-
$111.00
Reifen Doctor-an easy-to-use special spray tool for emergency repair of punctures of chamber and tubeless tires on cast and stamped wheels without dismantling them. The resulting foam quickly and reliably seals punctures and leaks of all types up to 5 mm in diameter by creating a long-lasting self-vulcanizing film when interacting with air. Applicable to all tire sizes of passenger cars, light trucks and trailers. Not applicable for gusts and long slits, or when the tire has slipped off the disk.
Properties:
– Remains in the tire in the active state for a long time and prevents the occurrence of air leaks in the future, including repeated punctures;
– Does not lead to the formation of oxides and rust on the surface of the wheel;
– Does not affect wheel balancing;
– Does not freeze in the coldApplication:
1. If possible, remove the cause of the puncture (nail, self-tapping screw, etc.). Turn the wheel down with the puncture and completely release the remaining air from the tire.
2. In the cold, warm the balloon to a temperature not lower than + 15° C (in a warm cabin, for example), then shake thoroughly.
3. Screw the cylinder connector onto the tire valve.
4. Hold the balloon vertically and inject the entire contents of the balloon into the tire. One cylinder is sufficient for one tire with a rim diameter (landing diameter) of 15′.
5. Inflate the tire to the required pressure. In order for the foam to be evenly distributed inside the tire and reliably seal the punctures, it is necessary to drive at an average speed of 70 km/h 10-15 km.
6. As soon as possible, contact the service Station for professional tire repair, until then, regularly monitor the air pressure in the tire.Note: Not suitable for use in direct measurement tire pressure monitoring systems (TPMS).
-
$111.00
Navy blue roll-up banner with a MANNOL logo.
-
$111.00
RTV BLUE SEALANT is a sealant that hardens at room temperature. Extremely resistant to extreme temperatures. Creates a reliable seal that does not crack, shrink or shift under the influence of sudden temperature changes. Replaces o-rings, washers, and asbestos, rubber, felt, paper, cork, and metal seals. It can be effectively used for repair of: valve guide bushings, oil pans, thermostat housings, pipes, hoses, and other flexible connections. Resistant to lubricants, coolants, gasoline, kerosene, water, acids and alkalis. Easy to apply and remains flexible. The surface to be treated must be degreased.
Operating temperature range: -40 °C to + 230 °C.
Store the sealant in cool and dry conditions in tightly closed original packaging.
It retains its strength for at least two years from the date of production. -
$111.00
Rust Dissolver is a fast – penetrating and fast-acting rust dissolving and removing agent with excellent anti-friction and water-repellent properties. It allows you to quickly and safely mount and dismantle hardware of all types, as well as lubricates and protects various movable joints from corrosion: door locks and hinges; levers for driving carburetor dampers; telescopic antennas; fasteners for body and chassis elements, etc. Contains substances which gradually release, during the operation, the molybdenum disulfide.
Properties:
– Thanks to the presence of fast-penetrating solvents in its composition, it instantly frees threaded connections from rust, oxides and dirt, which greatly facilitates their dismantling;
– Has good anti-corrosion properties, prevents formation of rust and oxides in the future. Forms a strong waterproof and heat-resistant protective coating;
– Improves the adhesion of the subsequent coating to the treated surface;
– The presence of molybdenum disulfide provides excellent anti-friction properties for mobile joints, ensuring their smooth operation, ease of movement and eliminating creaking for a long time;
– Can be used for drying interrupter-distributors, coils and spark plugs, as it displaces moisture and fuel from their working surfaces, helping to start damp engines and electrical appliances;
– Neutral to metal, plastic, rubber and paint surfaces;
– Can be used in household, service stations, industry and agriculture.Application: Shake the balloon well before use. Spray on a rusty surface from a distance of approximately 20 cm and let it soak in for 30 minutes. If necessary, wipe the surface with a piece of cloth to remove any remaining rust and dirt.
Volume: 450 ml
-
$111.00
Code : MN8112
Specifications : SAE 140 / API GL-4/GL-5
Recommendation / OEM Approval :
Product Details
A mineral simple-composition gear oil for mild operating conditions (low loads and sliding velocities).
It may be recommended for the lubrication of accessory equipment to be installed in special vehicles (reducers in autocranes, mechanisms on garbage trucks, side lifting components, etc.) when operating at temperatures no lower than 0 °С. -
$111.00
Code : MN7409
Specifications : SAE 40 / API CH-4/SJ
Recommendation / OEM Approval :
Product Details
A high-efficiency monograde mineral engine oil for heavy-load diesel-powered engines with and without a turbocharger operating under harsh conditions at ambient temperatures more than -20 °C.
Product properties:
– Due to the absence of viscosifiers, it is less susceptible to destruction and ageing than analogues all-season oils, it has an extended expected life which, when combined with a low evaporation ability that reduces oil consumption through burning, allows using it in engines with an extended oil replacement age;
– A highest-quality mineral base and thoroughly selected additives ensure good antifriction and antiwear properties that significantly extend the expected life of the equipment in comparison with oil analogues in all, even the most extreme, operation modes;
– In contrast with analogues, it has an enhanced thermo-oxidising stability due to natural antioxidants that, when combined with good cleaning-dispersing properties that reduce the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine parts clean throughout the entire time between replacements;
– It has fair low-temperature properties;
– It effectively protects engine parts against all types of corrosion;
– It may be used when operating on fuel with an increased sulphur content.It is meant for high-load diesel-powered engines of trucks, construction, mining and agricultural equipment, boats, locomotives, as well as stationary equipment. It is suitable for retro-vehicles.
It may be used as hydraulic oil in hydraulic systems including the ones that are combined with mechanic gearboxes or torque converters if the manufacturer requires the use of an engine oil of a specific-grade viscosity in these subsystems.
-
$111.00
Code : MN7407
Specifications : SAE 50 / API CH-4
Recommendation / OEM Approval :
Product Details
A high-efficiency monograde mineral engine oil for heavy-load diesel-powered engines with and without a turbocharger operating under very harsh conditions at ambient temperatures more than -15 °C.
Product properties:
– Due to the absence of viscosifiers, it is less susceptible to destruction and ageing than analogues all-season oils, it has an extended expected life which, when combined with a low evaporation ability that reduces oil consumption through burning, allows using it in engines with an extended oil replacement age;
– A highest-quality mineral base and thoroughly selected additives ensure good antifriction and antiwear properties that significantly extend the expected life of the equipment in comparison with oil analogues in all, even the most extreme, operation modes;
– In contrast with analogues, it has an enhanced thermo-oxidising stability due to natural antioxidants that, when combined with good cleaning-dispersing properties that reduce the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine parts clean throughout the entire time between replacements;
– It has fair low-temperature properties;
– It effectively protects engine parts against all types of corrosion;
– It may be used when operating on fuel with an increased sulphur content.It is meant for high-load diesel-powered engines of trucks, construction, mining and agricultural equipment, boats, locomotives, as well as stationary equipment. It is suitable for retro-vehicles.
It may be used as hydraulic oil in hydraulic systems including the ones that are combined with mechanic gearboxes or torque converters if the manufacturer requires the use of an engine oil of a specific-grade viscosity in these subsystems.
-
$111.00
Code : MN7408
Specifications : SAE 60 / API CH-4
Recommendation / OEM Approval :
Product Details
A high-efficiency monograde mineral engine oil for heavy-load diesel-powered engines with and without a turbocharger operating under extra-harsh conditions at ambient temperatures more than -15 °C.
Product properties:
– Due to the absence of viscosifiers, it is less susceptible to destruction and ageing than analogues all-season oils, it has an extended expected life which, when combined with a low evaporation ability that reduces oil consumption through burning, allows using it in engines with an extended oil replacement age;
– A highest-quality mineral base and thoroughly selected additives ensure good antifriction and antiwear properties that significantly extend the expected life of the equipment in comparison with oil analogues in all, even the most extreme, operation modes;
– In contrast with analogues, it has an enhanced thermo-oxidising stability due to natural antioxidants that, when combined with good cleaning-dispersing properties that reduce the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine parts clean throughout the entire time between replacements;
– It has fair low-temperature properties;
– It effectively protects engine parts against all types of corrosion;
– It may be used when operating on fuel with an increased sulphur content.It is meant for high-load diesel-powered engines of trucks, construction, mining and agricultural equipment, boats, locomotives, as well as stationary equipment. It is suitable for retro-vehicles.
It may be used as hydraulic oil in hydraulic systems including the ones that are combined with mechanic gearboxes or torque converters if the manufacturer requires the use of an engine oil of a specific-grade viscosity in these subsystems.
-
$111.00
Code : MN8113
Specifications : SAE 90 / API GL-4/GL-5
Recommendation / OEM Approval :
Product Details
A mineral simple-composition gear oil for mild operating conditions (low loads and sliding velocities).
It may be recommended for the lubrication of accessory equipment to be installed in special vehicles (reducers in autocranes, mechanisms of garbage trucks, side lifting components, etc.) when operating at temperatures no lower than – 18 °С. -
$111.00
Code : MN7404
Specifications : SAE 20W-50 / 20W50 / API SN/CH-4
Recommendation / OEM Approval :
Product Details
Universal economy-class engine oil, which is a mixture of synthetic components and a high purity mineral base, for modern highly accelerated petrol and diesel engines with and without a turbocharger used in difficult operating conditions and engines with a very high mileage used in various operating conditions.
Product properties:
– Reduces the leakage probability and maintains the required oil pressure even for engines with a high mileage due to stable viscosity and excellent compatibility with sealing materials;
– Low volatility decreases oil consumption through burning;
– A thoroughly balanced additive package ensures an efficient service of an engine in all modes of operation: cold start, increased load (off-road and uphill driving, towing, driving with maximum load) and in high-temperature ambient conditions;
– Long-lasting oil film effectively protects from wear, reduces friction and prevents corrosion;
– Ensures reliable lubrication of all engine components under all operating conditions;
– Low ash content and good detergent and dispersing properties minimise the soot and carbon formation and keep engine components clean throughout the entire interval between replacements;
– Natural antioxidants effectively resist ageing.Designed for the maximum protection of modern petrol and diesel engines of a wide car fleet (passenger cars, light SUVs, minibuses and light trucks) from Russian, European and other manufacturers.
The oil is not suitable for use in heavy trucks and similar vehicles! -
$111.00
MANNOL Scheiben Reiniger 1:100 is a highly efficient super – concentrated summer wiper for use in the washer tank.
Properties:
– Effectively removes dirt, insects, oil stains, silicone film and other heavy dirt from windows and headlights;
– Quickly provides transparency of the windscreen, increasing driving safety;
– Has a pleasant citrus smell
– Does not leave stains and streaks on the glass;
– Free of phosphates, biologically neutral;
– Chemically neutral to rubbers, plastics and paint coatings.Application: dilute with water in a ratio of 1:100 (25 ml per 2.5 liters of water) and pour into the washer tank.
-
$111.00
Scheiben-Reiniger (-70 °C) is a highly efficient concentrated winter wiper for use in the washer tank.
Properties:
– Effectively removes dirt, road de-icing agents, oil stains, silicone film and other heavy dirt from windows and headlights;
– Guaranteed to remove ice down to -70 °C;
– Quickly and easily provides transparency of the windscreen, increasing driving safety. Suitable for all types of windshields: triplex, securiflex, etc. with or without heating, as well as for rear and side windows (tempered glass) and headlights made of any material;
– Has a pleasant citrus smell
– Does not leave stains and streaks on the glass;
– Free of phosphates, biologically neutral;
– Chemically neutral to rubbers, plastics and paint coatings.Application: dilute with water in a ratio of 1:1 (1 liter of product per 1 liter of water), while the solution will work down to – 20 °C, and pour into the washer tank. When diluted 1:2 (1 liter of the product per 2 liters of water), the solution will remain functional down to – 10 °C. It can be used in a concentrated form.
-
$111.00
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns.
Application:
Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off. -
$111.00
Highly foaming shampoo concentrate with the highest washing and cleaning action for manual contact car wash.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dusty fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has the smell of sea breeze;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.Compatibility: Safe for paint surfaces, plastics and rubber products.
Application: Remove in advance large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20, depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede. -
$111.00
-
$111.00
Code : MN7901
Specifications : SAE 0W-40 / 0W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : ACEA A3/B4 / BMW LL-04 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / MB 229.5 / MB 229.3 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / GM LL-A-025 / GM LL-B-025 / FIAT 9.55535-M2 / FORD WSS-M2C937-A / CHRYSLER MS-10725 / CHRYSLER MS-12633 / Additional_Recommended_Applications for AMG
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines. Designed in accordance with the requirements of German automakers.
Product properties:
– A unique bi-synthetic (PAO + esters) base with an expanded range of viscous and temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as at increased load (when driving on the road, uphill, with a trailer, maximum load) and at high ambient temperatures:
– Due to its excellent washing-dispersing properties and the highest thermal-oxidative stability, it effectively fights against all types of deposits and keeps engine parts and turbochargers clean throughout the entire interval between replacements;
– Low viscosity bi-synthetic base (PAO + esters) and a highly effective additive package provide reliable cold start in the most severe conditions, which significantly reduces engine starting wear;
– Due to the exceptional strength of the oil film created by the ester components, it has excellent anti-seize, anti-wear and anti-friction properties, which allows to save fuel and, combined with excellent pumpability, significantly increase engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel.
Designed for gasoline and diesel engines (with and without turbocharging) a wide fleet of cars (cars, light SUVs, minibuses and light trucks of European and other manufacturers), where the performance level of API SN / CH-4 and lower, as well as ACEA A3/B4.
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN3002
Specifications : SAE J1703/J1704 / ISO 4925 / FMVSS 116 DOT 4 / JIS JAPAN K2233
Recommendation / OEM Approval :
Product Details
Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors. Designed for hydraulic systems of all traditional brake devices and clutches.
Product properties:
– Contains boric acid, which completely neutralizes water condensate;
– Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C);
– Has the highest chemical and thermal stability;
– Offers excellent lubricity and viscosity-temperature properties;
– Neutralizes the formation of vapour bubbles;
– Compatible with elastomers;
– Entirely inactive for the parts of the brake system.
Aggressive to paintwork.
Follow the manufacturer’s instructions in the instruction manual!
Color: colorless / light brown.
Code : MN7915
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : MB 229.5 / MB 229.3 / MB 226.5 / JASO MA2 / VOLKSWAGEN 502.00 / VOLKSWAGEN 505.00 / PORSCHE A40 / RENAULT RN0710 / RENAULT RN0700 / BMW LL-01 / BMW LL-98 / PSA B71 2296 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative universal ester-containing premium motor oil for modern gasoline and diesel engines with and without turbocharging, including “old” brands and high mileage. Designed based on the requirements of European producers.
Product properties:
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Applicable to 4T wet clutch motorcycle engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in the engines of Daimler, VW, Opel, GM, Renault vehicles imposing additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7715
Specifications : SAE 5W-30 / 5W30 / API SN / ACEA C3
Recommendation / OEM Approval : MB 229.51 / VOLKSWAGEN TL 52 195 / BMW Longlife-04 / PORSCHE C30 / VOLKSWAGEN 504 00 Approval / VOLKSWAGEN 507 00 Approval
Product Details
Innovative universal premium bi-synthetic engine oil (PAO-based) for modern petrol and diesel engines of VW group cars (including direct injection) with and without turbocharging, including those equipped with pump-injectors (Pumpe-Düse).
Product properties:
– Due to the ester components contained, it has excellent anti-wear, extreme pressure and anti-friction properties, which ensures long and trouble-free operation of the pump-nozzle system and the entire gas distribution mechanism, reducing cam wear;
– Due to its excellent detergent-dispersing properties and high thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– Saves fuel due to optimal anti-friction properties;
– Ester components together with the bi-synthetic base provide a low solidification temperature (-45 °C and below) and guarantee easy low-temperature engine start-up due to exceptional turn ability and pump ability, which significantly reduces engine starting wear;
– It has optimal viscosity over a wide temperature range, which ensures stable operation in all operating modes, including in urban mode and under overload conditions;
– Due to its high thermal-oxidative stability, it effectively resists aging;
– Compatible with all exhaust gas neutralization systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Suitable for engines running on liquefied natural gas (LNG) and petroleum gas (LPG).
Designed for gasoline and diesel engines of EURO IV and EURO V wide fleet of vehicles (cars, light SUVs, vans and light trucks) of VW imposes additional requirements on motor oils in accordance with the specifications 504.00/507.00 and previous.
The oil is not suitable for use in heavy trucks and similar vehicles!
Innovative engine protection agent based on synthetic compound ethers – esters (group V oils) and hexagonal boron nitride microparticles h-BN (white graphite) – anti-wear and anti-friction additive for engine oils without oil bath clutches (friction clutches). It is suitable for all types of engines – diesel and petrol, four-stroke and two-stroke and for all types of oils – mineral, semi-synthetic, synthetic, including those containing ether (ester). Ideal product for tuning and high-performance cars.
It is a stable suspension of graphite-like micro powder in ether.
Ether molecules in the additive are magnetically bound to metal surfaces due to their distinct polarity and form a dense and very stable oil film, while ceramic microparticles smooth out any unevenness of friction surfaces and effectively dissipate heat. This prevents direct contact of metal surfaces and wear of separate parts even under the most extreme operating conditions. Dry friction during cold starts, especially at sub-zero temperatures, is prevented, thus minimising wear during engine start-up.
The boundary layer that forms when the product is applied has the following properties:
– extreme pressure resistance – allowing the engine and/or transmission to operate at increased loads without negative consequences;
– excellent anti-wear and anti-friction properties, which significantly increases the life of the engine and/or transmission unit and significantly reduces fuel consumption and engine noise;
– anti-corrosive and anti-oxidant properties.
The additive gives the oil the following properties:
– it prevents dry friction;
– it reduces evaporation, decreases CO2 emissions and prolongs oil life;
– it improves the thermal-oxidative stability, which increases the resistance to ageing and degradation, thus extending the oil change intervals;
– improves low-temperature properties, making cold starts much easier;
– improves detergent and dispersion properties, preventing deposits of varnish, resins and sludge, which increases the life of the engine and/or transmission and the oil itself.
Compatibility:
– Compatible with all materials, particulate and finest oil filters (for fine filtration): the particle size (no more than 0.5 μm) ensures their free passage through all filters and prevents deposits;
– Compatible with catalytic converters, all types of turbochargers and all injection systems including common rail.
Application: Shake and add to the oil at a ratio of 300 ml per 5 L.
Attention! Not suitable for use in equipment with oil bath clutches (friction clutches).
Code : MN7908
Specifications : SAE 5W-30 / 5W30 / API SN/CH-4 / ACEA C2 / ACEA C3
Recommendation / OEM Approval : VOLKSWAGEN 505.01 / BMW LL-04 / MB 229.52 / MB 229.31 / MB 226.5 / GM dexos2 / RENAULT RN0700 / RENAULT RN0710 / MB Approval 229.51
Product Details
Innovative, versatile, all-synthetic ester-containing premium synthetic engine oil for modern diesel and gas turbocharged and non-turbocharged engines. Designed in accordance with the requirements of European automakers.
Product properties:
– High fuel efficiency due to optimal antifriction properties;
– Highly effective additive package and synthetic base provide confident cold start in any conditions, thereby significantly reducing engine starting wear;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– The presence of ester components in combination with optimal viscosity-temperature characteristics guarantees the highest strength of the oil film, which provides excellent anti-wear properties which, combined with excellent pumpability, significantly increase engine life even in the most severe operating conditions;
– Compatible with all exhaust gas aftertreatment systems;
– Suitable for engines using liquefied natural gas (LNG) and liquefied petroleum (LPG) gas;
– It is applied in engines with the extended interval of replacement of oil (Long Life) to 40 000 km and ordinary.
Designed for gasoline and diesel engines in a wide fleet of cars, light SUVs, minibuses and light trucks of European and other manufacturers, where the performance level of ACEA C3 is required.
Due to its versatility, it is especially recommended for taxi fleets.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : AD3001
Specifications : DIN 70070 / ISO 22241-1 / ISO 22241-2 / ISO 22241-3
Recommendation / OEM Approval :
Product Details
AdBlue® is a high-purity 32,5 % w/w urea solution which is used as an additional working fluid in diesel cars and trucks equipped with SCR technology (Selective Catalytic Reduction). The composition of AdBlue® is specified in DIN 70070. The use of such systems optimises engine performance, reduces the emission of harmful particles in exhaust gases and complies with the environmental standards Euro 4, Euro 5 and Euro 6.
AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA Verband der Automobilindustrie e.V.).
The Latest development – a lubricating additive in gasoline. It is intended for all types of fuel systems of gasoline engines, first of all – for engines with direct fuel injection into cylinders. In diesel engines, such a power system was introduced earlier and showed its effectiveness, but also found a number of problems related to the lack of quality of lubrication of moving metal parts of the fuel system, and especially the high pressure fuel pump. We present a multifunctional complex for gasoline fuel. This balanced package of additives meets the most modern requirements, is compatible with any gasoline fuel, is easily mixed with it and completely dissolves, and is guaranteed to improve any commercial gasoline fuel, even if it contains ethanol, giving it best consumer properties, transferring it to the rank of the so-called "brand" fuel. When testing the lubricity of commercial gasoline AI-95, a more than twofold decrease in the diameter of the wear spot was recorded when only 0.1% of the additive was introduced into the fuel (1 liter of additive per 1000 liters of gasoline). In addition, the additive has a friction modifier and an ignition promoter, which increases the completeness of fuel combustion and reduces the formation of carbon deposits in the combustion chamber. With regular use of the additive, engine performance improves and significant fuel savings occur (2-5%)
Properties:
– Guaranteed to improve the lubricity of gasoline, protects the entire fuel system and its individual elements from corrosion, especially: all types of injectors, carburetor jets, fuel pumps, intake valves and the combustion chamber, prevents excessive fuel and oil consumption;
– All other things being equal, it increases the engine power and acceleration of the car, including by improving the lubricating properties of gasoline, reducing friction in the cylinder zones and ensuring optimal fuel dispersion;
– Reducing carbon formation, smoke and toxicity, increases the life of spark plugs, oxygen sensors, catalysts, injectors (injectors) and the engine as a whole;
– Forms a stable oil film on the parts of the fuel system, which prevents their corrosion;
– The strong and stable oil film formed when using Benzin Ester Additive significantly reduces the wear of all rubbing pairs of the fuel system, thereby increasing its service life, and also reduces the wear of cylinders, pistons and piston rings;
– Eliminates problems with starting, restores the uniformity of idle speed and reduces detonation;
– A clean engine uses less fuel and emits less harmful substances;
– Compatible with all exhaust gas and turbocharging systems;
– Compatible with all construction materials;
– Recommended for preserving the engine when it is idle for a long time.
Application: Add to the tank in the ratio of 50 ml per 50 liters of fuel.
Recommended for regular use.
Shelf life: 5 years from the date of production.
Diesel fuel additive for cleaning and regeneration of all types of Diesel Particulate Filters (DPF) without dismantling and disassembling. Suitable for all types of diesel fuel and for all types of diesel engines equipped and not equipped with automatic DPF regeneration systems. Especially recommended for cars operating in the city (in traffic jams) and / or when using low quality fuel.
Regular use helps to restore the DPF to factory settings.
Product properties:
– Reduces the ignition temperature of soot in DPF, thereby accelerating and facilitating the process of its afterburning at all engine operating modes, and especially in urban mode, thereby extending the filter life and reducing the cost of operating the car;
– Increases the completeness of fuel combustion, thereby reducing its consumption, all other things being equal;
– By increasing the completeness of combustion, it increases power and reduces soot formation and toxicity of exhaust gases. It can be used to prevent clogging of the particulate filter.
Application: Add to the tank before refueling in the ratio of 400 ml to 60 liters of fuel. Use every 2000 km.
Recommended for regular use.
