-
$111.00
Modern multifunctional additive in engine oil – a viscosity stabilizer designed to restore oil pressure and reduce its consumption in engines with high mileage.
Product properties:
– A special modifier increases the oil viscosity index, which prevents oil from entering the combustion chamber, which in turn reduces soot formation and eliminates exhaust gas smoke;
– Anti-wear components minimize wear on engines with any mileage and extend their service life;
– Improves the stability and strength of the oil film on the rubbing parts of the engine, which facilitates cold start and reduces starting wear;
– Especially effective in severe operating conditions and when oil is diluted with fuel;
– Suitable for petrol and diesel engines and all types of engine oils (synthetic, mineral, etc.)Color: yellow-brown.
Application: Add to fresh engine oil at each oil change after the engine reaches operating temperature.
The contents of one container are sufficient for lubrication systems up to 5 liters of oil. -
$111.00
Motor Flush is a Special cleaner for removing sediments, dirt, sludge and wear products of engine parts, including the most inaccessible elements of the oil system.
Product properties:
– Cleans the oil system and filter nets of oil pumps. During the washing process, it provides reliable lubrication, preventing wear of engine parts. Due to the unique composition of detergent-dispersing additives, it guarantees highly effective and safe removal of carbon deposits, including from the bottom of the piston;
– Removes both oil-soluble and non-oil-soluble contaminants;
– Cleaning is gentle for all parts and components of the engine and does not harm them;
– Neutral to the seals used;
– It is miscible with all types of engine oils (mineral and synthetic, etc.) and can be used for flushing any gasoline and diesel engines with or without turbocharging, with or without exhaust gas cleaning systems;
– Completely removed from the system along with old oil.Application: at the operating temperature of the engine, add the contents of the container to the used engine oil before replacing it. After 10 minutes of engine idling, drain the used oil, replace the filter and fill in the new oil (you CAN’t DRIVE the CAR UNTIL THE new OIL is FILLED in!). The contents of the 0.35 l can are sufficient for flushing engines with an oil system volume of up to 6 l. Not suitable for motorcycles with wet clutches.
-
$111.00
Motor Kaltreiniger – highly effective detergent for cleaning and maintenance of the engine compartment of the car. Quickly, efficiently and carefully removes any contamination of the engine compartment: oil, residues of evaporated and burnt technical fluids, road dirt and dust, road reagents, etc. Softens and dissolves the most difficult to remove and old dirt. A clean engine is less likely to overheat.
– Has an increased solvent capacity and active cleaning properties;
– Active foam stays on vertical surfaces for a long time, providing excellent cleaning of complex dirt in all dimensions;
– Neutral in relation to plastic, rubber, paint coatings, chrome, nickel, zinc, etc., as well as to the surfaces of ferrous and non-ferrous (aluminum, bronze, brass, etc.) metals and alloys;
– Further prevents oxidation, cracking and loss of properties of rubber and plastic parts of the engine under the aggressive influence of pollution and the environment, prevents oxidation of electrical connections, reduces the risk of short circuits, prevents fire of electrical wiring;
– Can be used for cleaning various aggregates of cars, motorcycles, trucks, tractors and other agricultural and construction equipment, as well as water equipment: chassis, filters, pumps, tools, auto and motorcycle drive chains of all types, garden equipment and tools;
– It is recommended to use at the end of the “dirty” season, before and after engine, suspension or transmission repairs, as well as during pre-sale preparation of the car;
– Can be used for cleaning concrete floors from oil.Application: Spray on the parts to be cleaned from a distance of 20-30 cm and leave to act for 10-20 minutes, depending on the degree of contamination. Then rinse thoroughly with a strong stream of water.
-
$111.00
Innovative multifunctional engine protectant by stabilising the pressure in the lubrication system – an additive for engine oils based on synthetic esters (Group V oils). It is a complex product: a viscosity stabiliser protecting the oil from liquefaction, a sealant of the engine lubrication system and a friction modifier. It is suitable for all types of four-stroke engines – diesel and petrol engines and all types of oils – synthetic, semi-synthetic, mineral, including those containing esters.
Properties:
– Replaces the loss of kinematic viscosity (at 100 °C) during operation (especially with frequent cold starts) without reducing the low-temperature properties;
– Increases the viscosity index;
– Reduces cylinder compression loss by improving the dynamic seal between the piston and cylinder, thereby reducing operating consumption by preventing oil from entering the combustion chamber;
– Eliminates micro leaks caused by mechanical wear of engine separate parts by adding modifiers causing blockage of these leaks;
– Penetrates into worn seals and rubber sealings, restores their former volume and elasticity, preventing oil leakage through them;
– Contains API SN/CG-4 additive package;
– Increases oil film thickness;
– Reduces oil volatility, which also reduces operational consumption and extends the oil’s service life;
– Increases the thermal-oxidative stability, which increases its resistance to ageing and degradation so that oil change intervals can be extended;
– Improves low-temperature properties, which greatly facilitates cold starts and reduces engine starting wear;
– Improves detergent and dispersant properties, prevents deposits of lacquers, resins and sludge, which increases engine and oil service life.The ester molecules found in the additive are magnetised to metal surfaces due to their distinct polarity and create a dense and very strong oil film, which has:
– the highest load-carrying capacity which allows the engine to work under increased loads without negative consequences;
– unsurpassed antiwear and antifriction properties which significantly increases engine durability and saves fuel;
– anticorrosive and antioxidant properties.Compatible with all materials.
Compatible with all types of exhaust gas aftertreatment systems.
Contains fluorescent dye for leak detection.Application: Add to tank at a ratio of 100 ml per 1 L of oil.
Recommended for regular use. -
$111.00
Motor Starter – a special aerosol product designed to facilitate the start of diesel (including with pump injectors and common rail system) and gasoline (injection and carburetor) both two-and four – stroke engines of passenger cars, trucks, construction and agricultural machinery, motorcycles, mopeds, ATVs, snowmobiles, chainsaws, gas tools, garden equipment, as well as marine and boat engines of all types, compressor engines, etc. generators. Provides fast and reliable start-up in winter, even in extreme cold, high humidity, wet spark plugs, irregular fuel supply and a dead battery. It is a combination of highly flammable active substances, including esters.
Properties:
– Contains special lubricating additives that exclude wear and micro-pressure of the cylinder-piston group when starting the engine;
– Protects the engine from corrosion;
– Extends the life of the engine and battery when used regularly;
– Improves the ignition of fuel;
– Has an increased calorific value and provides uniform and complete combustion of the fuel-air mixture;
– Economically.Application:
Shake the balloon. Spray the product directly into the air filter or intake duct for 5-7 seconds, and then start the engine immediately. For petrol engines, press the gas pedal slightly. For diesel engines, press the gas pedal against failure. Do not spray on the spark plugs and parts of the heating system.Note:
Since the product contains flammable substances, it is not allowed to smoke when using it, and it can not be used near an open fire or other sources of ignition. -
$111.00
Code : MN8115
Specifications : SAE 75W / API GL-4
Recommendation / OEM Approval : TOYOTA LV / NISSAN LV MTF-1 / MB 235.71 / VOLKSWAGEN G 052 798 / VOLKSWAGEN G 052 727 / VOLKSWAGEN G 052 749 / VOLKSWAGEN TL 521 71 (G 052 171 A1) / VOLKSWAGEN TL 521 71 (G 052 171 A2) / VOLKSWAGEN TL 521 78 (G 052 178 A2) / VOLKSWAGEN TL 525 12 (G 052 512 A2) / VOLKSWAGEN TL 726 (G 052 726 A2) / VOLKSWAGEN TL 726 (G 055 726 A2) / VOLKSWAGEN TL 726 (G 060 726 A2) / VOLKSWAGEN TL 726 (G 070 726 A2) / BMW 83 220 396 706 / BMW 83 22 7 533 818 / BMW 2300 7533 818 / BMW MTF LT-3 / BMW MTF LT-2 / FORD WSS-M2C200-D2 / PSA 9730 A8 / TOYOTA 08885-81081 / VOLVO 1161838 / VOLVO 1161839 / Others JWS 2271
Product Details
Universal energy-saving all-season transmission fully synthetic oil of the latest generation specially developed for use in robotic and manual gearboxes of TOYOTA and FORD cars (Attention! Not for all manual transmissions). Applicable for transfer cases and differentials. Developed based on the requirements of the TOYOTA group.
Product properties:
– A unique synthetic base of the highest quality, with ideal viscosity in a wide temperature range, combined with the latest generation additive package, provide unsurpassed antifriction properties, which provides significant fuel economy and very smooth gear shifting;
– Due to its unique composition, it provides excellent anti-wear and extreme pressure properties, which significantly extends the life of the equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures. It has increased resistance of the oil film to high pressures and increased shear stability;
– Provides excellent low-temperature properties, which ensures easy start-up, reliable lubrication, as well as smooth, easy and accurate gear shifting at any ambient temperature (up to -45 °C) and under any operating conditions;
– Effectively protects against varnish and clogging of the synchronizer ring;
– Effectively resists aeration, foaming, has excellent cooling properties. Has low evaporation loss;
– It has increased thermal, thermo-oxidative and chemical stability and resistance to high-temperature thermal degradation over the entire life cycle. This allows to reduce the formation of sludge, varnish, soot and other carbon deposits, significantly increase the oil change interval and ensure the durability of the transmission parts, which reduces maintenance costs;
– Due to the addition of special inhibitors, it effectively protects metal parts from ferrous and non-ferrous alloys from corrosion both during operation and inoperative;
– Provides excellent compatibility with seal materials, prevents them from swelling, hardening and shrinkage, which reduces the cost of spare parts and prevents leakage;
– Reduces noise.Recommended for use in manual transmission of TOYOTA, BMW, Volkswagen, VOLVO, FORD cars, etc. in accordance with the above requirements of car manufacturers.
Follow the manufacturer’s instructions in the instruction manual. -
$111.00
Code : MN8104
Specifications : SAE 75W-80 / 75W80 /API GL-4
Recommendation / OEM Approval : VOLKSWAGEN G 009 317 / VOLKSWAGEN G 052 171 / VOLKSWAGEN G 052 178 / VOLKSWAGEN G 052 512 / VOLKSWAGEN G 052 532 / VOLKSWAGEN G 052 527 / VOLKSWAGEN G 052 726 / VOLKSWAGEN G 052 798 / VOLKSWAGEN G 055 726 / BMW MTF LT-1 / BMW MTF LT-2 / BMW MTF LT-3 / BMW MTF LT-4 / FORD WSS-M2C200-D2 / MB 235.10 / MITSUBISHI MZ312644 3005401 / NISSAN 999MP-MTF20P KE91699932R / PEUGEOT 9730A2/9730A8 / PSA B71 2330 / TOYOTA JWS 227
Product Details
A latest-generation energy-conserving synthetic gear oil for manual transmissions. It is recommended for use in all types of 5- and 6-speed synchronized manual transmissions, including transmissions with an incorporated differential of front wheel drive vehicles, transfer cases and main gears, in which the application of the standard GL-4 is prescribed. It was developed on the basis of the requirements set by the BMW group.
Product properties:
– The low-viscosity synthetic base of the highest quality with ideal viscosity in the required range of temperatures in combination with a latest-generation additive package ensures superior antifriction properties thus ensuring a significant fuel economy and the smoothness of the transmission shift;
– Due to its unique composition, it ensures excellent antiwear and anti-scuffing properties that significantly extend the expected life of the technical equipment in all, even the most extreme, modes of operation in a wide range of ambient temperatures. The oil film has an increased resistance to elevated pressure;
– The synthetic base ensures superior low-temperature properties that ensure an easy starting, reliable lubrication, as well as an easy and precise transmission shift at the lowest (up to -30 °C) ambient temperatures;
– Due to the synthetic base, it has a high thermal-oxidative stability that allows increasing the time between the oil changes and reducing equipment maintenance costs;
– It protects metal parts from corrosion;
– It is compatible with sealing materials, prevents them from swelling, hardening and shrinking thus allowing the reduction of costs for spare parts;
– It has a reduced foam and sludge formation rate, reduces noise, it does not breakdown and preserves the structure homogeneity throughout the entire service life.It is recommended for BMW, Volvo, Toyota, Nissan, Mitsubishi, Peugeot, Honda vehicles, in which the required level of operating properties is GL-4 or lower.
Comply with the manufacturer’s instructions provided in the user’s manual. -
$111.00
Code : MN2701
Specifications : API GL-4
Recommendation / OEM Approval : DIN 51524-2 / ALLISON C4 / VOLVO VCE WB 101, 97303 / ZF TE-ML 03E, TE-ML 05F, TE-ML 06E, TE-ML 06F, TE-ML 06K, TE-ML 17E, TE-ML 21F / CASE I H MS 1204, MS 1206, MS 1207, MS 1209 / CASE NEW HOLLAND MAT 3525/MAT 3526 / PARKER DENISON HF-0/HF-1/HF-2 / CATERPILLAR TO-2 / FORD NEW HOLLAND ESN-M2C41-B / FORD NEW HOLLAND ESN-M2C86-A / FORD NEW HOLLAND ESN-M2C86-B / FORD NEW HOLLAND ESN-M2C86-C / FORD NEW HOLLAND ESN-M2C134-A / FORD NEW HOLLAND ESN-M2C134-C / FORD NEW HOLLAND ESN-M2C134-D / SPERRY VICKERS M-2950-S, I-280-S / EATON M-2950-S, I-280-S / MASSEY FERGUSON M 1135, M 1141, M 1143, M 1145 / NEW HOLLAND NH 420A, NH 410B / JOHN DEERE 20C/20D / KUBOTA UDT Fluid / SAUER SUNDSTRAND DANFOSS Hydro Static Trans Fluid
Product Details
A universal and multi-functional mineral all-season tractor oil for farm holdings and tractors, agricultural vehicles with very high operating characteristics. Its main purpose: an oil for on-board gearboxes with a standard replacement interval. It complies with Volvo 97303 requirements. It is also suitable for mechanical gearboxes with and without synchronizers, transmissions (including power transmissions), back axles, hydraulic systems (including the ones integrated with a mechanical gearbox) and other equipment that requires Universal Tractor Transmission Oil (UTTO) grade oil. It is particularly suitable for the reduction of vibration in “wet” brake systems and power-take off.
Product properties:
– It cannot be used as an engine oil. It is not recommended to be used as a transmission oil complying to the Caterpillar TO-4 requirements;
– A special complex of additives ensures an extended service life of friction discs of oil-immersed “wet” brakes and clutches. It prevents a clutch and transmission from sliding and minimises the adjusting necessity;
– A highly-purified highest-quality mineral base with the addition of a newest additive package with an ideal viscosity in a wide range of temperatures and a high viscosity index, ensures a reliable operability of subsystems and mechanisms in any conditions and as well as a significant fuel conservation;
– Due to its unique composition, it ensures excellent antiwear and anti-scuffing properties that significantly extend the expected life of the technical equipment in all, even the most extreme, modes of operation in a wide range of ambient temperatures. High anti-scuffing characteristics extend the service life of gears and bearings in the conditions of high temperatures and loads;
– It ensures good low-temperature characteristics that ensure an easy starting of hydraulic subsystems, reliable lubrication at any ambient temperatures (up to -45 °C) and in any operating conditions;
– It has a unique oxidation stability and an excellent resistance to the high-temperature thermal degradation that allows increasing the oil replacement age and reducing equipment maintenance costs;
– It has excellent cleaning properties and provides an effective protection against sludge and abrasive sediments that destroy stuffing boxes;
– Due to the use of last-generation corrosion inhibitors, it effectively protects metal parts from all types of corrosion. It protects parts from oxidation and rusting. It minimises the formation of carbon and dirt deposits even during the operation in high humidity conditions. It extends the service life of the equipment;
– It provides an excellent compatibility with sealing materials, prevents them from swelling, hardening and shrinking thus reducing the costs for spare parts and preventing leakages;
– It reduces noise;
– It is not recommended to mix the oil with other types of hydraulic and engine oils.It is mostly designed for agricultural equipment , but can also be used for off-road (construction, quarry, mining) and special equipment (loaders, bulldozers, excavators, etc.) produced by European, American and Asian manufacturers, that is operated under harsh conditions when the required level of operating properties is WB-101 and of other above-mentioned specifications. It is used for dock reach-stackers, telescopic, forklift and front loaders, harvesters (timber-loading equipment), road-construction equipment (scrapers, road rollers, bulldozers, soil compactors), in the construction industry.
Comply with the manufacturer’s instructions provided in the user’s manual. -
$111.00
Multi-Tape – self-adhesive tape without an adhesive layer – polymerises when wound and stretched. Creates a seamless, dense and durable air- and waterproof layer-bandage, “sintering” into a homogeneous mass. It is used for effective insulation and corrosion protection of metal components of automotive, construction and agricultural machinery operating under pressure, at high temperatures and in a humid and aggressive environment, as well as in industry and in everyday life. It allows you to quickly eliminate leaks from fuel, water and air pipes. It can be applied to extreme conditions for temporary use, leaving no trace after removal.
Properties:
– Easy to use;
– Has high strength – resistant to high mechanical loads (including breaking) and wear – resistant to abrasion;
– Resistant to chemical agents, including acids, alkalis, oil and fuel;
– Resistant to micro-organisms (rotting) and pollution;
– Resistant to ageing, high temperatures, water, UV radiation;
– Has excellent electrical insulation properties;
– Fits complex shapes well – does not slip;
– Reduces the noise level;
– Tape length: 5 m.Application:
Thanks to its flexibility, it is easily wound on any type of surface, including wet, heated and greasy surfaces. -
$111.00
Code : MN2501
Specifications : SAE 10W-30 / 10W30 / API CG-4/CF-4/CF/CE/CD/SF / API GL-4 / ACEA E3 / DIN 51524-3 HVLP
Recommendation / OEM Approval : ALLISON C4 / CASE I H MS 1204 / CASE I H MS 1206 / CASE I H MS 1207 / CASE I H MS 1209 / CASE NEW HOLLAND MAT 3525 / CASE NEW HOLLAND MAT 3526 / CATERPILLAR TO-2 / EATON M-2950-S / I-286-S / FORD ESN-M2C86-B / FORD ESN-M2C86-C / FORD ESN-M2C134-D / FORD WSS-M2C159-B / FORD WSS-M2C159-C / FORD NEW HOLLAND 82009201 / FORD NEW HOLLAND 82009202 / FORD NEW HOLLAND 82009203 / JOHN DEERE J27 / JOHN DEERE J20C / JOHN DEERE J20D / MASSEY FERGUSON M 1135 / MASSEY FERGUSON M 1139 / MASSEY FERGUSON M 1143 / MASSEY FERGUSON M 1144 / MASSEY FERGUSON M 1145 / MB 227.1 / MB 228.1 / NEW HOLLAND MAT 3525 / NEW HOLLAND MAT 3526 / SAUER SUNDSTRAND DANFOSS Hydro Static Trans Fluid / SPERRY VICKERS M-2950-S / I-286-S / ZF 06A / VOLVO WB 101 / ZF 06B (INC. 06R) / ZF 06C / ZF 07B / Others VOLVO WB 101, suitable for wet brakes
Product Details
A genuinely universal engine-transmission all-season semi-synthetic (HC-synthese) engine oil for modern diesel-powered engines of agricultural equipment with and without a turbocharger operating under harsh conditions as well as for manual transmissions, “wet”-type brake systems and even hydraulic systems of tractors. It was developed specially for solving particular agricultural equipment issues, ensuring the protection of the technical equipment and receiving the maximum return regardless of its operating conditions. It belongs to the STOU (Super Tractor Oil Universal) class.
The use of agricultural equipment is characterised by a high dependency of the operation mode and weather conditions, the possibility of a round-the-clock operation, the remoteness from service centres, a wide range of additional attachments and, most commonly, a poor technical competence of the personnel. The use of MANNOL Multifarm STOU 10W-30 eliminates the risk of the equipment issues related to the oil use confusion, when the markings on the containers become illegible due to weather conditions when stored outdoors. The oil use facilitates accounting and storage. In the field, it is enough to take one canister and resolve the issue of adding oil into any piece of equipment in any situation.Product properties:
– Innovative additives combined with a semi-synthetic base of the highest quality with a high viscosity index ensure excellent antifriction, antiwear and anti-scuffing properties that significantly extend the expected life of the equipment in all, even most extreme, operation modes in a wide range of ambient temperatures and ensure the fuel conservation;
– Synthetic components combined with natural antioxidants give the oil an enhanced thermo-oxidising stability that, when combined with excellent cleaning-dispersing properties (TBN >10) efficiently reduce the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine and transmission parts exceptionally clean throughout the entire time between replacements;
– A unique HC-containing formula ensures the resistance of the oil to oxidation and ageing, and, due to а reduced evaporating ability and an increased flash point, the oil consumption through burning is reduced;
– Due to the HC-containing optimal-viscosity base, it has excellent low-temperature properties, including a low freezing point that would ensure an excellent oil pumping quality and the cranking ability of engine and transmission subsystems at low temperatures, an easy “cold start” (up to -30 °С) and the reduction of the startup wear;
– It effectively protects from engine and transmission parts from all types of corrosion and the seal assembly from acid corrosion;
– It has a reduced foam formation ability;
– A special additive package was developed taking into account difficult operating conditions encountered as well as the low fuel quality.It is designed for all types of high-load diesel-powered engines of agricultural equipment, for which the required level of operating properties is CG-4 or lower and for high-load manual transmission of the aforementioned equipment for which the required level of operating properties is GL-4.
It can be used for hydraulic systems, hydrostatic and manual transmissions, wet brake systems and multiple-disc clutches, power take-off and power steering of all types of tractor equipment.
It may be used in petrol-powered engines with a required level of operating properties API SF or lower. -
$111.00
Code : MN2502
Specifications : SAE 10W-40 / 10W40 / API CG-4/CF-4/CF/CE/CD/SF / API GL-4
Recommendation / OEM Approval : ALLISON C4 / DIN 51524-3 HVLP / CASE I H MS 1204 / CASE I H MS 1206 / CASE I H MS 1207 / CASE I H MS 1209 / CASE NEW HOLLAND MAT 3525 / CASE NEW HOLLAND MAT 3526 / CATERPILLAR TO-2 / FORD ESN-M2C86-B / FORD ESN-M2C86-C / FORD ESN-M2C134-D / FORD WSS-M2C159-B / FORD WSS-M2C159-C / FORD NEW HOLLAND 82009201 / FORD NEW HOLLAND 82009202 / FORD NEW HOLLAND 82009203 / JOHN DEERE J27 / JOHN DEERE J20C / JOHN DEERE J20D / MASSEY FERGUSON M 1135 / MASSEY FERGUSON M 1139 / MASSEY FERGUSON M 1143 / MASSEY FERGUSON M 1144 / MASSEY FERGUSON M 1145 / MB 227.1 / MB 228.1 / NEW HOLLAND MAT 3525 / NEW HOLLAND MAT 3526 / VOLVO WB 101 / EATON M-2950-S/I-286-S / SPERRY VICKERS M-2950-S/I-286-S / ZF 06A / ZF 06B (INC. 06R) / ZF 06C / ZF 07B / Others VOLVO WB 101, suitable for wet brakes / SAUER SUNDSTRAND DANFOSS Hydro Static Trans Fluid
Product Details
A truly universal all-weather semi-synthetic motor-transmission (HC-synthes) engine oil for modern diesel engines of agricultural machinery with and without turbocharger operating in difficult conditions, as well as for mechanical transmissions, wet-type braking systems and even tractor hydraulic systems. Designed specifically to solve the specific problems of agricultural machinery, to protect the equipment and get the most out of it, regardless of the conditions of its operation. Belongs to the class STOU (abbr. From Super Tractor Oil Universal).
A feature of the use of agricultural machinery is the high dependence of the operating mode on weather conditions, the possibility of round-the-clock operation, remoteness from service centers, a large assortment of additional attachments and, as a rule, low technical training of personnel. The use of MANNOL Multifarm STOU 10W-40 eliminates equipment breakdowns associated with confusion in the use of oil, when, due to the storage in the open air, the marking on containers under the influence of weather factors becomes unreadable. The use of oil makes accounting and storage easier. In the field, it is enough to take one canister and in any situation, solve the issue of adding oil to any unit.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality with a high viscosity index provide excellent anti-friction, anti-wear and extreme pressure properties, which significantly prolongs the life of the equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides fuel economy;
– Synthetic components in combination with natural antioxidants give the oil increased thermal oxidative stability, which, combined with excellent detergent-dispersant properties (TBN> 10), effectively reduces carbon and varnish formation, prevents the formation of deposits of all kinds and maintains engine parts and transmission in excellent cleanliness throughout the interval between replacements;
– A unique HC-containing formulation provides oil resistance to oxidation and aging, and due to reduced volatility and high flash point, reduces oil consumption “for waste”;
– Due to the HC-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, which provides excellent oil pumpability and cranking of engine and transmission components at low temperatures, easy “cold start” (up to -30 °С) and lower starting wear and tear;
– Effectively protects engine parts and transmissions from all types of corrosion, and seals against corrosion by acids;
– Has reduced foaming;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of highly loaded diesel engines of agricultural machinery, where the level of operational properties of CG-4 or lower is required, and for highly loaded mechanical transmissions of this equipment where a level of operational properties of GL-4 is required.Applicable for hydraulic systems, hydrostatic and mechanical transmissions, wet brakes and multi-plate clutches, power take-off shaft and power steering for all types of tractor equipment.
It can be used in gasoline engines where API SF or lower performance is required. -
$111.00
Modern office chair with MANNOL logos, made of a durable steel frame, synthetic leather, PVC and filled with high-resilient foam. Provides ergonomic comfort.
Colour: navy blue / silver
-
$111.00
Catalogue of MANNOL oils, greases and fluids.
-
$111.00
Oil change service sticker is to be filled with all necessary information of your actual oil change as well as the next planned date. It is to be sticked to an easily accessible and visible place in the engine compartment.
-
$111.00
Oil Leak-Stop is a special engine oil additive made by using unique technologies. Compatible with any engine oil and suitable for any type of engine. Recommended for extreme operating conditions, high oil consumption and unstable engine operation.
Properties:
– Modifies the surface structure of piston rings and hydro-compensators;
– Restores elasticity of seals and gaskets;
– Reduces oil flow through the piston rings by maintaining the oil viscosity at the required level.Application: Add to the engine oil at any time. Warm the engine up and let it run idle for 10 minutes. The sealing effect is achieved after 600-800 km. For a long-term effect, apply at every oil change. A can of 250 ml is enough for a 6 L oil system.
Note: Do not use in motorbikes with a wet clutch. -
$111.00
Oil change service sticker is to be filled with all necessary information of your actual oil change as well as the next planned date. It is to be sticked to an easily accessible and visible place in the engine compartment.
Code : AD3001
Specifications : DIN 70070 / ISO 22241-1 / ISO 22241-2 / ISO 22241-3
Recommendation / OEM Approval :
Product Details
AdBlue® is a high-purity 32,5 % w/w urea solution which is used as an additional working fluid in diesel cars and trucks equipped with SCR technology (Selective Catalytic Reduction). The composition of AdBlue® is specified in DIN 70070. The use of such systems optimises engine performance, reduces the emission of harmful particles in exhaust gases and complies with the environmental standards Euro 4, Euro 5 and Euro 6.
AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA Verband der Automobilindustrie e.V.).
Code : MN8207
Specifications : JASO M315, Class 1-A-LV
Recommendation / OEM Approval : AISIN WARNER JWS 3309 / AISIN WARNER JWS 3324 / AISIN WARNER ATF-0T4 / AISIN WARNER ATF-0WS / SATURN Z 000169756 / ALLISON C4 / ALLISON C3 / ALLISON C2 / ALLISON 389 / BENTLEY PY112995PA / CASTROL TE-ML 09 / FORD Mercon LV / FORD ESP-M2C138-CJ / FORD ESP-M2C166-H / FORD XT-10-QLV [LV] / FORD XT-2-QDX [M] / FORD XT-2-QSM [Syn] / FORD XT-5-QM [V] / FORD XT-5-QSM [V Syn] / FORD XT-6-QSP [SP] / FORD XT-8-QAW [Premium] / FORD XT-9- QMM5 [FRN5] / FORD WSS-M2C922-A1 / GM Dex-VI [GMW 16444] / GM Dex [GM 6032M] / GM Dex-B [GM 6032M] / GM Dex-IIC [6137M] / GM Dex-IID [GM 6137M] / GM Dex-IIE [GM 6137M] / GM Dex-IIIF [GM 6297M] / GM Dex-IIIG [GM 6417M] / GM Dex-IIIH [GM N10055] / GM 19 40 700 / GM 19 40 767 / GM 21005966 / GM 88900925 / GM 9985010 / GM 9986195 / GM Type A Suffix A / GM Saturn T-IV Fluid / GM Saturn 22689186 / GM ATF Z1 / GM Saturn 22717466 / GM AW-1 / GM 19256039 / GM ATF WS / GM 88863400 / GM 88863401 / HYUNDAI ATF SP-IV / HYUNDAI ATF RED-1K / HYUNDAI Genuine ATF / HYUNDAI JWS 3314 / HYUNDAI 00232-19023 / HYUNDAI 040000C90SG / HYUNDAI 04500-00140 / HYUNDAI UM040 CH20 Red-1 / HYUNDAI SP / HYUNDAI SP4-M1 / HYUNDAI SPH-IV / HYUNDAI SP-II / HYUNDAI SP-III / HYUNDAI SP-IV / HYUNDAI SP-IV-RR / HYUNDAI WS, spec NWS-9638 / KIA SP-IV / KIA ATF RED-1K / KIA ATF SP-IV / KIA Genuine ATF / KIA JWS 3314 / KIA 00232-19023 / KIA 040000C90SG / KIA 04500-00140 / KIA SP / KIA UM040 CH20 Red-1 / KIA SP4-M1 / KIA SPH-IV / KIA SP-II / KIA SP-III / KIA SP-IV-RR / KIA WS, spec NWS-9638 / TOYOTA ATF WS Lifetime / TOYOTA JWS 3324 / TOYOTA ATF FZ / TOYOTA JWS 3309 / TOYOTA 08886-81015 / TOYOTA Type T, T-II, T-III, T-IV / TOYOTA Type D-II / MB 236.14 / MB A 0019892203 / MB ATF 3403-M115 / MB 236.1 / MB 236.10 / MB 236.11 / MB 236.12 / MB 236.15 / MB 236.2 / MB 236.41 / MB 236.5 / MB 236.8 / NISSAN Matic S / VOLKSWAGEN LT 71141 / VOLKSWAGEN G 052 162 [AG4] / VOLKSWAGEN G 052 533 / VOLKSWAGEN G 052 990 A2 / VOLKSWAGEN G 055 005 A2 / VOLKSWAGEN G 055 025 A2 / VOLKSWAGEN G 055 162 A2 / VOLKSWAGEN G 055 540 A2 / VOLKSWAGEN G 060 162 A2 / VOLKSWAGEN G US 000 162 / NISSAN Fluid A / NISSAN Matic D / NISSAN Matic J / NISSAN Matic K / NISSAN Matic W / NISSAN N402 / NISSAN 999MP-MTJ00P, 999MP-MTS00P / BMW ATF 3+ / BMW ATF4 / BMW ATF6 / BMW ETL-7045 / BMW ETL-7045 E / BMW ETL-8072B / BMW LA 2634 / BMW LT 71141 / BMW M-L12108 / BMW 81 22 9 400 272 / BMW 81 22 9 400 275 / BMW 81 22 9 407 858 / BMW 81 22 9 407 859 / BMW 83 22 0 024 249 / BMW 83 22 0 024 359 / BMW 83 22 0 026 922 / BMW 83 22 0 142 516 / BMW 83 22 0 397 114 / BMW 83 22 0 402 413 / BMW 83 22 0 403 248 / BMW 83 22 0 403 249 / BMW 83 22 2 152 426 / BMW 83 22 2 163 514 / BMW 83 22 2 220 438 / BMW 83 22 2 220 440 / BMW 83 22 2 220 442 / BMW 83 22 2 289 720 / BMW 83 22 2 305 396 / BMW 83 22 2 305 397 / BMW 83 22 2 355 599 / BMW 83 22 2 355 601 / BMW 83 22 7 542 290 / BMW 83 22 9 407 765 / BMW 83 22 9 407 807 / MINI ATF JWS 3309 / MINI 83 22 0 402 413 / FCA ATF+4 / FCA 68171866AA / FCA ATF+3 / FCA ATF+2 / FCA ATF+ / FCA ASRC / FCA 8 & 9 Speed ATF / FCA 68218925AA / FCA 68218925AB / FCA AW-1 / FCA 68092912AA / FCA 68043742AA / FCA Dex-VI / FCA 05127382AA / FCA 05127382 / FCA 68157995AA / FCA 68157995AB / FCA 68333587AA / FCA SP-IV / FCA SP-III / FCA 68171869AA / FCA Type 7176E / FCA Type 9602 / ATF M-1375.4 / ATF M-1375.6 / ATF LA 2634 / ATF L12108 / ATF ETL-7045 E / ATF 3403-M115 / ATF 3100 PL085 / ATF 3353 / ATF 134 / ATF K17 / ATF N402 / DAIHATSU D3-SP / HONDA ATF DW-1 / HONDA 08200-9008 / HONDA ATF Type 3.0 / HONDA 08200-9016-A / HONDA ATF Type 3.1 / HONDA 08200-9017 / HONDA ATF Z1 / HONDA 08200-9001 / HONDA 08200-9001A / ISUZU ATF II / ISUZU ATF III / ISUZU Genuine ATF / ISUZU 08200-9001 / ISUZU SCS / JAGUAR WSS-M2C922-A1 / JAGUAR 02JDE 26444 / JAGUAR Fluid 8432 / JAGUAR JLM 20238 / JAGUAR JLM 20292 / JAGUAR JLM 21044 / JAGUAR K17, Jatco 3100 PL085 / JAGUAR LT 71141 / LAND ROVER ATF N402 / LAND ROVER AW-1, LR0022460: LV / LAND ROVER JWS3309US / LAND ROVER TYK500050 / LAND ROVER LR023288/LR023289 / MAN 339A / MAN 339D / MAN 339F / MASERATI Oil No. 231603 / MAZDA ATF FZ, ATF N-1, ATF S-1 / MAZDA ATF M-5, 0000-23-ATF -M5 / MAZDA F-1 / MAZDA JWS3317 / MAZDA M3 / MAZDA Type T-IV, JWS 3309 / PEUGEOT Z 000169756 / PORSCHE JWS 3309 / PORSCHE 000 043 205 28 / PORSCHE LT 71141 / PORSCHE 000 043 204 63 / PORSCHE 000 043 304 00 / PORSCHE 999 917 547 00 (A2) / PORSCHE 000 043 205 09 / PSA AL4 / 4HP20 / PSA 9730AE / PSA B71 2340 / RENAULT DP-0 / RENAULT Matic D2 / RENAULT SATF-D / Oil No. PL 31493PA / SAAB ATF HP / SAAB JWS 3309 / SAAB 93 160 393 / SAAB 93 165 147 / ROLLS_ROYCE Dex-IIIG / ROLLS_ROYCE T-IV Fluid / ROLLS_ROYCE 22689186 / SSANGYONG DSIH 5M-52 / SSANGYONG DSIH 5M-66 / SUBARU ATF HP / SUBARU ATF-WS / SUBARU K0140Y0700 / SUBARU SOA635040 / SUZUKI ATF 2326 / SUZUKI ATF 2384K / SUZUKI ATF 3314 / SUZUKI ATF 3317 / SUZUKI ATF 5D06 / SUZUKI Matic D / SUZUKI Matic J / SUZUKI Matic S / VOLVO 1161521 / VOLVO 1161621 / VOLVO 1161640 / VOLVO 1161540 / VOLVO 31 256 774 / VOLVO 31 256 775 / VOLVO 97340, AT100 / VOLVO 97341, AT101 / ZF LifeguardFluid 5 (ZF No. S671 090 170) / ZF LifeguardFluid 6 (ZF No. S671 090 255) / ZF LifeguardFluid 8 (ZF No. S671 090 312) / ZF LifeguardFluid 9 (ZF No. AA01.500.001) / ZF TE-ML 05L / ZF TE-ML 11A / ZF TE-ML 11B / ZF TE-ML 21L
Product Details
A universal all-season synthetic transmission fluid (ATF) for automatic gearboxes, hydraulic converters, hydraulic power steering systems, car hydraulic clutches and other hydraulic devices, including the ones operating in heavy-duty conditions in trucks and off-road vehicles. It ensures a flawless operation of an automatic gearbox, guarantees minimal wear, a lasting service life of transmissions and fuel economy. It was developed on the basis of the requirements set by GM and Ford groups.
Product properties:
– The highest-quality low-viscosity synthetic base with a consistent high viscosity index in combination with a multifunctional additive package preserves all its properties in a wide range of temperatures: it ensures good lubricating properties at low (-45 °C and lower) temperatures in winter and ensures a stable oil film under extreme loads and at high temperatures in summer;
– The high-technology combination of additives ensures excellent antifriction properties for gear couplings and superior friction properties for friction elements thus ensuring a significant fuel economy, a continuous, exact and smooth transmission shift in any driving conditions and an extended service life of the automatic gearbox itself and all transmission elements. It ensures a coordinated and smooth operation of clutches. It prevents scuffing;
– It has an exceptional thermal-oxidative and chemical stability and resistance to the high-temperature thermal degradation throughout the entire service life. It allows reducing lacquering, formation of sludge, soot and other carbon deposits, increasing the time between oil changes and ensuring the durability of transmission components thus reducing the equipment maintenance costs;
– It effectively protects metal parts from ferrous and non-ferrous alloys (especially radiators) from corrosion when both in and not in operation; It has a great compatibility with friction coupling materials;
– It effectively resists aeration and foam formation;
– It ensures an excellent compatibility with all sealing materials, prevents them from swelling, hardening and shrinking that allows reducing the costs for spare parts and prevents leakages. It effectively protects fluoroelastomer seals of heavy equipment;
– It reduces noise.
It is recommended for automatic gearboxes of passenger cars requiring the ATF Type Dexron-VI or Dexron-III H/G/F or Dexron-III E or FORD MERCON LV quality oil. It is recommended for use in new 6-speed transmissions of GM, BMW, Land Rover, Jaguar vehicles, as well as 8- and 10-speed transmissions of Aisin vehicles.
Colour: red.
Comply with the manufacturer’s instructions provided in the user’s manual!
Diesel fuel additive for cleaning and regeneration of all types of Diesel Particulate Filters (DPF) without dismantling and disassembling. Suitable for all types of diesel fuel and for all types of diesel engines equipped and not equipped with automatic DPF regeneration systems. Especially recommended for cars operating in the city (in traffic jams) and / or when using low quality fuel.
Regular use helps to restore the DPF to factory settings.
Product properties:
– Reduces the ignition temperature of soot in DPF, thereby accelerating and facilitating the process of its afterburning at all engine operating modes, and especially in urban mode, thereby extending the filter life and reducing the cost of operating the car;
– Increases the completeness of fuel combustion, thereby reducing its consumption, all other things being equal;
– By increasing the completeness of combustion, it increases power and reduces soot formation and toxicity of exhaust gases. It can be used to prevent clogging of the particulate filter.
Application: Add to the tank before refueling in the ratio of 400 ml to 60 liters of fuel. Use every 2000 km.
Recommended for regular use.
Code : MN3002
Specifications : SAE J1703/J1704 / ISO 4925 / FMVSS 116 DOT 4 / JIS JAPAN K2233
Recommendation / OEM Approval :
Product Details
Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors. Designed for hydraulic systems of all traditional brake devices and clutches.
Product properties:
– Contains boric acid, which completely neutralizes water condensate;
– Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C);
– Has the highest chemical and thermal stability;
– Offers excellent lubricity and viscosity-temperature properties;
– Neutralizes the formation of vapour bubbles;
– Compatible with elastomers;
– Entirely inactive for the parts of the brake system.
Aggressive to paintwork.
Follow the manufacturer’s instructions in the instruction manual!
Color: colorless / light brown.
Code : MN7715
Specifications : SAE 5W-30 / 5W30 / API SN / ACEA C3
Recommendation / OEM Approval : MB 229.51 / VOLKSWAGEN TL 52 195 / BMW Longlife-04 / PORSCHE C30 / VOLKSWAGEN 504 00 Approval / VOLKSWAGEN 507 00 Approval
Product Details
Innovative universal premium bi-synthetic engine oil (PAO-based) for modern petrol and diesel engines of VW group cars (including direct injection) with and without turbocharging, including those equipped with pump-injectors (Pumpe-Düse).
Product properties:
– Due to the ester components contained, it has excellent anti-wear, extreme pressure and anti-friction properties, which ensures long and trouble-free operation of the pump-nozzle system and the entire gas distribution mechanism, reducing cam wear;
– Due to its excellent detergent-dispersing properties and high thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– Saves fuel due to optimal anti-friction properties;
– Ester components together with the bi-synthetic base provide a low solidification temperature (-45 °C and below) and guarantee easy low-temperature engine start-up due to exceptional turn ability and pump ability, which significantly reduces engine starting wear;
– It has optimal viscosity over a wide temperature range, which ensures stable operation in all operating modes, including in urban mode and under overload conditions;
– Due to its high thermal-oxidative stability, it effectively resists aging;
– Compatible with all exhaust gas neutralization systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Suitable for engines running on liquefied natural gas (LNG) and petroleum gas (LPG).
Designed for gasoline and diesel engines of EURO IV and EURO V wide fleet of vehicles (cars, light SUVs, vans and light trucks) of VW imposes additional requirements on motor oils in accordance with the specifications 504.00/507.00 and previous.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7919
Specifications : SAE 0W-30 / 0W30 / API SN/SN Plus / API SP / ACEA C2
Recommendation / OEM Approval : ACEA C3 / BMW LL-12FE / MB 229.61 / FORD WSS-M2C950-A / OPEL OV0401547 / PSA B71 2290 / PSA B71 2312
Product Details
Innovative universal bi-synthetic (PAO+esters) premium engine oil for modern petrol and diesel engines with and without turbocharging.
Product properties:
– Exceptional fuel savings obtained due to the reduced HTHS viscosity and optimal antifriction properties;
– A low-viscosity bi-synthetic base (PAO+esters) and a high-efficiency additive package ensure a steady cold start in the harshest conditions thus reducing the startup wear of the engine;
– For turbocharged engines with direct injection the unique oil formula completely nullifies the effect of LSPI (Low Speed Pre-Ignition);
– Due to excellent cleaning-dispersing properties and the highest thermo-oxidising stability, it efficiently fights against all types of deposits (including varnish, sludge and high temperature deposits) and maintains engine and turbocharger separate parts clean during the entire period between the oil changes;
– Ester oil components ensure excellent anti-wear properties due to the exceptional durability of the oil film, which, when combined with excellent pumpability, significantly extends the service life of the engine even in “Start-stop” driving modes. Effectively protects the timing chain against wear;
– Compatible with all exhaust gas aftertreatment systems, DPF, TWC, EGR and SCR by using Mid SAPS technology;
– Used in engines with extended oil change intervals (Long Life up to 30,000 km) as well as in ordinary ones;
– The modern additive package combined with the bi-synthetic base preserves power parameters of the engine throughout the entire interval between oil changes.
Designed for petrol- and diesel-powered engines of MERCEDES-BENZ, FORD, BMW etc. passenger cars, lightweight off-road vehicles and light trucks that impose additional requirements for engine oils in accordance with the listed specifications and the preceding ones or where the performance level of API SP or lower and ACEA C2/C3 of the given viscosity grade is required.
The oil is not suitable for use in heavy trucks and similar vehicles!
The Latest development – a lubricating additive in gasoline. It is intended for all types of fuel systems of gasoline engines, first of all – for engines with direct fuel injection into cylinders. In diesel engines, such a power system was introduced earlier and showed its effectiveness, but also found a number of problems related to the lack of quality of lubrication of moving metal parts of the fuel system, and especially the high pressure fuel pump. We present a multifunctional complex for gasoline fuel. This balanced package of additives meets the most modern requirements, is compatible with any gasoline fuel, is easily mixed with it and completely dissolves, and is guaranteed to improve any commercial gasoline fuel, even if it contains ethanol, giving it best consumer properties, transferring it to the rank of the so-called "brand" fuel. When testing the lubricity of commercial gasoline AI-95, a more than twofold decrease in the diameter of the wear spot was recorded when only 0.1% of the additive was introduced into the fuel (1 liter of additive per 1000 liters of gasoline). In addition, the additive has a friction modifier and an ignition promoter, which increases the completeness of fuel combustion and reduces the formation of carbon deposits in the combustion chamber. With regular use of the additive, engine performance improves and significant fuel savings occur (2-5%)
Properties:
– Guaranteed to improve the lubricity of gasoline, protects the entire fuel system and its individual elements from corrosion, especially: all types of injectors, carburetor jets, fuel pumps, intake valves and the combustion chamber, prevents excessive fuel and oil consumption;
– All other things being equal, it increases the engine power and acceleration of the car, including by improving the lubricating properties of gasoline, reducing friction in the cylinder zones and ensuring optimal fuel dispersion;
– Reducing carbon formation, smoke and toxicity, increases the life of spark plugs, oxygen sensors, catalysts, injectors (injectors) and the engine as a whole;
– Forms a stable oil film on the parts of the fuel system, which prevents their corrosion;
– The strong and stable oil film formed when using Benzin Ester Additive significantly reduces the wear of all rubbing pairs of the fuel system, thereby increasing its service life, and also reduces the wear of cylinders, pistons and piston rings;
– Eliminates problems with starting, restores the uniformity of idle speed and reduces detonation;
– A clean engine uses less fuel and emits less harmful substances;
– Compatible with all exhaust gas and turbocharging systems;
– Compatible with all construction materials;
– Recommended for preserving the engine when it is idle for a long time.
Application: Add to the tank in the ratio of 50 ml per 50 liters of fuel.
Recommended for regular use.
Shelf life: 5 years from the date of production.
Code : MN7915
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : MB 229.5 / MB 229.3 / MB 226.5 / JASO MA2 / VOLKSWAGEN 502.00 / VOLKSWAGEN 505.00 / PORSCHE A40 / RENAULT RN0710 / RENAULT RN0700 / BMW LL-01 / BMW LL-98 / PSA B71 2296 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative universal ester-containing premium motor oil for modern gasoline and diesel engines with and without turbocharging, including “old” brands and high mileage. Designed based on the requirements of European producers.
Product properties:
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Applicable to 4T wet clutch motorcycle engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in the engines of Daimler, VW, Opel, GM, Renault vehicles imposing additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7908
Specifications : SAE 5W-30 / 5W30 / API SN/CH-4 / ACEA C2 / ACEA C3
Recommendation / OEM Approval : VOLKSWAGEN 505.01 / BMW LL-04 / MB 229.52 / MB 229.31 / MB 226.5 / GM dexos2 / RENAULT RN0700 / RENAULT RN0710 / MB Approval 229.51
Product Details
Innovative, versatile, all-synthetic ester-containing premium synthetic engine oil for modern diesel and gas turbocharged and non-turbocharged engines. Designed in accordance with the requirements of European automakers.
Product properties:
– High fuel efficiency due to optimal antifriction properties;
– Highly effective additive package and synthetic base provide confident cold start in any conditions, thereby significantly reducing engine starting wear;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– The presence of ester components in combination with optimal viscosity-temperature characteristics guarantees the highest strength of the oil film, which provides excellent anti-wear properties which, combined with excellent pumpability, significantly increase engine life even in the most severe operating conditions;
– Compatible with all exhaust gas aftertreatment systems;
– Suitable for engines using liquefied natural gas (LNG) and liquefied petroleum (LPG) gas;
– It is applied in engines with the extended interval of replacement of oil (Long Life) to 40 000 km and ordinary.
Designed for gasoline and diesel engines in a wide fleet of cars, light SUVs, minibuses and light trucks of European and other manufacturers, where the performance level of ACEA C3 is required.
Due to its versatility, it is especially recommended for taxi fleets.
The oil is not suitable for use in heavy trucks and similar vehicles!
