| Size | 1 Liter, 5 Liter, 10 Liter, 20 Liter, 60 Liter, 208 Liter, 1000 Liter |
|---|
MANNOL Energy Formula PD 5W-40 7913
$999.00
Code : MN7913
Specifications : SAE 5W-40 / 5W40 / API SN / ACEA C3 / ACEA C2
Recommendation / OEM Approval : MB 229.31 / MB 226.5 / GM dexos2 / PORSCHE A40 / VOLKSWAGEN 505 00 / VOLKSWAGEN 505 01 / RENAULT RN0700 / RENAULT RN0710 / FORD WSS-M2C917-A / MB Approval 229.51 / BMW LL-04 / FIAT 9.55535-S2 / FIAT 9.55535-GH2 / RENAULT RN17 / CHRYSLER MS-11106
Product Details
Innovative universal energy-saving ester-containing fully synthetic premium motor oil for modern diesel engines (including those with direct injection) and gasoline engines with and without turbocharging, including those equipped with pump nozzles (Pumpe-Duse). Designed based on VW and DAIMLER requirements.
Product properties:
– Due to the contained ester components it has excellent anti-seize, anti-wear and anti-friction properties;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– Saves fuel due to reduced high-temperature viscosity HTHS optimal antifriction properties;
– The ester components in combination with a synthetic base guarantee an easy low-temperature engine starting due to exceptional indicators of cranking and pumpability, which significantly reduces engine starting wear;
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Compatible with all exhaust gas aftertreatment systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Suitable for engines using liquefied natural gas (LNG) and (LPG) petroleum gas.
Designed for gasoline and diesel engines of the EURO IV and EURO V standard of a wide fleet of cars (cars, light SUVs, minibuses and light trucks) of European and other manufacturers).
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00 – $1,111.00
Code : MN7707
Specifications : SAE 5W-30 / 5W30 / API SN / ACEA A5/B5
Recommendation / OEM Approval : FORD WSS-M2C913-D / FORD WSS-M2C913-C / FORD WSS-M2C913-B / FORD WSS-M2C913-A / VOLVO VCC 95200377 (Service Fill) / MB 229.6 / FIAT 9.55535-G1 / JAGUAR STJLR.03.5003 / LAND ROVER STJLR.03.5003
Product Details
Innovative energy-saving ester-containing fully synthetic premium engine oil specially developed for modern diesel engines and a number of petrol engines in FORD and VOLVO vehicles, considering the requirements for heavy-duty operation and extended engine oil change intervals. The oil can be used in petrol and diesel engines of European and Asian car manufacturers requiring API SN and ACEA A5/B5 oils.
Product properties:
– Ester components provide excellent anti-wear and anti-friction properties due to the exceptional durability of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” mode;
– Significantly saves fuel due to the reduced high-temperature viscosity (HTHS) and excellent anti-friction properties;
– Effectively protects the timing belt from wear, offers an increased total base number (TBN) and excellent compatibility with sealing materials, following additional requirements of FORD;
– Provides easy, low-temperature engine starting due to its excellent pumpability and particularly turnability, which significantly reduces engine starting wear;
– Effectively protects the timing belt from wear, offers an increased total base number (TBN) and excellent compatibility with sealing materials, following additional requirements of FORD;
– A synthetic base guarantees low volatility and reduced operating consumption;
– Excellent washing and dispersing properties, together with the highest thermal-oxidative stability, effectively prevent all types of deposits and keep engine separate parts clean throughout the oil change interval;
– Due to its high thermal-oxidative stability, it resists ageing effectively, thus extending the oil change interval;
– Suits bio diesel engines.
Designed for diesel engines of passenger vehicles by FORD, VOLVO and GM, where SAE 5W-30 oil is recommended, which complies with the ACEA A5/B5 standard and meets FORD WSS-M2C913-D specification, as well as for petrol and diesel engines of these brands where previous specifications 913-C, 913-B and 913-A oils are recommended.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00 – $2,111.00
Code : MN7722
Specifications : SAE 0W-20 / 0W20 / ACEA C5 / API SP (RC)
Recommendation / OEM Approval : VOLKSWAGEN TL 52 577 / PORSCHE C20 / VOLKSWAGEN 508 00 Approval / VOLKSWAGEN 509 00 Approval
Product Details
Innovative energy-saving, low-viscosity, fully synthetic (PAO-based) premium engine oil for the latest models of Volkswagen turbocharged gasoline (distributed or direct injection) and diesel engines equipped with gasoline (GPFs) or diesel (DPFs) particulate filters.
Product Properties:
– Due to the synthetic base and a special additive package, it has excellent anti-wear, anti-friction and extreme pressure properties, which ensures long and trouble-free operation of all engine systems, including turbine units;
– Due to its excellent detergent-dispersing properties and the highest thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire replacement interval;
– Saves fuel due to its excellent anti-friction properties;
– The fully synthetic low-viscosity base and the latest-generation additive package guarantee easy low-temperature engine start-up due to exceptional cranking and pumping performance, which significantly reduces engine starting wear;
– It has an optimal viscosity over a wide temperature range (for engines in which it is recommended), which ensures their stable operation in all operating modes, including overloads;
– Due to its high thermal-oxidative stability, it effectively resists aging;
– Compatible with all exhaust gas neutralization systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional.
Compared to the previous Volkswagen specifications are increased:
– Fuel efficiency (energy-saving properties);
– Resistance to destruction under the action of shear forces;
– Thermal-oxidative stability;
– Resistance to foaming;
– Anti-friction properties.
Designed (specially created) for mandatory use in the latest 2.0 TFSI 140 kW and 3.0 TDI CR 160 kW VW and Audi engines that require compliance with the VW 508 00 or 509 00 specifications.
It is not backward compatible with previous Volkswagen specifications, and cannot be used in previous-generation VAG engines.
It is also recommended for use in engines of VW, AUDI, SEAT, SKODA and other cars that have additional requirements for engine oils according to the VW 508 00 or 509 00 specifications.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7512
Specifications : SAE 10W-30 / 10W30 / API SN / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / ISUZU / KIA
Product Details
Hydro-synthetic universal motor oil for all types of gasoline engines. Designed to meet VW and DAIMLER requirements.
Product properties:
– The hydrosynthetic base ensures efficient operation of the engine in all operating modes: during cold start, in urban mode and in highway mode;
– Due to its good washing and dispersing properties and high thermal oxidative stability, it effectively fights against all types of deposits (carbon deposits, varnishes) and keeps engine parts clean throughout the entire interval between replacements;
– Contains an effective set of antioxidants due to which it effectively resists aging;
– Saves fuel due to the low viscosity base base;
– The hydro-synthetic base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– Applicable for diesel engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW vehicles that impose additional requirements for engine oils (according to the above specifications), when API SN or lower performance is required, as well as ACEA A3/B4.
The oil is not suitable for use in heavy trucks and similar vehicles!
$999.00
Code : MN7511
Specifications : SAE 5W-30 / 5W30 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / VOLKSWAGEN 503 01 / VOLKSWAGEN 501 01 / MB 229.3 / MB 229.5 / BMW LL-98 / RENAULT RN0710 / RENAULT RN0700 / FORD WSS-M2C913-B
Product Details
Innovative universal premium ester-containing engine oil for modern gasoline and diesel engines with and without turbocharging. Designed based on the requirements of European car manufacturers.
Product properties:
– Ester technology and a synthetic base with an optimal range of viscous-temperature properties ensures efficient operation of the engine in all operating modes (during cold start, in urban mode, in track mode) and in conditions of frequent temperature change patterns;
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Saves fuel due to low HTHS viscosity and optimal anti-friction properties;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements.
Designed for gasoline and diesel engines of a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler and VW vehicles with additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7507
Specifications : SAE 10W-40 / 10W40 / API SN / ACEA A3/B4
Recommendation / OEM Approval : MB 229.3 / MB 229.1 / VOLKSWAGEN 505.00 / VOLKSWAGEN 502.00 / VOLKSWAGEN 501.01 / VOLKSWAGEN 500.00 / PSA B71 2294 / RENAULT RN0700 / RENAULT RN0710
Product Details
Innovative universal ester-containing engine oil on a hydrosynthetic basis for petrol and diesel engines, both new and “old” brands and with a large mileage. Developed on the basis of the requirements of European manufacturers.
Product properties:
– The ester technology and the latest generation hydrosynthetic base with an extended range of viscosity-temperature properties ensure efficient operation of the engine in all operating modes: cold start, urban mode, highway mode, as well as under increased load (when driving off-road, uphill, driving with a trailer, maximum load) and at high ambient temperatures;
– Perfect for active driving and does not lose its properties when using fuel of variable quality (with a sulfur content of up to 500 ppm) due to a large reserve of the base number (TBN);
– The hydrosynthetic ester-containing base, combined with the latest additive package, preserves the engine’s power parameters throughout the entire replacement interval;
– The unique wear reduction technology in combination with ester components provides excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, in combination with good pumpability, significantly increases the service life of the engine even in “Start-stop” driving modes and during cold start;
– Due to its excellent detergent-dispersing properties and the highest thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire replacement interval.
It is intended for gasoline and diesel engines of a wide fleet of cars (passenger cars, light SUVs, minibuses and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW cars that have additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7110
Specifications : SAE 5W-40 / 5W40 / API CI-4/SL / ACEA E7 / ACEA E4
Recommendation / OEM Approval : MB 228.5 / MACK EO-N / MTU Type 3 / MAN M 3277 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
The universal all-season synthetic engine oil for modern high-load and high-speed diesel engines with and without turbocharging, operating in harsh conditions and at low ambient temperatures.
Product properties:
– A state-of-the-art additive package combined with a synthetic base of the highest quality, which has an ideal viscosity over a wide temperature range, provides unsurpassed anti-friction, anti-wear and extreme pressure properties, which significantly extends the service life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The synthetic base provides good thermal-oxidative stability, which in combination with excellent detergent – dispersing properties (TBN >12.5 to 15.2) and low ash content (on average 1.3%) effectively reduces carbon and varnish formation, prevents the formation of deposits of all types and maintains exceptional cleanliness of engine parts, especially the cylinder-piston group, throughout the entire interval between replacements;
– Modern formulation provides oil resistance to aging, and due to low evaporation and high flash point reduces oil consumption “on the burn”, which allows it to be used in engines with an extended oil change interval (Long Life more than 45,000 km) and conventional;
– It has excellent low-temperature properties, including a low pour point, which provides excellent oil pump ability and cranking of engine components at low temperatures, easy “cold start” ( -35 C° and below) and reduced starting wear;
– Compatible with EGR and SCR systems, not suitable for systems equipped with particulate filters (DPF);
– Effectively protects engine parts from all types of corrosion;
– Has a reduced foaming;
– Effectively combats the increase in shear forces during operation caused by an increase in viscosity due to soot dispersion;
– Can be used when working on fuel with a high sulfur content.
It is intended for all types of high-load diesel engines of highway (mainline tractors, buses, etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V, where the level of performance properties CI-4 or lower is required.
It can be used in gasoline engines where the API SL or lower performance level is required.
$999.00
Code : MN7901
Specifications : SAE 0W-40 / 0W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : ACEA A3/B4 / BMW LL-04 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / MB 229.5 / MB 229.3 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / GM LL-A-025 / GM LL-B-025 / FIAT 9.55535-M2 / FORD WSS-M2C937-A / CHRYSLER MS-10725 / CHRYSLER MS-12633 / Additional_Recommended_Applications for AMG
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines. Designed in accordance with the requirements of German automakers.
Product properties:
– A unique bi-synthetic (PAO + esters) base with an expanded range of viscous and temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as at increased load (when driving on the road, uphill, with a trailer, maximum load) and at high ambient temperatures:
– Due to its excellent washing-dispersing properties and the highest thermal-oxidative stability, it effectively fights against all types of deposits and keeps engine parts and turbochargers clean throughout the entire interval between replacements;
– Low viscosity bi-synthetic base (PAO + esters) and a highly effective additive package provide reliable cold start in the most severe conditions, which significantly reduces engine starting wear;
– Due to the exceptional strength of the oil film created by the ester components, it has excellent anti-seize, anti-wear and anti-friction properties, which allows to save fuel and, combined with excellent pumpability, significantly increase engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel.
Designed for gasoline and diesel engines (with and without turbocharging) a wide fleet of cars (cars, light SUVs, minibuses and light trucks of European and other manufacturers), where the performance level of API SN / CH-4 and lower, as well as ACEA A3/B4.
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
$999.00
Code : MN7920
Recommendation / OEM Approval : SAE 0W-16 / 0W16 / API SP (RC) / ILSAC GF-6B / HONDA Ultra Green / HONDA Ultra Next / HONDA 08215-99974 / HONDA 08216-99974 / HONDA 08232-P99S1LHE / MITSUBISHI MZ102661 / MITSUBISHI MZ102662 / MITSUBISHI DiaQueen ECO Plus / NISSAN Hybrid engine / KLANM-01A04 Extra Save X Eco / TOYOTA 08880-11005
Product Details
Innovative energy-saving low-viscosity engine oil of the latest generation on a bi-synthetic (PAO + esters) basis for modern gasoline engines. Designed in accordance with the latest API SP and ILSAC GF-6 standards, it is especially recommended for hybrid cars, but it is also suitable for non-hybrid, requiring oils of such viscosity and with similar performance properties.
Product properties:
– Unsurpassed fuel economy in all modes due to ultra-low kinematic (at 100°C) and reduced high-temperature viscosity HTHS (at 150°C) and exceptional anti-friction properties;
– Highly effective additive package and low-viscosity bi-synthetic base provide confident cold start in the most severe conditions, which significantly reduces starting engine wear and idle wear;
– It does not form deposits in the combustion chamber, especially in the area of piston rings and valves, and due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights all types of deposits in all other engine components and keeps them clean throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear properties due to the exceptional strength of the oil film even at extreme operating temperatures, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes;
– For turbocharged engines with direct injection, the unique formulation of the oil completely reduces to zero the effect of premature ignition of the LSPI (Low Speed Pre-Ignition) fuel mixture;
– Neutral to sealing materials. It eliminates leaks, in combination with reduced volatility provides extremely low oil consumption and has an increased drain interval;
– Significantly extends engine life. It is used in engines with extended oil change intervals (Long Life) and conventional.
Designed for gasoline engines of cars, light SUVs, vans and light trucks, where the performance level of API SP / ILSAC GF-6 and lower is required.
Recommended for cars: TOYOTA, HONDA, NISSAN, SUBARU, CHRYSLER, MITSUBISHI, MAZDA, SUZUKI.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7902
Specifications : SAE 10W-60 / 10W60 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 501 01 / VOLKSWAGEN 505 00 / MB 229.1 / FIAT 9.55535-H3 / PSA B71 2300
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines operating in harsh and extreme operating conditions. Designed to meet the requirements of manufacturers of sports and racing cars.
Product properties:
– The maximum range of viscous-temperature properties ensures full engine performance at very high thermal loads, extreme conditions of sporting events and during overloads;
– The ester oil components create an exceptionally resistant oil film, which provides the highest wear resistance and unsurpassed antifriction properties in extreme engine operating conditions, including in heat;
– Due to the presence of ester components, the oil acquires the highest thermo-oxidative stability which, in combination with excellent washing and dispersing properties, ensures exceptional cleanliness of engine parts throughout the entire period of oil use;
– Recommended for use in sports and racing cars;
– It can be used for vehicles with high mileage;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel;
– It is not advisable to use under normal operating conditions.
Designed for all types of gasoline (carbureted, injection and direct injection) and diesel engines (with and without turbocharging, with direct injection and without) racing, sports and specialized cars and other cars operating in high-accelerated modes, when the level of API performance properties is required SN / CH-4 and below, as well as ACEA A3 / B4.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7904
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / JASO MA2 / API CI-4/SN
Recommendation / OEM Approval : MB 229.3 / MB 226.5 / MB 229.5 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / BMW LL-01 / BMW LL-98 / PSA B71 2294 / PSA B71 2296 / FIAT 9.55535-M2 / FIAT 9.55535-N2 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10725 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative ester-containing fully synthetic premium engine oil for modern high-performance turbo diesel engines. Developed in accordance with the requirements of the VW group.
Product Properties:
– Ester-technology and synthetic base with an extended range of viscosity-temperature properties ensures efficient operation of the engine in all operating modes: cold start, urban mode, highway mode, as well as under increased load (when driving off-road, uphill, driving with a trailer, maximum load) and at high ambient temperatures;
– Excellent for active driving and does not lose its properties when using fuel of variable quality (with a sulfur content of up to 500 ppm) due to a large reserve of alkaline number (TBN);
– Synthetic ester-containing base in combination with a modern additive package preserves the power parameters of the engine throughout the entire interval between replacements;
– Ester components of the oil provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pump ability, significantly increases the service life of the engine even in “Start-stop” and cold start modes;
– Due to its excellent detergent-dispersing properties and the highest thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– Applicable for gasoline engines.
It is intended for diesel engines (with and without turbocharging) of a wide fleet of cars: passenger cars, light SUVs, minibuses and light trucks of European and other manufacturers, where the viscosity of SAE 5W-40 is required, and the level of performance properties of API CI-4/SN is required. It is recommended for use in engines of VW, Daimler, BMW cars, including those using direct fuel injection or “common rail” technology.
The oil is not suitable for use in heavy trucks and similar vehicles!
$999.00
Code : MN7923
Recommendation / OEM Approval : SAE 5W-40 / 5W40 / API SN / ACEA C3 / BMW LL-04 / GM dexos2 / MB 229.51 / PORSCHE A40 / VOLKSWAGEN 505 00 / VOLKSWAGEN 505 01 / FORD WSS-M2C917-A / RENAULT RN0710
Product Details
Innovative, universal, fully synthetic premium engine oil for modern diesel and petrol engines (including direct injection) with and without turbocharging, including those equipped with pump injectors (Pumpe-Düse).
Product properties:
- A high-quality synthetic base and a modern additive package provide excellent anti-scuffing, anti-wear and anti-friction properties.
- Due to its excellent detergent and dispersant properties and high thermal-oxidative stability, it efficiently fights all kinds of deposits and keeps engine separate parts clean throughout the entire interval between oil replacements;
- Saves fuel due to reduced HTHS and optimum anti-friction properties;
- The fully synthetic base and specially selected depressant additives ensure easy, low-temperature engine starting due to exceptional turnability and pumpability, which significantly reduces engine starting wear;
- The fully synthetic base with an extended viscosity-temperature range ensures effective engine operation in all operating conditions: cold start, city and highway driving as well as under increased loads (off-road, uphill, driving with a trailer, maximum load) and at high ambient temperatures;
- Thanks to its high thermal-oxidative stability it effectively resists ageing;
- Compatible with all exhaust gas aftertreatment systems, DPF, TWC, EGR and SCR thanks to Mid SAPS technology;
- Suitable for engines with extended oil change intervals (Long Life) and conventional engines;
- Suitable for LNG and LPG engines.
Designed for petrol and diesel engines of EURO IV and EURO V standard of a wide range of vehicles (cars, light SUVs, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, BMW, VW cars, which have additional requirements for engine oils (according to the above specifications).
$999.00
Code : MN7908
Specifications : SAE 5W-30 / 5W30 / API SN/CH-4 / ACEA C2 / ACEA C3
Recommendation / OEM Approval : VOLKSWAGEN 505.01 / BMW LL-04 / MB 229.52 / MB 229.31 / MB 226.5 / GM dexos2 / RENAULT RN0700 / RENAULT RN0710 / MB Approval 229.51
Product Details
Innovative, versatile, all-synthetic ester-containing premium synthetic engine oil for modern diesel and gas turbocharged and non-turbocharged engines. Designed in accordance with the requirements of European automakers.
Product properties:
– High fuel efficiency due to optimal antifriction properties;
– Highly effective additive package and synthetic base provide confident cold start in any conditions, thereby significantly reducing engine starting wear;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– The presence of ester components in combination with optimal viscosity-temperature characteristics guarantees the highest strength of the oil film, which provides excellent anti-wear properties which, combined with excellent pumpability, significantly increase engine life even in the most severe operating conditions;
– Compatible with all exhaust gas aftertreatment systems;
– Suitable for engines using liquefied natural gas (LNG) and liquefied petroleum (LPG) gas;
– It is applied in engines with the extended interval of replacement of oil (Long Life) to 40 000 km and ordinary.
Designed for gasoline and diesel engines in a wide fleet of cars, light SUVs, minibuses and light trucks of European and other manufacturers, where the performance level of ACEA C3 is required.
Due to its versatility, it is especially recommended for taxi fleets.
The oil is not suitable for use in heavy trucks and similar vehicles!
Reviews
There are no reviews yet.