MANNOL Tire Shine 9683
$111.00
Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.
Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system.
Felgen Cleaner – a special intensive cleaner for fast, easy and gentle cleaning and further maintenance of wheels and rims of any design of cars and other equipment. Suitable for steel and light-alloy wheels with any coating (paint, powder, etc.).
Properties:
– Excellent cleaning properties and good wettability: removes the heaviest dirt: oil stains (oils, fuels, etc.), bitumen particles and other road dirt, brake pad wear products, etc.;
– Does not have a chemical effect on rubber and plastic surfaces;
– Supports disk Shine. With regular use, it will provide them with an excellent appearance and a long service life.
Application:
Shake well before applying and spray Felgen Cleaner evenly on dirty discs. Depending on the degree of contamination, leave it to act for 5-7 minutes, but do not let it dry. If there is persistent dirt, use a sponge or brush during the cleaning process. Thoroughly wash dirt and detergent residues with a strong stream of water. It is not recommended to use on heated disks or in direct sunlight.
Tar Remover is a highly effective concentrated cleaner of resinous and other hard – to-remove dirt from all surfaces of cars, motorcycles and other equipment, as well as in everyday life in the form of an aerosol. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces;
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and micro cracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: spray 9668 MANNOL Tar Remover on the surface to be cleaned and Leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
Lock De-Icer is an ideal car lock defroster that quickly unlocks vehicles in severe frosts. Provides fast defrosting of locks, hinges and other movable joints operated at low temperatures.
Properties:
– Thanks to its high penetrating power, it quickly defrosts frozen parts of locks, restoring their functionality;
– Contains corrosion inhibitors that prevent rust formation;
– Forms a film on the surface that has a lubricating effect;
– Prevents re-freezing;
– Regular use protects the locks from freezing even at low (down to – 50 °C) temperatures.
Auto Wash & Wax ASW-super shampoo concentrate with the highest washing and cleaning action for manual contact washing of cars and other vehicles with the properties of polish.
Properties:
– A special mixture of active substances-foaming agents creates very active foam and thoroughly cleans the car;
– Active detergents effectively remove all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to their excellent splitting properties;
– Due to the contained wax components, it forms a strong and transparent film that protects the body after washing and gives it an excellent long-lasting shine;
– Easily washed off with water without leaving stains, streaks, smudges and other traces;
– It is recommended to dissolve in hot water.
Compatibility: safe for paint and varnish surfaces, plastics and rubber-technical products.
Application:
In advance remove large dirt with a strong stream of water.
To prepare the working solution, the concentrate must be diluted with hot water in a ratio from 1:100 (100 ml per 10 liters of water) to 1:20, depending on the degree of soiling. Apply the solution with a sponge to the surface of the car body. Leave for 5-10 minutes to act. RUB the car body with calm movements without pressure. Wash the surface thoroughly with clean water. the pH of the solution in a ratio of 1: 100 (20 °C) is 7-8.
Highly foaming shampoo concentrate with the highest washing and cleaning action for manual contact car wash.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dusty fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has the smell of sea breeze;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber products.
Application: Remove in advance large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20, depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
Speed Wax – highly effective and fast-acting polish for paintwork of car bodies and other equipment based on natural Carnauba wax to maintain them in perfect condition. Applicable to plastic and rubber parts of the car body.
Properties:
– Gives the treated paint coatings a bright glossy shine and rich color for a long time, masks scratches and damage to the coating;
– When liquid gets on the paint surface, it forms a “water-beading effect” – the effect of water beads, when the liquid remains on the surface in the form of small drops like scattered beads. This means that water flows freely from the paintwork, reducing straps and streaks that could form on its surface. This also means that any dirt and road dust will also roll off it, reducing the need for hard mechanical cleaning during the washing process, which in turn minimizes the appearance of micro-scratches and damage. The end result is a slippery paint surface that is much easier to clean and dry;
– Seals damage to the paintwork, penetrating even microscopic scratches and preventing corrosion, and further contributes to better adhesion to the paintwork of hard wax, nanoceramics, etc.;
– Protects the paintwork during frequent car wash;
– Has a long-lasting protective effect, preventing paint surfaces from the harmful effects of the environment. Restores protective properties of coatings;
– Suitable for any type of paintwork;
– Applicable to plastic and rubber parts of the car body;
– Can be applied to wet and dry surfaces;
– Suitable for polishing machines.
Application: before applying 9977 MANNOL Speed Wax, shake it hard several times, then apply it to a soft cloth, polishing cloth or sponge, then apply it with a small pressure in a circular motion, even and thin layer on the cleaned and washed paint surface, and then also – in a circular motion – polish. It is best to polish with clean microfiber.
Concentrated detergent with the highest cleaning effect for use in foam generators (high-pressure devices) for non-contact washing of the engine and similar units, as well as other metal products. It does not contain organic solvents.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt from metal surfaces: dust, fuel, oil, fat, soot, etc. due to its excellent splitting properties;
– Does not cause corrosion of ferrous metals and oxidation of non-ferrous metals;
– Easily washed off with water;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Does not contain chlorine compounds;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: safe for all types of metal surfaces, paint surfaces, plastics and rubber-technical products.
Application: to prepare the working solution, the concentrate must be diluted with water in a ratio of 1:10.
Pre-Paint Silicone Remover is a special cleaner for removing hardened and fresh silicone sealant and other silicone – containing substances from various surfaces of cars and other equipment, in construction, industry and household, such as: paint surfaces, rubber surfaces, enameled surfaces, chrome and metal surfaces, glass, plastic, concrete, ceramic tiles, wood, brick, plaster, fabric, etc.
Properties:
– Removes stains from petroleum products, solid hydrocarbons (waxy and paraffin), greasy and resinous stains and other road pollution;
– Cleans seams from any type of silicone sealant, removes both old and non-hardened silicone sealant well;
– Does not contain acetone. Neutral to paints and varnishes;
– Can be applied on solvent-sensitive surfaces including plastic, facing and laminated surfaces, fabric, without damaging them;
– Does not run off vertical surfaces when applied;
– Improves the adhesion of silicone sealant to the surface;
– Has a faint smell, easy to clean, eco-friendly, easy to use.
Application: Spray from a distance of approximately 30 cm and wipe.
Tar Remover – highly effective concentrated cleaner of resinous and other hard-to-remove dirt from any surfaces of cars, motorcycles and other equipment, as well as in everyday life. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces:
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and microcracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: Spray 9666 MANNOL Tar Remover on the surface to be cleaned and leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns.
Application:
Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
Silicone Spray is a universal protective water – resistant, insulating and antifriction agent based on organosilicon compounds. It is intended, among other things, for effective lubrication of rubbing surfaces made of dissimilar materials (for example, metal and plastic) to eliminate jamming, creaking and cracking that occur during vehicle operation. It is recommended for use where the use of lubricants containing petroleum products and fats is undesirable.
Properties:
– Forms a solid transparent polymer layer of silicone molecules on the treated surface, which gives the surface excellent water-, dust-repellent and antistatic properties, in addition, it reduces friction, prevents creaking, freezing and corrosion;
– Can be used both inside and outside the car, on surfaces made of plastic, rubber, metal, wood, etc.
– Protects surfaces and restores their Shine, protects against UV exposure;
– Restores the elasticity of rubber and plastic parts and protects them from drying and cracking;
– Does not contain mineral oils and fats.
– Recommended for lubrication of rollers and guides of seat belts and hatches, for protection against freezing of rubber seals of doors, hoods, trunk lids, etc . protects against aging and embrittlement of bumpers, radiator grilles, spoilers, moldings, vinyl covers, etc. protects against moisture and water electrical equipment and contacts.
Application: clean the surface to be treated before use. Shake the balloon well before use. Spray evenly on the surface in the required amount from a distance of 10-15 cm. If necessary, wipe the surface with a dry cloth. Do not use on objects that have contact with food. You can apply the product on a dry sponge or cloth and wipe the surface thoroughly. Avoid applying to glass, varnished or fabric surfaces. Do not use on the steering wheel, pedals, or door handles.
Silicone Spray is a universal protective water – resistant, insulating and antifriction agent based on organosilicon compounds. It is intended, among other things, for effective lubrication of rubbing surfaces made of dissimilar materials (for example, metal and plastic) to eliminate jamming, creaking and cracking that occur during vehicle operation. It is recommended for use where the use of lubricants containing petroleum products and fats is undesirable.
Properties:
– Forms a solid transparent polymer layer of silicone molecules on the treated surface, which gives the surface excellent water-, dust-repellent and antistatic properties, in addition, it reduces friction, prevents creaking, freezing and corrosion;
– Can be used both inside and outside the car, on surfaces made of plastic, rubber, metal, wood, etc.
– Protects surfaces and restores their Shine, protects against UV exposure;
– Restores the elasticity of rubber and plastic parts and protects them from drying and cracking;
– Does not contain mineral oils and fats.
– Recommended for lubrication of rollers and guides of seat belts and hatches, for protection against freezing of rubber seals of doors, hoods, trunk lids, etc . protects against aging and embrittlement of bumpers, radiator grilles, spoilers, moldings, vinyl covers, etc. protects against moisture and water electrical equipment and contacts.
Application: clean the surface to be treated before use. Shake the balloon well before use. Spray evenly on the surface in the required amount from a distance of 10-15 cm. If necessary, wipe the surface with a dry cloth. Do not use on objects that have contact with food. You can apply the product on a dry sponge or cloth and wipe the surface thoroughly. Avoid applying to glass, varnished or fabric surfaces. Do not use on the steering wheel, pedals, or door handles.
