MANNOL Tire Shine 9683
$111.00
Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.
Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system.
Acryl Paint Chrome – quick-drying matte silver paint for painting various surfaces of the car, almost any material. Created on the basis of synthetic acrylic resins. Suitable for repairing chrome parts.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Acrylic resins provide high performance characteristics of the applied coating. It does not age, retains its color and does not fade in the sun, can withstand temperatures within 180° C, is inert to acids, alkalis, water, and is thermoplastic;
– Has excellent adhesive properties – forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.
Application:
Paint should not be applied over another coating – it should be completely removed if possible. Also be sure to remove the rust. The surface must be sanded, cleaned and degreased before painting. It is acceptable to sand not the entire surface, but only the part of it that you plan to apply paint to, and there may be a difference in tone between the old and new coating. For degreasing, we recommend using the MANNOL Brake Cleaner 9691 degreaser. It is recommended to pre-Prime the surface to be painted. Shake the paint container for at least 2 minutes immediately before use. Spray the paint from a distance of 30 cm on the surface. To achieve the best result, you need to work at a temperature of at least +20° C. To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved. After use, turn the jar upside down and spray the gas for a while to clear the nozzle and avoid clogging it. If necessary, apply a special transparent varnish over the paint.
Pre-Paint Silicone Remover is a special cleaner for removing hardened and fresh silicone sealant and other silicone – containing substances from various surfaces of cars and other equipment, in construction, industry and household, such as: paint surfaces, rubber surfaces, enameled surfaces, chrome and metal surfaces, glass, plastic, concrete, ceramic tiles, wood, brick, plaster, fabric, etc.
Properties:
– Removes stains from petroleum products, solid hydrocarbons (waxy and paraffin), greasy and resinous stains and other road pollution;
– Cleans seams from any type of silicone sealant, removes both old and non-hardened silicone sealant well;
– Does not contain acetone. Neutral to paints and varnishes;
– Can be applied on solvent-sensitive surfaces including plastic, facing and laminated surfaces, fabric, without damaging them;
– Does not run off vertical surfaces when applied;
– Improves the adhesion of silicone sealant to the surface;
– Has a faint smell, easy to clean, eco-friendly, easy to use.
Application: Spray from a distance of approximately 30 cm and wipe.
Chrom Politur – polish for any chrome-plated surfaces in engineering and in everyday life (plumbing). Suitable for cleaning and polishing: stainless steels, aluminum and copper alloys, as well as alloys containing tin.
Properties:
– Effectively removes rust, stains, dirt, including old ones;
– Contains extremely fine abrasive, does not leave micro-scratches and does not damage the chrome coating;
– Effectively cleans glossy surfaces, restoring their original Shine;
– Creates a strong transparent protective film, preventing tarnishing of surfaces in the future.
Application: apply a small amount of MANNOL Chrom Politur to a thoroughly cleaned surface, rub it into the surface in a circular motion with a cloth or sanding sponge and rub it with the same circular movements. Clean the surface and finally wipe it thoroughly with a soft microfiber cloth until the surface is completely cleaned.
Tar Remover – highly effective concentrated cleaner of resinous and other hard-to-remove dirt from any surfaces of cars, motorcycles and other equipment, as well as in everyday life. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces:
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and microcracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: Spray 9666 MANNOL Tar Remover on the surface to be cleaned and leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
Universal shampoo concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and for manual contact car washing.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has a citrus smell;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber-technical products.
Application:
For non-contact washing: to prepare the working solution, dilute the concentrate with water in a ratio from (1: 20 to 1: 50), depending on the degree of contamination.
For manual washing: First remove large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20) depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
Tar Remover is a highly effective concentrated cleaner of resinous and other hard – to-remove dirt from all surfaces of cars, motorcycles and other equipment, as well as in everyday life in the form of an aerosol. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces;
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and micro cracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: spray 9668 MANNOL Tar Remover on the surface to be cleaned and Leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
Liquid Soap Concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and cleaning of walls and floors of garages and other premises.
Product properties:
– Forms rich active foam;
– Effectively removes all types of stains and dirt: oil, fat, soot, etc. due to its excellent splitting properties;
– Suitable for washing glass and polycarbonate panels;
– Easily washed off with water without leaving streaks and smudges;
– Effective even when using hard water;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces and plastics.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:20 to 1:50, depending on the degree of contamination.
Highly foaming shampoo concentrate with the highest washing and cleaning action for manual contact car wash.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dusty fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has the smell of sea breeze;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber products.
Application: Remove in advance large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20, depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
Tire Cleaner – a special foam cleaner for quick, easy and gentle cleaning and further maintaining the cleanliness of tires and giving them the best appearance in just one operation. It is suitable for any type of tires of any equipment and all types of rubber – without having a negative chemical effect on them.
Properties:
– Effectively dissolves and removes residues of petroleum products, including bitumen, as well as grease, dirt, salt, wear products of the brake system and asphalt, etc.;
– Restores the original properties of the rubber and the black color of the tires, gives them a gloss and prevents aging of the rubber, thereby increasing their service life;
– Further protects tires from the negative effects of the environment: moisture, dirt, petroleum products from the road, de-icing road reagents (salt) in winter, aggressive gases, etc.;
Application:
Shake the balloon well and spray on the tire from about 10-15 cm. Leave on for 3-5 minutes, then wipe with a damp sponge or rinse with water. After completing the work, check the brakes at a low speed as the vehicle may have got on the brake pads or discs. Clean them if necessary.
Concentrated detergent with the highest cleaning effect for use in foam generators (high-pressure devices) for non-contact washing of the engine and similar units, as well as other metal products. It does not contain organic solvents.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt from metal surfaces: dust, fuel, oil, fat, soot, etc. due to its excellent splitting properties;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Does not contain chlorine compounds;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: to prepare the working solution, the concentrate must be diluted with water in a ratio of 1:10.
Concentrated detergent with the highest washing and cleaning effect for use in foam generators (high-pressure devices) and manual foam sprayers for non-contact car washing.
Product properties:
– Forms very thick, stable active foam;
– Effectively removes all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Dissolves limescale without leaving a trace;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves an excellent glossy visual effect and a feeling of perfect cleanliness;
– Can be diluted with warm and cold water. Effective even when using hard water;
– pH-neutral.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:50 to 1:100, depending on the degree of contamination.
Lock De-Icer is an ideal car lock defroster that quickly unlocks vehicles in severe frosts. Provides fast defrosting of locks, hinges and other movable joints operated at low temperatures.
Properties:
– Thanks to its high penetrating power, it quickly defrosts frozen parts of locks, restoring their functionality;
– Contains corrosion inhibitors that prevent rust formation;
– Forms a film on the surface that has a lubricating effect;
– Prevents re-freezing;
– Regular use protects the locks from freezing even at low (down to – 50 °C) temperatures.
