Car care
-
$111.00
DPF Regenerator & Flush Fluid – a professional set of tools for gentle cleaning and restoring the efficiency of diesel particulate filters (DPF) without dismantling them. Suitable for all diesel engines, both naturally aspirated and turbocharged, equipped with these systems. Applicable for diesel engines equipped and not equipped with automatic regeneration systems for diesel particulate filters. Suitable for all DPF’s. The product is applied to the particulate filter using a sprayer with a compressor.
Properties:
– 9995 DPF Regenerator starts the process of regeneration of the particulate filter. Promotes complete burning of the accumulated soot, loosening it and acting as a combustion catalyst. Dissolves and removes unburned dirt from the pores of the particulate filter;
– Especially effective for vehicles operating in urban mode and in the cold season;
– Restores the full capacity of the particulate filter, and the 9996 DPF Flush Fluid washes out all the dissolved residues of the 9995 DPF Regenerator;
– Restores the original engine power by reducing the hydrodynamic resistance of the filter. Save fuel;
– Neutral low-ash formula. It evaporates without a trace and is removed from the filter.
– Extends the service life of the particulate filter and reduces the cost of operating the car. Regular use may eliminate the need to replace the DPF altogether;
– Reduces the toxicity of exhaust gases.
1. Stage with the use of DPF Regenerator 9995: Stop the engine. Cool the diesel particulate filter to less than 40 °C. Pour the entire amount of the product into the spray container. Remove one of the particulate filter sensors (pressure or temperature). Insert the spray gun into the orifice. Spray the entire volume of the product in the particulate filter at a pressure of 4 BAR. Leave to act for 20 minutes. Replace the sensor. Place the container under the exhaust pipe to collect dirt. Turn on the engine and let it run at high speed (approximately 3000 rpm) for 5 minutes, while the exhaust pipe may leak dirty black liquid.
Stop the engine. Cool the diesel particulate filter to less than 40 °C.
2. Stage with application of washing liquid 9996 DPF Flush Fluid: Pour the entire amount of the product into the spray container. Remove one of the particulate filter sensors (pressure or temperature). Insert the spray gun into the orifice. Spray the entire volume of the product in the direction of the particulate filter at a pressure of 4 BAR. Leave to act for 1-2 minutes. Insert the sensor into place. Turn on the engine and let it run at 2000 – 2500 rpm for 5 to 15 minutes until the product completely evaporates from the filter. During the cleaning process, foam flakes may escape from the exhaust pipe. Stopping the foam output indicates complete evaporation of the product.After cleaning is complete, you need to drive for 20-30 minutes on a flat road with an engine speed of about 3000 rpm (it is allowed to let the engine idle for 20-30 minutes with a warm-up to the operating temperature). After that, for the best effect, start the process of forced (manual) regeneration of the particulate filter in accordance with the instructions of the car manufacturer.
To keep the particulate filter clean, use the 9994 MANNOL DPF Filter Cleaner in the future between service periods. -
$111.00
Epoxidkitt is a two-component super-putty based on epoxy resin for quick repairs with a long-lasting effect. Fills holes, scratches, cracks, cavities, and dents. Easily mixed by hand and takes any shape. Designed to repair surfaces made of any metals and alloys (steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead, etc.) and any plastics. It can be used to eliminate leaks in the gas tank, radiator, oil pan, barrels, pipes, etc. Applicable under water. Retains its properties up to 260 °C.
Properties:
– Excellent chemical and mechanical resistance;
– Hardens quickly under all conditions, even under water;
– Durable;
– After final solidification, any mechanical processing with chip removal is possible (drilling, sawing, threading, sanding, etc.), and then painting or varnishing;
– does not contain asbestos and is an electrical insulator;
– can be used for glass, ceramics, concrete, wood, etc.Application: Thoroughly clean the surface of old paint and other coatings, dirt, fat and oil deposits. Degrease using 9691 MANNOL Brake Cleaner. Dry. For best adhesion, the surface can be roughened with sandpaper. Putty can be made at any temperature and humidity, but the optimal temperature is from +10 °С to +30 °C and humidity of 50-60%. Squeeze out of the tube and cut off the desired amount. Mash with your hands until a homogeneous warm mass is obtained. Flatten and remove excess with a spatula. Curing begins in 15 minutes. Complete hardening occurs in 1 hour. When applied under water or on an oiled surface, the compound must be pressed with a spatula until it begins to harden.
-
$111.00
Epoxy-Metal is a two-component adhesive based on epoxy resin. Quickly and reliably glues parts made of any metals and alloys (steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead, etc.) in any combination. Ideal for rapid repairs with long-term effect, for example: for sealing cracks and cavities on surfaces of any shape, restoring damaged threads, both internal and external. It can be used both in the repair of cars and other equipment, and in industry, at home and in the office. Hardens within 4 minutes. Final curing takes place within 2-3 hours, the compound acquires a high mechanical shear strength (3-5 N / mm²) and can withstand temperatures up to +150 °C.
Properties:
– excellent chemical and mechanical resistance;
– hardens quickly under all conditions, even under water;
– durable;
– after final solidification, any mechanical processing with chip removal (threading, sanding, etc.) is possible, and then painting or varnishing;
– can be used as a putty for flat surfaces;
– glues glass, ceramics, concrete, wood and their combinations.Application: Thoroughly clean the surfaces to be bonded from old paint and other coatings, dirt, grease and oil deposits. Degrease using 9691 MANNOL Brake Cleaner. Dry. Bonding can be performed at any temperature and humidity, but the optimal temperature is from +10 °C to +30 °C and humidity of 50-60%. Squeeze out the required amount of the two components from the tube and mix. The mixing ratio is 1: 1. Then apply to the surfaces that need to be glued or repaired and press them tightly together with maximum force.
-
$111.00
Epoxy-Plastic is a two-component adhesive based on epoxy resin. Quickly and extremely firmly glues all types of plastic parts: bumpers, headlights, spoilers, etc., or glues them to surfaces made of any metal and alloys, as well as to glass, ceramics, concrete, wood, etc. Thanks to its transparent matte structure, it is ideal for rapid repairs for a long period, for example: for sealing cracks and incorrectly drilled holes, small cavities on surfaces of any shape, restoring damaged threads, both internal and external. It can be used both in the repair of cars and other equipment, and in industry, at home and in the office. Hardens within 5 minutes at room temperature. It polymerizes up to 80% within 30 minutes. Final curing takes place within 2-3 hours, the compound acquires a high mechanical shear strength (3-5 N / mm2) and can withstand temperatures up to +150 °C.
Properties:
– excellent chemical and mechanical resistance;
– hardens quickly under all conditions, even under water;
– durable, shock-resistant;
– after final solidification, any mechanical processing with chip removal (threading, sanding, etc.) is possible, and then painting or varnishing;
– glues glass, ceramics, concrete, wood and their combinations.Application: Thoroughly clean the surfaces to be bonded from old paint and other coatings, dirt, grease and oil deposits. Degrease using 9691 MANNOL Brake Cleaner. Dry. Bonding can be performed at any temperature and humidity, but the optimal temperature is from +10 °C to +30 °C and humidity of 50-60%. Squeeze out the required amount of the two components from the tube and mix. The mixing ratio is 1: 1. Then apply to the surfaces that need to be glued or repaired and press them tightly together with maximum force. Store tightly closed in the original packaging under dry conditions from +5 °C to +25 °C.
-
$111.00
Felgen Cleaner – a special intensive cleaner for fast, easy and gentle cleaning and further maintenance of wheels and rims of any design of cars and other equipment. Suitable for steel and light-alloy wheels with any coating (paint, powder, etc.).
Properties:
– Excellent cleaning properties and good wettability: removes the heaviest dirt: oil stains (oils, fuels, etc.), bitumen particles and other road dirt, brake pad wear products, etc.;
– Does not have a chemical effect on rubber and plastic surfaces;
– Supports disk Shine. With regular use, it will provide them with an excellent appearance and a long service life.Application:
Shake well before applying and spray Felgen Cleaner evenly on dirty discs. Depending on the degree of contamination, leave it to act for 5-7 minutes, but do not let it dry. If there is persistent dirt, use a sponge or brush during the cleaning process. Thoroughly wash dirt and detergent residues with a strong stream of water. It is not recommended to use on heated disks or in direct sunlight. -
$111.00
Fix-Gewinde Hochfest (50 ml) – a tool for fixing all types of threads (strong fixation): bolts, nuts, studs, screws, etc. Prevents self-unscrewing of fasteners due to increased loads and vibration. Suitable for all threaded connections in all parts of cars, motorcycles, commercial vehicles as well as in industry and in everyday life. It can be used for sealing threads and narrow gaps as well as as an anti-corrosion agent.
Properties:
– Prevents loosening and firmly fixes metal threaded connections up to and including M20 in diameter;
– Completely fills the thread gaps, seals it, preventing leakage of oil, water, fuel, technical fluids and air, as well as corrosion;
– Withstands heavy loads and vibrations: applicable in engines, transmissions, gearboxes;
– Suitable for fixing bearings, support bolts, pins and plugs;
– For M10 threads, it can withstand up to 38 N•m of torque;
– Operating temperature range from -60 °C to +150 °C;
– Applicable on greasy surfaces and on the threads with a galvanized coating;Application: Apply evenly to the screw and nut. The connection is fixed in 10-20 minutes, completely solidifies in 1-3 hours. Curing occurs when there is insufficient air supply (the product is anaerobic).
-
$111.00
Fix-Gewinde Mittelfest 9924/9925-tool for fixing all types of threads (medium fixation): bolts, nuts, studs, screws, etc. Prevents self-unscrewing of fasteners due to increased loads and vibration. Suitable for all threaded connections in all parts of cars, motorcycles, commercial vehicles, as well as in industry and in everyday life. It can be used for sealing threads and narrow gaps, as well as as an anti-corrosion agent.
Properties:
– Prevents loosening and firmly fixes metal threaded connections up to and including M36 in diameter;
– Withstands heavy loads and vibrations: applicable in engines, transmissions, gearboxes;
– Completely fills the thread gaps, seals it, preventing leakage of oil, water, fuel, technical fluids and air, as well as corrosion;
– Suitable for fixing bearings, support bolts, pins and plugs;
– For M10 threads, it can withstand up to 20 N•m of torque;
– Operating temperature range from – 55 °C to + 150 °C;
– Apply on greasy surfaces and on the threads with a galvanized coating;Application: Apply evenly to the screw and nut. The connection is fixed in 10-20 minutes, completely solidified in 1-3 hours. Curing occurs when there is insufficient air supply (the product is anaerobic).
-
$111.00
Gasket Maker Black is a sealant that hardens at room temperature. Extremely resistant to high temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased.
Operating temperature range: -40 °C to +230 °C (intermittently).
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production. -
$111.00
Gasket Maker Gray is a sealant that hardens at room temperature. Extremely resistant to extreme temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased.
Operating temperature range: -40 °C to +230 °C.
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production. -
$111.00
High-quality one-component silicone sealant that hardens at room temperature. It has excellent resistance to low and high temperatures, does not lose plasticity throughout its life. Provides reliable waterproof insulation. Resistant to lubricants, antifreeze, water and fuel. Resistant on bending surfaces. Replaces asbestos, rubber, paper, cork and metal seals.
It can be effectively used to repair the following components: water pumps, oil pump flanges, thermostat housings, oil pans, transmissions, etc.The surface to be treated must be degreased.
After 24 hours, the connection may be exposed to a load. Operating temperature range from – 40 °C to +230 °C (intermittently). Store the product in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production. -
$111.00
Gasket Maker Red is a sealant that hardens at room temperature. Extremely resistant to extreme temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, etc. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased.
Operating temperature range: -50 °C to + 300 °C.
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production. -
$111.00
Gasket Maker Transparent is a high – quality one-component sealant that hardens at room temperature. It has excellent adhesive and binding properties. Suitable for bonding and sealing vehicle windshields, headlights, indicators, brake lights, etc. replaces rubber, paper and cork seals. Resistant to lubricants, coolants, water and sun. It is used for working with glass, plastic, ceramics and aluminum. It is easy to apply and remains flexible. After applying to the non-greased surface, it is smoothed and leveled with soapy water.After 24 hours, the connection may be exposed to a load.
The operating temperature of this product is -40°C to +180°C (short-term).
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production. -
$111.00
Glas Cleaner is an effective and easy – to-use tool for cleaning car windows, headlights and mirrors, including highly polluted ones, and for domestic use.
Properties:
– Effectively cleans the exterior and interior, glass, plastic, vinyl and chrome surfaces of the car from most dirt;
– Gives the treated surfaces antistatic, dirt – and water-repellent properties;
– Does not leave stains, traces and streaks;
– Does not change the optical properties of the glass;
– Neutral to rubber seals, safe for paintwork.Application: apply to the surface to be treated, wipe with a sponge or suede cloth.
-
$111.00
Glass Foam – cleaning foam for fast and effective removal of persistent dirt of various origins from car windows, mirrors, headlights, as well as from any other internal and external, transparent, mirror and smooth surfaces of vehicles, as well as in the office and at home (cleaning windows, mirrors, showcases, ceramic tiles, etc.). Suitable for cleaning chrome surfaces, stainless steel, polycarbonate, etc.
Properties:
– Effectively dissolves and removes road dirt, stains of various petroleum products, silicone film, matte coating, traces of insects and plants, food contamination, including oil and fat;
– Restores the Shine and transparency of glass and mirror surfaces;
– Creates an anti-glare layer on the surface of car windows and thus increases driving safety;
– Does not change the optical properties of the glass, does not leave streaks;
– Great for removing tobacco plaque;
– Neutral to sealing materials, rubbers, plastics and painted surfaces of the body.Application: shake the balloon before use. Spray evenly on the surface to be cleaned, leave for a while to act, then wipe with a clean cloth or paper napkin. A minimum amount of foam is required to clean the surface from stains.
-
$111.00
Hand Automaster – cleaning paste for hands. It is intended for cleaning hands from strong industrial and household pollution both in auto repair shops and in the household.
Properties:
– Contains non-hazardous food solvents, surfactants and abrasive powder;
– Has a slightly alkaline pH value of ordinary solid soap (pH 9,5) – not dangerous for the skin of hands;
– Gently and effectively removes the most ingrained dirt and the most persistent dirt, including: oils, resins, bitumen, paints, varnishes, adhesives, sealants, soot, carbon deposits, etc. without having a harmful effect on the hands, without damaging the skin and leaving a pleasant feeling on the skin;
– Hypoallergenic.Application: wet your hands with water and apply a small amount of paste, rub thoroughly and rinse with water. Repeat the procedure if necessary.
-
$111.00
Hand Gel Cleaner – hand sanitizing and cleansing gel. It is a ready-to-use disinfectant (skin antiseptic) intended for the hygienic treatment of hands in everyday life, in public places and on transport.
Properties:
– Contains up to 80% isopropyl alcohol, which kills almost all known microbes, viruses and bacteria;
– Contains moisturizing ingredients – does not dry the skin of the hands, does not have a harmful effect on healthy skin and does not damage it.Application: ATTENTION! For external use only! Do not treat mucous membranes and wounds! Do not apply to the face if it is sensitive to chemicals. It is recommended to apply at least 3 ml of the product to dry hands (without first washing with soap and water) and rub it into the skin until it dries, but not less than 30 seconds. Pay attention to the thorough treatment of the skin between the fingers and fingertips!
