| Size | 10 Liter, 20 Liter, 60 Liter, 208 Liter, 1000 Liter |
|---|
MANNOL TS-3 SHPD 10W-40 7103
$111.00
Code : MN7103
Specifications : SAE 10W-40 / 10W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
All-year-round mineral engine oil for modern heavy-duty and high-speed diesel engines with and without turbocharging operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction and anti-wear properties which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– A unique formulation provides oil resistance to ageing, meanwhile, by reducing evaporation it reduces operating consumption, which enables it to be used in engines with long life intervals up to 45.000 km and conventional engines;
– Due to the base with optimal viscosity, it has excellent low-temperature properties, a low pour point, along with good oil pumpability and turnability of engine components at low temperatures, easy “cold starts” (down to -30 °C) and reduced startup wear;
Designed for all types of heavy-duty diesel engines (long-distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CH-4 or lower is required.
Can be used in petrol engines where API SL or lower performance is required.
$111.00
Code : MN7107
Specifications : SAE 10W-40 / 10W40 / API CK-4/CJ-4 / ACEA E8 / ACEA E11 / DAF (ACEA E6) / IVECO (ACEA E6)
Recommendation / OEM Approval : CATERPILLAR ECF-3 / CUMMINS CES 20086 / DETROIT DIESEL DDC 93K222 / MB 228.31 / MAN M 3775 / MACK EOS-4.5 Approval / MB Approval 228.51 / MAN M 3477 Approval / RENAULT VI RLD-3 Approval / VOLVO VDS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. The oil has successfully passed road and laboratory tests at VOLVO, Mercedes-Benz, MAN, MACK and RENAULT centres and has their written approvals.
Product properties:
– Synthetic base of the highest quality with an innovative additive pack, featuring optimal viscosity in a wide temperature range, provide ideal anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The stable synthetic base provides increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 60,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
$111.00
Code : MN7101
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Multigrade mineral engine oil with the addition of hydrosynthetic components for modern heavy-duty and high-speed turbocharged and non-turbocharged diesel engines operating under severe conditions. Especially designed to protect your equipment and get the most out of it, regardless of its operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality ensure good anti-friction and anti-wear properties, which significantly extend the service life of the vehicle compared to analogue oils in all, even the most extreme, operating conditions, while ensuring considerable fuel savings;
– It has improved thermal-oxidative stability, which in combination with excellent detergent and dispersant properties (TBN >10) effectively reduces carbon and lacquer formation, prevents formation of all kinds of deposits and keeps engine separate parts clean throughout the whole interval between oil replacements;
– The unique formulation provides the oil with resistance to ageing and, by reducing evaporation, reduces the operating consumption, enabling it to be used in engines with extended oil change intervals (Long Life) and conventional engines;
– It has good low-temperature properties, including a low pour point, which ensures good oil pumpability and turnability of engine components at low temperatures, easy cold start and reduced starting wear;
– Effectively protects engine separate parts against all types of corrosion;
– Can be used when operating on fuels with high sulphur content.
It is intended for all types of highly loaded diesel engines of highway (long haul trucks, buses etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers meeting Euro I, II, III, IV requirements, where CH-4 level of performance properties or lower is required.
Can be used in petrol engines where the performance level API SL or lower is required.
$111.00
Code : MN7202
Specifications : SAE 10W-40 / 10W40 / API SL / JASO MA/MA2
Recommendation / OEM Approval :
Product Details
A high-quality ester-containing synthetic-based engine oil for modern 4-stroke engines of two-wheeled vehicles with and without an integrated gearbox and with an oil bath clutch, with air and liquid cooling. It may be used in engines with a dry type clutch. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and synthetic components ensure a high traction coefficient in friction elements that allow avoiding their wear at the expense of avoiding the skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and driving at a constant speed thus allowing an easy gear shift;
– Due to the contained esters it has excellent lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder walls;
– It has an increased thermal oxidation stability and resistance to high temperatures, at which it preserves a strong oil film. It ensures easy cold starts during winter;
– Due to a high viscosity index, it preserves stable viscous properties in any operating conditions;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties;
– High-performance reaction inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous mineral and synthetic oils.
It was designed for petrol-powered 4-stroke engines of highway and off-road vehicles, mopeds, all-terrain vehicles, ATVs, scooters and other two-wheeled vehicles with a “wet” clutch without catalytic convectors.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age!
$111.00
Code : MN7105
Specifications : SAE 10W-40 / 10W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather semi-synthetic (esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality semi-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30ºC) and reduced startup wear;
– Compatible with exhaust gas recirculation (EGR) systems. Reduces soot formation;
– Effectively protects engine parts from all types of corrosion;
– lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7512
Specifications : SAE 10W-30 / 10W30 / API SN / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / ISUZU / KIA
Product Details
Hydro-synthetic universal motor oil for all types of gasoline engines. Designed to meet VW and DAIMLER requirements.
Product properties:
– The hydrosynthetic base ensures efficient operation of the engine in all operating modes: during cold start, in urban mode and in highway mode;
– Due to its good washing and dispersing properties and high thermal oxidative stability, it effectively fights against all types of deposits (carbon deposits, varnishes) and keeps engine parts clean throughout the entire interval between replacements;
– Contains an effective set of antioxidants due to which it effectively resists aging;
– Saves fuel due to the low viscosity base base;
– The hydro-synthetic base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– Applicable for diesel engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW vehicles that impose additional requirements for engine oils (according to the above specifications), when API SN or lower performance is required, as well as ACEA A3/B4.
The oil is not suitable for use in heavy trucks and similar vehicles!
$999.00
Code : MN7511
Specifications : SAE 5W-30 / 5W30 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / VOLKSWAGEN 503 01 / VOLKSWAGEN 501 01 / MB 229.3 / MB 229.5 / BMW LL-98 / RENAULT RN0710 / RENAULT RN0700 / FORD WSS-M2C913-B
Product Details
Innovative universal premium ester-containing engine oil for modern gasoline and diesel engines with and without turbocharging. Designed based on the requirements of European car manufacturers.
Product properties:
– Ester technology and a synthetic base with an optimal range of viscous-temperature properties ensures efficient operation of the engine in all operating modes (during cold start, in urban mode, in track mode) and in conditions of frequent temperature change patterns;
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Saves fuel due to low HTHS viscosity and optimal anti-friction properties;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements.
Designed for gasoline and diesel engines of a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler and VW vehicles with additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7112
Specifications : SAE 10W-30 / 10W30 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : MB 228.1 / MB 228.3 / MACK EO-M Plus / MACK EO-N / MAN M 3275-1 / MTU Type 2 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / CATERPILLAR ECF-1a / CATERPILLAR ECF-2 / RENAULT RLD-2 / VOLVO VDS-3 / DETROIT DIESEL 93K215
Product Details
All-weather semi-synthetic (HC synthesis) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality and low viscosity provide excellent anti-friction, anti-wear and extreme pressure characteristics, which significantly extends the service life of the equipment in any, even the most extreme, operating conditions in a wide range of ambient temperatures, and provides significant fuel savings;
– The synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique hydrosynthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 30,000 km and conventional motors;
– Due to the hydrosynthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion and gaskets – against acid etching;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from Russian, European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7402
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / MB 226.9 / MAN 271 / ALLISON C4
Product Details
Highly refined economy-class mineral engine oil for highly accelerated diesel engines with and without a turbocharger. Suits high mileage engines operating in various operating conditions.
Product properties:
– High viscosity index and excellent compatibility with sealing materials help reduce the chance of the leakage and maintain the necessary oil pressure even for high mileage engines ;
– Low volatility reduces oil consumption through burning;
– A thoroughly balanced additive package ensures an efficient service of an engine in all modes of operation: cold start, increased load (off-road and uphill driving, towing, driving with maximum load) and in high-temperature ambient conditions;
– Long-lasting oil film effectively protects from wear, reduces friction and prevents corrosion;
– Ensures reliable lubrication of all engine components under all operating conditions;
– Reduces the soot and carbon formation;
– Natural antioxidants effectively counter ageing and maintain oil’s properties when using variable fuel quality (with sulphur content up to 500 ppm) due to high total base number (TBN).
Intended for the maximum protection of diesel engines of a wide car fleet (passenger cars, light SUVs, minibuses and light trucks) from Russian, European and other manufacturers.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7121
Specifications : SAE 10W-30 / 10W30 / API CK-4/SN / API CJ-4/CI-4 Plus / ACEA E8 / ACEA E11 / JASO DH-2
Recommendation / OEM Approval : CUMMINS CES 20086 / CUMMINS CES 20087 / RENAULT Truck RLD-4 / FORD WSS-M2C171-F1 / MB 228.31 / DETROIT DIESEL DDC93K222 / DETROIT DIESEL / DDC93K223 / MTU Type 2.1 / CATERPILLAR ECF-3 / ALLISON TES-439 / MAN M 3775 / MAN M 3575 / VOLVO VDS-4.5 Approval / RENAULT VI RLD-3 Approval / MACK EOS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the ultimate quality synthetic base, with perfect viscosity in the required temperature range provide unrivaled anti-friction, anti-wear and anti-scuffing properties, significantly extending the life of equipment in all, even the most extreme, operating modes in a rather wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique synthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
$111.00
Code : MN7501
Specifications : SAE 10W-40 / 10W40 / API SN/CH-4 / ACEA A3/B4 / JASO MA2
Recommendation / OEM Approval : RENAULT RN17 / VOLKSWAGEN 505 00 / VOLKSWAGEN 502 00 / VOLKSWAGEN 501 01 / VOLKSWAGEN 500 00 / MB 229.3 / MB 229.1 / PSA B71 2296 / RENAULT RN0700 / RENAULT RN0710
Product Details
Universal ester-containing HC-synthese engine oil for modern gasoline and diesel engines with and without a turbocharger, both multi-valve and direct injection, including “old” brands and high mileage vehicles. Designed according to the requirements of European manufacturers.
Product properties:
– Ester technology in combination with HC base with an expanded range of viscosity-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban and highway modes, under increased load (off-road and uphill driving, towing, driving with maximum load), and at high ambient temperatures;
– Great for active driving. Does not lose its functionality when using variable quality fuel (with sulfur content up to 500 ppm) due to the high total base number (TBN);
– Preserves engine power parameters and functionality throughout the entire interval between replacements;
– Ester components in combination with a unique modern additive package provide excellent anti-wear and anti-friction properties due to the exceptional durability of the oil film, which, combined with good pumpability, significantly increases engine life even in vehicles with start-stop systems and during cold start;
– Excellent washing and dispersing properties, together with the highest thermal-oxidative stability, effectively prevent all types of deposits (including varnish deposits and soot) and keeps engine parts exceptionally clean throughout the entire interval between replacements;
– Suitable for engines running on liquefied natural (LNG) and petroleum (LPG) gas.
Designed for gasoline and diesel engines of a wide range of vehicles (cars, light SUVs, vans and light trucks) from European and other manufacturers. Recommended for engines of Daimler, VW, and Renault vehicles.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7405
Specifications : SAE 15W-40 / 15W40 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 502 00 / VOLKSWAGEN 501 01 / VOLKSWAGEN 500 00 / MB 229.3 / MB 229.1 / PSA B71 2294 / RENAULT RN0700 / RENAULT RN0710
Product Details
All-season universal economy-class engine oil on a highly refined mineral basis for turbocharged and non-turbocharged petrol and diesel engines, including those with very high mileage, operating under various operating conditions.
Product properties:
– Compatible with all sealing materials thus reducing the leakage probability and ensuring the required oil pressure even for engines with high mileage;
– Low volatility reduces oil consumption through burning;
– A thoroughly balanced additive package ensures an efficient service of an engine in all modes of operation: cold start, increased load (off-road and uphill driving, towing, driving with maximum load) and in high-temperature ambient conditions;
– Long-lasting oil film effectively protects from wear, reduces friction and prevents corrosion;
– Ensures reliable lubrication of all engine components under all operating conditions;
– Good detergent and dispersing properties reduce ash content thus minimising the soot and carbon formation and maintaining engine components clean throughout the service life;
– Natural antioxidants effectively resist ageing.
Intended for the maximum protection of petrol and diesel engines of a wide car fleet (passenger cars, light SUVs, minibuses and light trucks) produced by Russian, European and other manufacturers.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7104
Specifications : SAE 15W-40 / 15W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather mineral-synthetic (Esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality mineral-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-friction and anti-wear properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, meanwhile, by reducing evaporation it reduces oil scaling “waste”, which enables it to be used in engines with an Long Life up to 45,000 km interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
Reviews
There are no reviews yet.