Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.
Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system.
Highly foaming shampoo concentrate with the highest washing and cleaning action for manual contact car wash.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dusty fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has the smell of sea breeze;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber products.
Application: Remove in advance large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20, depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
Liquid Soap Concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and cleaning of walls and floors of garages and other premises.
Product properties:
– Forms rich active foam;
– Effectively removes all types of stains and dirt: oil, fat, soot, etc. due to its excellent splitting properties;
– Suitable for washing glass and polycarbonate panels;
– Easily washed off with water without leaving streaks and smudges;
– Effective even when using hard water;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces and plastics.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:20 to 1:50, depending on the degree of contamination.
Copper Spray – universal separating copper aerosol lubricant for various equipment elements operating under any loads (including high loads), and exposed to high temperatures and/or high humidity and/or aggressive environments. It is used to ensure easy disassembly of connections after long-term operation. Eliminates their coupling with each other under the influence of a variety of factors.
Properties:
– highest resistance to high-temperature impact;
– copper powder effectively clads the treated surfaces and gives them excellent lubricating properties;
– excellent separating action for metals and alloys in any combination;
– effectively protects against all types of corrosion;
– excellent adhesion, does not separate and does not spray even with rapid rotation of the treated surface;
– reduces noise, creaking and vibration;
– resistant to hot and salt water;
– protects against welding of contact surfaces, spikes and carbon deposits;
– universal.
Example of use:
– Repair and reduction of noise (creaking) of all types of brake systems (disc, drum, etc.);
– Lubrication and corrosion protection of propeller shaft joints, movable screw pairs, hubs, spark plug threads, screw connections, bolts, screws, etc.;
– Separating lubrication and protection against welding, burning and jamming of thermally loaded parts (connections of the exhaust system, heat exchangers, boilers, turbines and other thermal equipment).
Application: Thoroughly clean (if necessary to metal) contaminated contact surfaces from rust, carbon, oxides, scale, etc. Degrease. Shake the balloon vigorously. Apply MANNOL Copper Spray in the required amount, according to the maintenance manual. After application, clean the spray head and nozzle. You can use the cylinder as long as the cylinder does not start to blow out the clean spray gas.
Concentrated detergent with the highest washing and cleaning effect for use in foam generators (high-pressure devices) and manual foam sprayers for non-contact car washing.
Product properties:
– Forms very thick, stable active foam;
– Effectively removes all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Dissolves limescale without leaving a trace;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves an excellent glossy visual effect and a feeling of perfect cleanliness;
– Can be diluted with warm and cold water. Effective even when using hard water;
– pH-neutral.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:50 to 1:100, depending on the degree of contamination.
MANNOL Acryl Paint Black – quick-drying black matte paint for painting various surfaces of the car, made almost from any materials. It is created on the basis of synthetic acrylic resins. It is also intended for painting, decorative design and repair of small objects and household products, elements of landscape and interior design that are not subjected to mechanical loads.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Forms a coating with high performance characteristics, which has good hardness, light resistance (retains color and does not fade in the sun), hiding power, resistance to environmental influences, washing and wet cleaning with non-abrasive detergents. It does not age, can withstand temperatures within 180° C, is inert to oils, fuels, acids, alkalis, thermoplastic and water-resistant;
The coating is a homogeneous, with no craters, pores, wrinkle and foreign inclusions of the surface. The color of the coating must be within the tolerance limits set by the RAL catalog;
– Has excellent adhesive properties-forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Perfectly combined with many types of primers;
– Does not contain ozone-depleting substances and heavy metal compounds;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.
Application:
Suitable for painting MANNOL Acryl Paint Black: metal surfaces, including those previously painted with powder paints (external walls of refrigerators, washing machines, microwave ovens, etc.); any plastic surfaces; natural dense fabrics (posters, clothing items); dense mineral surfaces: concrete, brick, plastered (except for facades), plasterboard, artificial and natural stone, unglazed ceramics, crushed stone, etc., used in atmospheric conditions and indoors. It can be used for painting and decorating wood products (furniture elements, photo frames, windows, doors, etc., except for floors) and glass used indoors.
The surface to be painted must be thoroughly cleaned of grease and other contaminants, rust, scale, old peeling paint, sanded, degreased with a solvent, we recommend the MANNOL Brake Cleaner 9691 degreaser, and dried. To obtain a more durable coating, metal surfaces should be primed with an anti-corrosion primer. Cover areas of the surface that are not subject to painting with paper or paint tape.
The temperature of the surface to be painted must exceed by at least 3° C the dew point (the temperature at which moisture from the air condenses on a solid surface). Drying time of the coating at a temperature of (20 ± 2)° C-1 h. it is allowed to apply the second layer in 2-3 minutes.
To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved.
Paint should be done outdoors in calm weather, in industrial areas, warehouse premises in the presence of ventilation. Before applying, shake the balloon for 3 minutes after the ball knocks. Safety valves workability – when pressed, the valve should open, releasing the contents, when released to stop release of content (should not pass the content through the connection nipple head). Spray vertically in a thin layer from a distance of 25-30 cm at a temperature of 5° C to 30° C. Spray first horizontally, then after a short pause, vertically. Depending on the color, the number of layers is from 1 to 3. After the work is completed, clean the valve: to do this, turn the spray bottle down and press the valve for 2-5 seconds.
A single bottle can be paint up to 2 m² of even surface. It depends on the type, quality and preparation of the surface to be painted, climate factors, color and skills of the worker. If necessary, apply a special transparent varnish over the paint.
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns.
Application:
Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
Chrom Politur – polish for any chrome-plated surfaces in engineering and in everyday life (plumbing). Suitable for cleaning and polishing: stainless steels, aluminum and copper alloys, as well as alloys containing tin.
Properties:
– Effectively removes rust, stains, dirt, including old ones;
– Contains extremely fine abrasive, does not leave micro-scratches and does not damage the chrome coating;
– Effectively cleans glossy surfaces, restoring their original Shine;
– Creates a strong transparent protective film, preventing tarnishing of surfaces in the future.
Application: apply a small amount of MANNOL Chrom Politur to a thoroughly cleaned surface, rub it into the surface in a circular motion with a cloth or sanding sponge and rub it with the same circular movements. Clean the surface and finally wipe it thoroughly with a soft microfiber cloth until the surface is completely cleaned.
Acryl Paint Chrome – quick-drying matte silver paint for painting various surfaces of the car, almost any material. Created on the basis of synthetic acrylic resins. Suitable for repairing chrome parts.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Acrylic resins provide high performance characteristics of the applied coating. It does not age, retains its color and does not fade in the sun, can withstand temperatures within 180° C, is inert to acids, alkalis, water, and is thermoplastic;
– Has excellent adhesive properties – forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.
Application:
Paint should not be applied over another coating – it should be completely removed if possible. Also be sure to remove the rust. The surface must be sanded, cleaned and degreased before painting. It is acceptable to sand not the entire surface, but only the part of it that you plan to apply paint to, and there may be a difference in tone between the old and new coating. For degreasing, we recommend using the MANNOL Brake Cleaner 9691 degreaser. It is recommended to pre-Prime the surface to be painted. Shake the paint container for at least 2 minutes immediately before use. Spray the paint from a distance of 30 cm on the surface. To achieve the best result, you need to work at a temperature of at least +20° C. To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved. After use, turn the jar upside down and spray the gas for a while to clear the nozzle and avoid clogging it. If necessary, apply a special transparent varnish over the paint.
Montage Cleaner is a special high – performance cleaner for metal car parts.
Properties:
– Suitable for parts made of any metals and alloys;
– Has excellent cleaning properties;
– Applicable to brake pads and discs, clutch and transmission parts, tools, etc.;
– Removes dirt, grease, oil and other petroleum products, brake fluid, residues of burnt and evaporated technical fluids;
– Facilitates disassembly and installation of parts, saves time for disassembly, reduces the effort applied when disassembling and dismantling components and parts during car repairs;
– Suitable for cleaning vehicle bodies, oil filters, motorcycle chains and timing chains, engines, door hinges and electrical contacts, garden equipment (minitractors, motor cultivators, lawn mowers, etc.).
Application: Spray the cleaner on the dirty parts and in their joints and let it drain. After the solvents have evaporated, the parts remain clean and fat-free.
Attention: the Product may damage some paints and plastics. Before use, check the product for compatibility with them on a small invisible area of the surface.
Lock De-Icer is an ideal car lock defroster that quickly unlocks vehicles in severe frosts. Provides fast defrosting of locks, hinges and other movable joints operated at low temperatures.
Properties:
– Thanks to its high penetrating power, it quickly defrosts frozen parts of locks, restoring their functionality;
– Contains corrosion inhibitors that prevent rust formation;
– Forms a film on the surface that has a lubricating effect;
– Prevents re-freezing;
– Regular use protects the locks from freezing even at low (down to – 50 °C) temperatures.
Montage Cleaner is a special high – performance cleaner for metal car parts.
Properties:
– Suitable for parts made of any metals and alloys;
– Has excellent cleaning properties;
– Applicable to brake pads and discs, clutch and transmission parts, tools, etc.;
– Removes dirt, grease, oil and other petroleum products, brake fluid, residues of burnt and evaporated technical fluids;
– Facilitates disassembly and installation of parts, saves time for disassembly, reduces the effort applied when disassembling and dismantling components and parts during car repairs;
– Suitable for cleaning vehicle bodies, oil filters, motorcycle chains and timing chains, engines, door hinges and electrical contacts, garden equipment (minitractors, motor cultivators, lawn mowers, etc.).
Application: Spray the cleaner on the dirty parts and in their joints and let it drain. After the solvents have evaporated, the parts remain clean and fat-free.
Attention: the Product may damage some paints and plastics. Before use, check the product for compatibility with them on a small invisible area of the surface.
MANNOL Acryl Paint Silver – quick-drying silver paint for painting various surfaces of the car, made almost from any materials. It is created on the basis of synthetic acrylic resins. It is also intended for painting, decorative design and repair of small objects and household products, elements of landscape and interior design that are not subjected to mechanical loads.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Forms a coating with high performance characteristics, which has good hardness, light resistance (retains color and does not fade in the sun), hiding power, resistance to environmental influences, washing and wet cleaning with non-abrasive detergents. It does not age, can withstand temperatures within 180° C, is inert to oils, fuels, acids, alkalis, thermoplastic and water-resistant;
The coating is a homogeneous, with no craters, pores, wrinkle and foreign inclusions of the surface. The color of the coating must be within the tolerance limits set by the RAL catalog;
– Has excellent adhesive properties-forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Perfectly combined with many types of primers;
– Does not contain ozone-depleting substances and heavy metal compounds;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.
Application:
Suitable for painting MANNOL Acryl Paint Silver: metal surfaces, including those previously painted with powder paints (external walls of refrigerators, washing machines, microwave ovens, etc.); any plastic surfaces; natural dense fabrics (posters, clothing items); dense mineral surfaces: concrete, brick, plastered (except for facades), plasterboard, artificial and natural stone, unglazed ceramics, crushed stone, etc., used in atmospheric conditions and indoors. It can be used for painting and decorating wood products (furniture elements, photo frames, windows, doors, etc., except for floors) and glass used indoors.
The surface to be painted must be thoroughly cleaned of grease and other contaminants, rust, scale, old peeling paint, sanded, degreased with a solvent, we recommend the MANNOL Brake Cleaner 9691 degreaser, and dried. To obtain a more durable coating, metal surfaces should be primed with an anti-corrosion primer. Cover areas of the surface that are not subject to painting with paper or paint tape.
The temperature of the surface to be painted must exceed by at least 3° C the dew point (the temperature at which moisture from the air condenses on a solid surface). Drying time of the coating at a temperature of (20 ± 2)° C-1 h. it is allowed to apply the second layer in 2-3 minutes.
To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved.
Paint should be done outdoors in calm weather, in industrial areas, warehouse premises in the presence of ventilation. Before applying, shake the balloon for 3 minutes after the ball knocks. Safety valves workability – when pressed, the valve should open, releasing the contents, when released to stop release of content (should not pass the content through the connection nipple head). Spray vertically in a thin layer from a distance of 25-30 cm at a temperature of 5° C to 30° C. Spray first horizontally, then after a short pause, vertically. Depending on the color, the number of layers is from 1 to 3. After the work is completed, clean the valve: to do this, turn the spray bottle down and press the valve for 2-5 seconds.
A single bottle can be paint up to 2 m² of even surface. It depends on the type, quality and preparation of the surface to be painted, climate factors, color and skills of the worker. If necessary, apply a special transparent varnish over the paint.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy PolicyAccept
Reviews
There are no reviews yet.