Professional waste oil drainer / extractor PNEU CT4107
$111.00
Specifications:
Function: collect waste oil from vehicle gear box or engine
Power: compressed air
Air Consumption: 52 Gallons/min (200L/min.)
Air Inlet Pressure(vacuum) 87~116Psi/6~8Bar
Air Inlet Pressure (Oil ejection pressure) 10~14PSI/0.7~1Bar
Vacuum Degree 0~-14Psi/0~-1Bar
Tank Capacity- 80L
Perspex cylinder Capacity (Practicable/total) -11/12L
Collect tray capacity- 20L
Height – About 1580mm~1890mm
Working Temperature – 40~60 ֯ C (for engine oil)
AH-02 Compressor Air Hose PU 10 m is a spiral compressor hose of 10 m length, designed for supplying air tools with compressed air. The hose is made of polyurethane and it is resistant to wear, tear as well as fire. The coupling is easily released and ensures a quick and comfortable connection of the compressor to air tools.
Product Characteristics:
Coupling – EU Type
Inner diameter x outer diameter- 8x12mm
Length- 10m
Material – Polyurethane
Optimal Temperature -40 °C to +85 °C
Packing unit – 25 pc
Pressure – up to 14 bar
Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heights of 47-90 cm.
Cylinder for CT4101 Altoelsammler (1pc.)
Instructions:
– Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87psi ~ 116psi (6bar ~ 8bar)
– Temperature of oil shouldn’t be higher than 60°C, oil temperature of 40-60°C is suggested.
– Please ensure the valve which connect between the tank and cylinder is closed for oil draining, air pressure in the tank is not allow to get into the cylinder, otherwise it could lead to explosion of cylinder and cause body injury.
– Tank pressure of 0.7bar (10psl) for oil extraction, the maximum air pressure is nor allow to exceed 1bar (14.5psl). Please make sure to evacuate the residual compressed air out of the tank before the next time use.
Automatic device for filling of air conditioning systems for hybrid vehicles for which the manufacturer prescribes the use of R134a.
Suit for: Hybrid car
Refrigerant: R134a
Mode: Fully-automatic
Screen: LCD
Specifications:
Recovery speed: 180~350G/min
Recharge speed: 800~1500G/min
Vacuum speed: 60L/min
Refrigerant tank available capacity: 14 L
Electronic scale range: 0~35KG
Oil bottle capacity: 300ML
Operating temperature: 5~50℃
Voltage： AC220v/50Hz/1PH
Max. working pressure：17.5bar
Low pressure protection：Less than 1 bar
Electronic scale precision：±10g
Compressor：275w
Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils.
Specification:
– 3 liter container made of robust cold-rolled stainless steel
– Metal, durable pump handle for pressure build-up even of high pressures
– Wide pump handle for simple one-hand pumping
– 2 chemical resistant high pressure hoses
– Spray tube and nozzle made of brass / stainless steel
– Various spray nozzles for every purpose
– Large filling opening for convenient filling of the container
– Adjustable carrying straps with key rings attached to the container
– With pressure relief valve
– Hose length: approx. 130cm
– Regular working pressure 1 – 3 bar
– Pressure resistant up to 8 bar
Description:
Industrial hose reel
Inlet/Outlet (inch) – 1/4’’
Max. pressure (psi/bar) – 218/15
Hose capacity (inch) – 1/4’’
Length (ft/m) – 50/15
Application – Air
Features:
– A large 9.0 L capacity
– Manual fluid extractor can be used to extract many kinds of non-explosive liquids.
– Completely using hand pump when you without shop air.
– New safety design. when the tank is full of liquid, the vacuum will be shut off automatically.
– Fast, clean and easy operating.
– None electric spark, safety for workshop.
Products for workshops and special tools
Automatic Transmission Fluid Oil Exchanger is designed to accomplish the replacement of transmission cooling oils as well as torque converter and transmission radiator fluids in the shortest time with an exchange rate of more than 90 %.
The machine is equipped with a LCD display to make the operation much more simple and convenient.
Product features:
– Automatic flow direction switch
– Automatic exchange of used and new transmission oil
– Highly accurate computerized pumping and filling of the transmission fluid
– Oil pressure and inner machine pressure are directly shown on the LCD display
– Comes with a variety of connectors suitable for a large number of European, American, Asian and other car models
– Rapid operation and high exchange rate
Features:
– Fluid exchange can be done in 20 mins and exchanging speed is adjustable.
– Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal.
– The tool case can be laid down to become an umbrella for the buttons and the meter during shipping.
– Including a universal adapter.
– You will get different adapters covered for 90% car type.
– The patented adapter design gives maximum fastening performance to avoiding fluid leakage during operation.
– Take it easy with deformed ports with our easy cap adapter.
– A filter promises the fluid pass through without other things.
This 9 litres transfer pump is suitable for filling of nearly all liquids. Suitable for all oils, antifreeze, water etc. Thanks to the chemical resistance, the non-corrosiveness and the temperature resistance of the HDPE construction this pump is also suitable for use in the industrial sector. An automatic overfill protection with an overpressure valve ensures additional application security. Includes 3 different adapter hoses with 4, 6 and 10 mm diameter. Heat-resistant up to 60 °C. Weight: 3,0 kg.
Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil.
Mobile unit is suitable for dispensing oil for mobile application. Drum trolley ensures high mobility and efficiency. Easy to move the drum in the workshop. Mobile unit for 200kgs Drum Standard model composed of grease pump, trolley, grease gun with z-swivel and connection hose.
Product Characteristics:
Technical Data: Duty of Trolley: 20-60 kgs
Inner Diameter of Grease Tank: 385 mm
Follower Plate Diameter: 370 mm
Grease Outlet Pressure: 25-30 Mpa (3,6~4,3PSI)
Air Pressure: 0.5-0.6 Mpa (71.5~85.8PSI)
Pump Ratio: 50:1
Size of Pipe: 1/2”(outside dia.), 2m. length
