Size | 5 Liter, 10 Liter, 20 Liter, 60 Liter, 208 Liter, 1000 Liter |
---|
MANNOL TS-2 SHPD 20W-50 7102
$111.00
Code : MN7102
Specifications : SAE 20W-50 / 20W50 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Special multi-season, highly alloyed mineral engine oil with the addition of hydrosynthetics for modern, heavy duty and high-speed diesel engines with and without turbocharging, operating in extremely difficult conditions (including, at high ambient temperatures) and for engines with high mileage. Designed specifically to protect equipment and benefit most out of it under extreme loads.
Product properties:
– The highly viscous mineral-synthetic base of the highest quality provides good anti-friction and anti-wear properties, significantly extends the service life of equipment compared to counterpart oils in the most extreme operating modes;
– Compared with counterparts, has higher thermal oxidation stability which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– Unique dispersant additives effectively support soot particles in suspension;
– Perfectly compatible with all types of gasketing, and has a low tendency to leakage even when worn, thanks to the high viscosity base;
– Contains components that prevent oxidation and deposition of contaminants on the pistons and O-rings; completely removed from the cylinder walls by oil control rings, which, in combination with low evaporation, significantly reduces oil waste due to scaling even on worn engines and allows it to be used in engines with long life and ordinary oils;
– The use of thickening additives of the latest generation not prone to degradation allows maintaining the required viscosity throughout the entire period between replacements;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CH-4 or lower is required. Highly recommended for heavy duty tracked vehicles.
Can be used in gasoline engines where API SL or lower performance is required.
Based on 0 reviews
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
|
|
0% |
Code : MN7101
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Multigrade mineral engine oil with the addition of hydrosynthetic components for modern heavy-duty and high-speed turbocharged and non-turbocharged diesel engines operating under severe conditions. Especially designed to protect your equipment and get the most out of it, regardless of its operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality ensure good anti-friction and anti-wear properties, which significantly extend the service life of the vehicle compared to analogue oils in all, even the most extreme, operating conditions, while ensuring considerable fuel savings;
– It has improved thermal-oxidative stability, which in combination with excellent detergent and dispersant properties (TBN >10) effectively reduces carbon and lacquer formation, prevents formation of all kinds of deposits and keeps engine separate parts clean throughout the whole interval between oil replacements;
– The unique formulation provides the oil with resistance to ageing and, by reducing evaporation, reduces the operating consumption, enabling it to be used in engines with extended oil change intervals (Long Life) and conventional engines;
– It has good low-temperature properties, including a low pour point, which ensures good oil pumpability and turnability of engine components at low temperatures, easy cold start and reduced starting wear;
– Effectively protects engine separate parts against all types of corrosion;
– Can be used when operating on fuels with high sulphur content.
It is intended for all types of highly loaded diesel engines of highway (long haul trucks, buses etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers meeting Euro I, II, III, IV requirements, where CH-4 level of performance properties or lower is required.
Can be used in petrol engines where the performance level API SL or lower is required.
Code : MN7512
Specifications : SAE 10W-30 / 10W30 / API SN / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / ISUZU / KIA
Product Details
Hydro-synthetic universal motor oil for all types of gasoline engines. Designed to meet VW and DAIMLER requirements.
Product properties:
– The hydrosynthetic base ensures efficient operation of the engine in all operating modes: during cold start, in urban mode and in highway mode;
– Due to its good washing and dispersing properties and high thermal oxidative stability, it effectively fights against all types of deposits (carbon deposits, varnishes) and keeps engine parts clean throughout the entire interval between replacements;
– Contains an effective set of antioxidants due to which it effectively resists aging;
– Saves fuel due to the low viscosity base base;
– The hydro-synthetic base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– Applicable for diesel engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW vehicles that impose additional requirements for engine oils (according to the above specifications), when API SN or lower performance is required, as well as ACEA A3/B4.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7915
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : MB 229.5 / MB 229.3 / MB 226.5 / JASO MA2 / VOLKSWAGEN 502.00 / VOLKSWAGEN 505.00 / PORSCHE A40 / RENAULT RN0710 / RENAULT RN0700 / BMW LL-01 / BMW LL-98 / PSA B71 2296 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative universal ester-containing premium motor oil for modern gasoline and diesel engines with and without turbocharging, including “old” brands and high mileage. Designed based on the requirements of European producers.
Product properties:
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Applicable to 4T wet clutch motorcycle engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in the engines of Daimler, VW, Opel, GM, Renault vehicles imposing additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7108
Specifications : SAE 5W-30 / 5W30 / ACEA E4 / ACEA E7
Recommendation / OEM Approval : VOLVO VDS-3 / MAN M 3277 / MAN M 3377 / MACK EO-N / RENAULT RLD-2 / MB Approval 228.5 / API CI-4 / MTU Type 3 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215
Product Details
Energy-saving synthetic (PAO-based) motor oil for heavy duty and high-speed diesel engines of the latest generation with and without turbocharging, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Daimler concern centres and has their written approvals.
Product properties:
– The unique low-viscosity synthetic PAO-containing base of the highest quality, with ideal viscosity in the required temperature range, combined with an innovative additive package, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extends the life of the equipment in all, even the most complicated, modes works in a fairly wide range of ambient temperatures and offers significant fuel savings;
– The synthetic PAO-containing base and the innovative additive package provide increased thermal oxidative stability and unsurpassed washing and dispersing properties to the oil (TBN > 12.5), effectively reducing the formation of scaling and varnish, preventing deposits of all kinds and maintaining perfect engine parts, especially the cylinder-piston group, throughout the entire service period between replacements;
– A unique PAO-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the PAO-containing base, the lower viscosity has perfect low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -35ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
For all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI requirements where the performance level of ACEA E4/E7 is mandatory.
Code : MN7112
Specifications : SAE 10W-30 / 10W30 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : MB 228.1 / MB 228.3 / MACK EO-M Plus / MACK EO-N / MAN M 3275-1 / MTU Type 2 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / CATERPILLAR ECF-1a / CATERPILLAR ECF-2 / RENAULT RLD-2 / VOLVO VDS-3 / DETROIT DIESEL 93K215
Product Details
All-weather semi-synthetic (HC synthesis) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality and low viscosity provide excellent anti-friction, anti-wear and extreme pressure characteristics, which significantly extends the service life of the equipment in any, even the most extreme, operating conditions in a wide range of ambient temperatures, and provides significant fuel savings;
– The synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique hydrosynthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 30,000 km and conventional motors;
– Due to the hydrosynthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion and gaskets – against acid etching;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from Russian, European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
Code : MN7402
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / MB 226.9 / MAN 271 / ALLISON C4
Product Details
Highly refined economy-class mineral engine oil for highly accelerated diesel engines with and without a turbocharger. Suits high mileage engines operating in various operating conditions.
Product properties:
– High viscosity index and excellent compatibility with sealing materials help reduce the chance of the leakage and maintain the necessary oil pressure even for high mileage engines ;
– Low volatility reduces oil consumption through burning;
– A thoroughly balanced additive package ensures an efficient service of an engine in all modes of operation: cold start, increased load (off-road and uphill driving, towing, driving with maximum load) and in high-temperature ambient conditions;
– Long-lasting oil film effectively protects from wear, reduces friction and prevents corrosion;
– Ensures reliable lubrication of all engine components under all operating conditions;
– Reduces the soot and carbon formation;
– Natural antioxidants effectively counter ageing and maintain oil’s properties when using variable fuel quality (with sulphur content up to 500 ppm) due to high total base number (TBN).
Intended for the maximum protection of diesel engines of a wide car fleet (passenger cars, light SUVs, minibuses and light trucks) from Russian, European and other manufacturers.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7901
Specifications : SAE 0W-40 / 0W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : ACEA A3/B4 / BMW LL-04 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / MB 229.5 / MB 229.3 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / GM LL-A-025 / GM LL-B-025 / FIAT 9.55535-M2 / FORD WSS-M2C937-A / CHRYSLER MS-10725 / CHRYSLER MS-12633 / Additional_Recommended_Applications for AMG
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines. Designed in accordance with the requirements of German automakers.
Product properties:
– A unique bi-synthetic (PAO + esters) base with an expanded range of viscous and temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as at increased load (when driving on the road, uphill, with a trailer, maximum load) and at high ambient temperatures:
– Due to its excellent washing-dispersing properties and the highest thermal-oxidative stability, it effectively fights against all types of deposits and keeps engine parts and turbochargers clean throughout the entire interval between replacements;
– Low viscosity bi-synthetic base (PAO + esters) and a highly effective additive package provide reliable cold start in the most severe conditions, which significantly reduces engine starting wear;
– Due to the exceptional strength of the oil film created by the ester components, it has excellent anti-seize, anti-wear and anti-friction properties, which allows to save fuel and, combined with excellent pumpability, significantly increase engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel.
Designed for gasoline and diesel engines (with and without turbocharging) a wide fleet of cars (cars, light SUVs, minibuses and light trucks of European and other manufacturers), where the performance level of API SN / CH-4 and lower, as well as ACEA A3/B4.
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7105
Specifications : SAE 10W-40 / 10W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather semi-synthetic (esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality semi-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30ºC) and reduced startup wear;
– Compatible with exhaust gas recirculation (EGR) systems. Reduces soot formation;
– Effectively protects engine parts from all types of corrosion;
– lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
Code : MN7504
Specifications : SAE 10W-40 / 10W40 / API CH-4/SL / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 502 00 / VOLKSWAGEN 501 01 / VOLKSWAGEN 500 00 / MB 229.3 / MB 229.1 / PSA B71 2294 / RENAULT RN0700 / RENAULT RN0710
Product Details
Innovative universal ester-containing motor oil on a hydrosynthetic basis for diesel engines, both new and “old” brands and with high mileage. Specially designed for turbocharged engines.
Product properties:
– Ester technology and a hydrosynthetic base with an extended range of viscous-temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures:
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Hydrosynthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components in combination with a unique modern additive package provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with good pumpability, significantly increases the engine’s service life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is possible to use in gasoline engines.
Designed for diesel engines in a wide fleet of cars (cars, light SUVs, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW vehicles with additional requirements for engine oils (according to the above specifications).
Code : MN7103
Specifications : SAE 10W-40 / 10W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
All-year-round mineral engine oil for modern heavy-duty and high-speed diesel engines with and without turbocharging operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction and anti-wear properties which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– A unique formulation provides oil resistance to ageing, meanwhile, by reducing evaporation it reduces operating consumption, which enables it to be used in engines with long life intervals up to 45.000 km and conventional engines;
– Due to the base with optimal viscosity, it has excellent low-temperature properties, a low pour point, along with good oil pumpability and turnability of engine components at low temperatures, easy “cold starts” (down to -30 °C) and reduced startup wear;
Designed for all types of heavy-duty diesel engines (long-distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CH-4 or lower is required.
Can be used in petrol engines where API SL or lower performance is required.
Code : MN7115
Specifications : SAE 20W-50 / 20W50 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3 / MAN M 3275-1
Product Details
Special multi-season, highly alloyed mineral engine oil with the addition of hydrosynthetics for modern, heavy duty and high-speed diesel engines with and without turbocharging, operating in extremely difficult conditions (including, at high ambient temperatures) and for engines with high mileage. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Highly viscous mineral-synthetic base with the utmost quality that meets the requirements of GLOBAL DHD-1 provides excellent anti-friction and anti-wear properties, significantly extending the life of the equipment compared to counterpart oils under the most extreme operating modes;
– Distinguished by the low sulphate ash content;
– Compared with counterparts, has higher thermal oxidation stability which, in combination with excellent detergent-dispersant properties (TBN> 10) effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts very clean throughout the service between replacements;
– Unique dispersant additives effectively support soot particles in suspension;
– Perfectly compatible with all types of gasketing, and has a low tendency to leakage even when worn, thanks to the high viscosity base;
– Contains components that prevent oxidation and deposition of contaminants on the pistons and O-rings; completely removed from the cylinder walls by oil control rings, which, in combination with low evaporation, significantly reduces oil waste due to scaling even on worn engines and allows it to be used in engines with long life and ordinary oils;
– The use of thickening additives of the latest generation not prone to degradation allows maintaining the required viscosity throughout the entire period between replacements;
– Effectively protects engine parts from all types of corrosion;
– Can be used in combination with few all with higher sulphur content;
– Suitable for engines equipped with EGR recirculation system.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required. Highly recommended for heavy duty tracked vehicles.
Can be used in gasoline engines where API SL or lower performance is required.
Code : MN7511
Specifications : SAE 5W-30 / 5W30 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / VOLKSWAGEN 503 01 / VOLKSWAGEN 501 01 / MB 229.3 / MB 229.5 / BMW LL-98 / RENAULT RN0710 / RENAULT RN0700 / FORD WSS-M2C913-B
Product Details
Innovative universal premium ester-containing engine oil for modern gasoline and diesel engines with and without turbocharging. Designed based on the requirements of European car manufacturers.
Product properties:
– Ester technology and a synthetic base with an optimal range of viscous-temperature properties ensures efficient operation of the engine in all operating modes (during cold start, in urban mode, in track mode) and in conditions of frequent temperature change patterns;
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Saves fuel due to low HTHS viscosity and optimal anti-friction properties;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements.
Designed for gasoline and diesel engines of a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler and VW vehicles with additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Reviews
There are no reviews yet.