-6 UHPD 10W-40 Eco 7106
$111.00
Code : MN7106
Specifications : SAE 10W-40 / 10W40 / API CI-4 / ACEA E7 / ACEA E4
Recommendation / OEM Approval : CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-M Plus / MACK EO-N / MAN M 3377 / RENAULT RXD / RENAULT RLD-2 / VOLVO VDS-3 / MAN M 3277 Approval / MB Approval 228.5 / MTU Type 3 Approval
Product Details
All-weather modern synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Mercedes-Benz, MAN and MTU centres and has their written approvals.
Product properties:
– Synthetic base of the highest quality, featuring ideal viscosity in a wide temperature range, provides unsurpassed anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provide significant fuel savings;
– The stable synthetic base in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 12.5) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts, especially the cylinder-piston group, exceptionally clean throughout the service between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval not less than 500 engine hours and conventional motors;
– Due to the synthetic base with optimal viscosity it has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to
-30 ºC) and reduced startup wear;
– Compatible with EGR and SCR systems, not suitable for systems equipped with diesel particulate filters (DPF);
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Code : MN2502
Specifications : SAE 10W-40 / 10W40 / API CG-4/CF-4/CF/CE/CD/SF / API GL-4
Recommendation / OEM Approval : ALLISON C4 / DIN 51524-3 HVLP / CASE I H MS 1204 / CASE I H MS 1206 / CASE I H MS 1207 / CASE I H MS 1209 / CASE NEW HOLLAND MAT 3525 / CASE NEW HOLLAND MAT 3526 / CATERPILLAR TO-2 / FORD ESN-M2C86-B / FORD ESN-M2C86-C / FORD ESN-M2C134-D / FORD WSS-M2C159-B / FORD WSS-M2C159-C / FORD NEW HOLLAND 82009201 / FORD NEW HOLLAND 82009202 / FORD NEW HOLLAND 82009203 / JOHN DEERE J27 / JOHN DEERE J20C / JOHN DEERE J20D / MASSEY FERGUSON M 1135 / MASSEY FERGUSON M 1139 / MASSEY FERGUSON M 1143 / MASSEY FERGUSON M 1144 / MASSEY FERGUSON M 1145 / MB 227.1 / MB 228.1 / NEW HOLLAND MAT 3525 / NEW HOLLAND MAT 3526 / VOLVO WB 101 / EATON M-2950-S/I-286-S / SPERRY VICKERS M-2950-S/I-286-S / ZF 06A / ZF 06B (INC. 06R) / ZF 06C / ZF 07B / Others VOLVO WB 101, suitable for wet brakes / SAUER SUNDSTRAND DANFOSS Hydro Static Trans Fluid
Product Details
A truly universal all-weather semi-synthetic motor-transmission (HC-synthes) engine oil for modern diesel engines of agricultural machinery with and without turbocharger operating in difficult conditions, as well as for mechanical transmissions, wet-type braking systems and even tractor hydraulic systems. Designed specifically to solve the specific problems of agricultural machinery, to protect the equipment and get the most out of it, regardless of the conditions of its operation. Belongs to the class STOU (abbr. From Super Tractor Oil Universal).
A feature of the use of agricultural machinery is the high dependence of the operating mode on weather conditions, the possibility of round-the-clock operation, remoteness from service centers, a large assortment of additional attachments and, as a rule, low technical training of personnel. The use of MANNOL Multifarm STOU 10W-40 eliminates equipment breakdowns associated with confusion in the use of oil, when, due to the storage in the open air, the marking on containers under the influence of weather factors becomes unreadable. The use of oil makes accounting and storage easier. In the field, it is enough to take one canister and in any situation, solve the issue of adding oil to any unit.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality with a high viscosity index provide excellent anti-friction, anti-wear and extreme pressure properties, which significantly prolongs the life of the equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides fuel economy;
– Synthetic components in combination with natural antioxidants give the oil increased thermal oxidative stability, which, combined with excellent detergent-dispersant properties (TBN> 10), effectively reduces carbon and varnish formation, prevents the formation of deposits of all kinds and maintains engine parts and transmission in excellent cleanliness throughout the interval between replacements;
– A unique HC-containing formulation provides oil resistance to oxidation and aging, and due to reduced volatility and high flash point, reduces oil consumption “for waste”;
– Due to the HC-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, which provides excellent oil pumpability and cranking of engine and transmission components at low temperatures, easy “cold start” (up to -30 °С) and lower starting wear and tear;
– Effectively protects engine parts and transmissions from all types of corrosion, and seals against corrosion by acids;
– Has reduced foaming;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of highly loaded diesel engines of agricultural machinery, where the level of operational properties of CG-4 or lower is required, and for highly loaded mechanical transmissions of this equipment where a level of operational properties of GL-4 is required.
Applicable for hydraulic systems, hydrostatic and mechanical transmissions, wet brakes and multi-plate clutches, power take-off shaft and power steering for all types of tractor equipment.
It can be used in gasoline engines where API SF or lower performance is required.
Code : MN7505
Specifications : SAE 10W-40 / 10W40 / API SN/CH-4
Recommendation / OEM Approval : VOLKSWAGEN 501 01 / VOLKSWAGEN 505 00
Product Details
Universal motor oil on a hydro synthetic basis, specially developed for all types of gasoline and diesel engines, including heavy-duty engines. Contains organic and inorganic molybdenum (MoS2).
Product properties:
– The HC base ensures efficient operation of the engine in all operating modes: during cold start, in urban and highway modes;
– Contains organic and inorganic molybdenum, providing unique anti-friction and extreme pressure properties. Effectively reduces wear due to a unique protective film that can withstand extreme loads;
– An effective set of antioxidants effectively resist ageing;
– A modern additive package preserves engine functionality and performance throughout the entire interval between replacements and maintains stable viscosity throughout the whole service life.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light SUVs, vans and light trucks) of European and other manufacturers. Recommended for cars of “old” brands and with high mileage. Not recommended to mix with standard engine oils.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7501
Specifications : SAE 10W-40 / 10W40 / API SN/CH-4 / ACEA A3/B4 / JASO MA2
Recommendation / OEM Approval : RENAULT RN17 / VOLKSWAGEN 505 00 / VOLKSWAGEN 502 00 / VOLKSWAGEN 501 01 / VOLKSWAGEN 500 00 / MB 229.3 / MB 229.1 / PSA B71 2296 / RENAULT RN0700 / RENAULT RN0710
Product Details
Universal ester-containing HC-synthese engine oil for modern gasoline and diesel engines with and without a turbocharger, both multi-valve and direct injection, including “old” brands and high mileage vehicles. Designed according to the requirements of European manufacturers.
Product properties:
– Ester technology in combination with HC base with an expanded range of viscosity-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban and highway modes, under increased load (off-road and uphill driving, towing, driving with maximum load), and at high ambient temperatures;
– Great for active driving. Does not lose its functionality when using variable quality fuel (with sulfur content up to 500 ppm) due to the high total base number (TBN);
– Preserves engine power parameters and functionality throughout the entire interval between replacements;
– Ester components in combination with a unique modern additive package provide excellent anti-wear and anti-friction properties due to the exceptional durability of the oil film, which, combined with good pumpability, significantly increases engine life even in vehicles with start-stop systems and during cold start;
– Excellent washing and dispersing properties, together with the highest thermal-oxidative stability, effectively prevent all types of deposits (including varnish deposits and soot) and keeps engine parts exceptionally clean throughout the entire interval between replacements;
– Suitable for engines running on liquefied natural (LNG) and petroleum (LPG) gas.
Designed for gasoline and diesel engines of a wide range of vehicles (cars, light SUVs, vans and light trucks) from European and other manufacturers. Recommended for engines of Daimler, VW, and Renault vehicles.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7114
Specifications : SAE 15W-40 / 15W40 / API CK-4 / ACEA E6 / ACEA E7 / ACEA E9 / JASO DH-2
Recommendation / OEM Approval : MB 228.31 / CATERPILLAR ECF-3 / CUMMINS CES 20086 / MAN M 3775 / DETROIT DIESEL DDC 93K222 / MACK EOS-4.5 Approval / RENAULT RLD-3 Approval / VOLVO VDS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity in a wide temperature range, provides excellent anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts in perfectly clean condition throughout the entire interval between replacements;
– A unique synthetic formulation provides increased oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems: DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V where a performance level of CJ-4 or lower is required.
Can be used in gasoline engines where API SN or lower performance is required.
Code : MN7117
Specifications : SAE 5W-30 / 5W30 / API CK-4 / ACEA E8 / ACEA E11
Recommendation / OEM Approval : VOLVO VDS 4.5 / CUMMINS CES 20086 / MAN M 3677 / IVECO (ACEA E6-2016) / DAF (ACEA E6-2016) / DETROIT DIESEL DDC93K222 / SCANIA LDF-4 / RENAULT RLD-3 / MACK EOS-4.5 / CATERPILLAR ECF-3 / MB Approval 228.51
Product Details
Energy-saving synthetic (PAO-based) motor oil for heavy duty and high-speed diesel engines of the latest generation with and without turbocharging, operating in severe conditions on low sulphur fuel. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– The unique low-viscosity synthetic PAO-containing base of the highest quality, with ideal viscosity in the required temperature range, combined with an innovative additive package, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extends the life of the equipment in all, even the most complicated, modes works in a fairly wide range of ambient temperatures and offers significant fuel savings;
– The synthetic base and special TBN boosters provide increased thermal oxidative stability, excellent detergent-dispersant properties (TBN> 10) to the oil and simultaneously low ash content, effectively reducing the formation of scaling and varnish, preventing deposits of all kinds and maintaining perfect engine parts, especially the cylinder-piston group, throughout the entire service period between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the PAO-containing base, the lower viscosity has perfect low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -35º C) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
For all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI requirements where the performance level of ACEA E6/E9 is mandatory.
Code : MN7101
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Multigrade mineral engine oil with the addition of hydrosynthetic components for modern heavy-duty and high-speed turbocharged and non-turbocharged diesel engines operating under severe conditions. Especially designed to protect your equipment and get the most out of it, regardless of its operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality ensure good anti-friction and anti-wear properties, which significantly extend the service life of the vehicle compared to analogue oils in all, even the most extreme, operating conditions, while ensuring considerable fuel savings;
– It has improved thermal-oxidative stability, which in combination with excellent detergent and dispersant properties (TBN >10) effectively reduces carbon and lacquer formation, prevents formation of all kinds of deposits and keeps engine separate parts clean throughout the whole interval between oil replacements;
– The unique formulation provides the oil with resistance to ageing and, by reducing evaporation, reduces the operating consumption, enabling it to be used in engines with extended oil change intervals (Long Life) and conventional engines;
– It has good low-temperature properties, including a low pour point, which ensures good oil pumpability and turnability of engine components at low temperatures, easy cold start and reduced starting wear;
– Effectively protects engine separate parts against all types of corrosion;
– Can be used when operating on fuels with high sulphur content.
It is intended for all types of highly loaded diesel engines of highway (long haul trucks, buses etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers meeting Euro I, II, III, IV requirements, where CH-4 level of performance properties or lower is required.
Can be used in petrol engines where the performance level API SL or lower is required.
Code : MN7110
Specifications : SAE 5W-40 / 5W40 / API CI-4/SL / ACEA E7 / ACEA E4
Recommendation / OEM Approval : MB 228.5 / MACK EO-N / MTU Type 3 / MAN M 3277 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
The universal all-season synthetic engine oil for modern high-load and high-speed diesel engines with and without turbocharging, operating in harsh conditions and at low ambient temperatures.
Product properties:
– A state-of-the-art additive package combined with a synthetic base of the highest quality, which has an ideal viscosity over a wide temperature range, provides unsurpassed anti-friction, anti-wear and extreme pressure properties, which significantly extends the service life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The synthetic base provides good thermal-oxidative stability, which in combination with excellent detergent – dispersing properties (TBN >12.5 to 15.2) and low ash content (on average 1.3%) effectively reduces carbon and varnish formation, prevents the formation of deposits of all types and maintains exceptional cleanliness of engine parts, especially the cylinder-piston group, throughout the entire interval between replacements;
– Modern formulation provides oil resistance to aging, and due to low evaporation and high flash point reduces oil consumption “on the burn”, which allows it to be used in engines with an extended oil change interval (Long Life more than 45,000 km) and conventional;
– It has excellent low-temperature properties, including a low pour point, which provides excellent oil pump ability and cranking of engine components at low temperatures, easy “cold start” ( -35 C° and below) and reduced starting wear;
– Compatible with EGR and SCR systems, not suitable for systems equipped with particulate filters (DPF);
– Effectively protects engine parts from all types of corrosion;
– Has a reduced foaming;
– Effectively combats the increase in shear forces during operation caused by an increase in viscosity due to soot dispersion;
– Can be used when working on fuel with a high sulfur content.
It is intended for all types of high-load diesel engines of highway (mainline tractors, buses, etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V, where the level of performance properties CI-4 or lower is required.
It can be used in gasoline engines where the API SL or lower performance level is required.
Code : MN7107
Specifications : SAE 10W-40 / 10W40 / API CK-4/CJ-4 / ACEA E8 / ACEA E11 / DAF (ACEA E6) / IVECO (ACEA E6)
Recommendation / OEM Approval : CATERPILLAR ECF-3 / CUMMINS CES 20086 / DETROIT DIESEL DDC 93K222 / MB 228.31 / MAN M 3775 / MACK EOS-4.5 Approval / MB Approval 228.51 / MAN M 3477 Approval / RENAULT VI RLD-3 Approval / VOLVO VDS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. The oil has successfully passed road and laboratory tests at VOLVO, Mercedes-Benz, MAN, MACK and RENAULT centres and has their written approvals.
Product properties:
– Synthetic base of the highest quality with an innovative additive pack, featuring optimal viscosity in a wide temperature range, provide ideal anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The stable synthetic base provides increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 60,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
Code : MN7202
Specifications : SAE 10W-40 / 10W40 / API SL / JASO MA/MA2
Recommendation / OEM Approval :
Product Details
A high-quality ester-containing synthetic-based engine oil for modern 4-stroke engines of two-wheeled vehicles with and without an integrated gearbox and with an oil bath clutch, with air and liquid cooling. It may be used in engines with a dry type clutch. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and synthetic components ensure a high traction coefficient in friction elements that allow avoiding their wear at the expense of avoiding the skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and driving at a constant speed thus allowing an easy gear shift;
– Due to the contained esters it has excellent lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder walls;
– It has an increased thermal oxidation stability and resistance to high temperatures, at which it preserves a strong oil film. It ensures easy cold starts during winter;
– Due to a high viscosity index, it preserves stable viscous properties in any operating conditions;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties;
– High-performance reaction inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous mineral and synthetic oils.
It was designed for petrol-powered 4-stroke engines of highway and off-road vehicles, mopeds, all-terrain vehicles, ATVs, scooters and other two-wheeled vehicles with a “wet” clutch without catalytic convectors.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age!
Code : MN7108
Specifications : SAE 5W-30 / 5W30 / ACEA E4 / ACEA E7
Recommendation / OEM Approval : VOLVO VDS-3 / MAN M 3277 / MAN M 3377 / MACK EO-N / RENAULT RLD-2 / MB Approval 228.5 / API CI-4 / MTU Type 3 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215
Product Details
Energy-saving synthetic (PAO-based) motor oil for heavy duty and high-speed diesel engines of the latest generation with and without turbocharging, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Daimler concern centres and has their written approvals.
Product properties:
– The unique low-viscosity synthetic PAO-containing base of the highest quality, with ideal viscosity in the required temperature range, combined with an innovative additive package, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extends the life of the equipment in all, even the most complicated, modes works in a fairly wide range of ambient temperatures and offers significant fuel savings;
– The synthetic PAO-containing base and the innovative additive package provide increased thermal oxidative stability and unsurpassed washing and dispersing properties to the oil (TBN > 12.5), effectively reducing the formation of scaling and varnish, preventing deposits of all kinds and maintaining perfect engine parts, especially the cylinder-piston group, throughout the entire service period between replacements;
– A unique PAO-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the PAO-containing base, the lower viscosity has perfect low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -35ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
For all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI requirements where the performance level of ACEA E4/E7 is mandatory.
Code : MN7104
Specifications : SAE 15W-40 / 15W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather mineral-synthetic (Esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality mineral-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-friction and anti-wear properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, meanwhile, by reducing evaporation it reduces oil scaling “waste”, which enables it to be used in engines with an Long Life up to 45,000 km interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
Code : MN7105
Specifications : SAE 10W-40 / 10W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather semi-synthetic (esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality semi-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30ºC) and reduced startup wear;
– Compatible with exhaust gas recirculation (EGR) systems. Reduces soot formation;
– Effectively protects engine parts from all types of corrosion;
– lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
Reviews
There are no reviews yet.