-
$111.00
Cable ties are made with type 6/6 nylon for high impact and tensile strength. They are self extinguishing -UL 94 Flam. Class V2 and non-corrosive. Operating temperature from -40°F to 185°F (-40°C to 80°C). Heat stabilized from -40°F to 221°F (-40° to 105°C)
-
$111.00
Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heights of 47-90 cm.
-
$111.00
Code : MN7721
Specifications : SAE 0W-20 / 0W20 / API SP (RC) / ILSAC GF-6A
Recommendation / OEM Approval : HONDA HTO-06 / GM dexos1 Gen2 / GM 6094M / CHRYSLER MS-6395 / CHRYSLER MS-13340 / JAGUAR LAND ROVER STJLR.51.5122 / FIAT 9.55535-CR1 / FORD WSS-M2C947-A / FORD WSS-M2C947-B1 / INFINITI / LEXUS / MAZDA / SUZUKI
Product Details
Premium synthese engine oil, specially developed for all types of modern gasoline engines.
Product properties:
– Low viscous bi-synthetic (PAO + esters) base and a highly effective additive package provide reliable cold start in the most severe conditions, thereby significantly reducing engine starting wear;
– Exceptional fuel economy due to reduced high-temperature viscosity HTHS and optimal anti-friction properties;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear properties due to the exceptional strength of the oil film, which, combined with excellent pump ability, significantly increases engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life) and conventional. -
$111.00
Code : MN7204
Specifications : API TC / JASO FD / ISO L-EGD / TISI
Recommendation / OEM Approval : HUSQVARNA 242 Chainsaw
Product Details
A universal high-quality synthetic-based engine oil for modern high-load and high-speed 2-stroke engines with air and liquid cooling. It is suitable for the lubrication by a pre-mixed blend and an automatic mixing in an engine intake.
Product properties:
– A modern additive package and a synthetic base ensure a stable operation of the engine in any operating conditions, including high temperatures and loads, prevent the formation of carbon deposits, lacquer and soot on combustion chamber walls, pistons, plugs, valves, an exhaust manifold and exhaust pipe, prevent piston rings from sticking and gumming up thus extending the service life of the engine;
– A special oil formula ensures a full and smokeless combustion and prevents preignition;
– Special ashless detergent additives maintain the engine parts clean;
– It instantly forms a highly stable mixture with all types of fuel even at low temperatures;
– It has excellent anticorrosion, antiwear and antifriction properties, prevents wear and scuffing on cylinder walls even under extreme loads;
– It is suitable for motorsports.It is designed for use in all types of modern 2-stroke engines: motorcycles, mopeds, scooters, motor scooters and other two-wheeled motor vehicles with the required oil level of API TC and JASO FD.
The fuel-oil mixture ratio recommended by engine manufacturers must be observed. In the absence of it – the recommended ratio is 1:50.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine!
It is dyed red for the visual control of the oil in the mixture. -
$111.00
Code : MN7201
Specifications : API TC+ / JASO FD / ISO L-EGD
Recommendation / OEM Approval : BRP ROTAX 253 Snowmobile / BOMBARDIER / SKI DOO / LYNX / ARCTIC CAT / POLARIS / YAMAHA
Product Details
A unique synthetic engine oil for 2-stroke engines with air and liquid cooling operating at low temperatures with various fuel and oil mixing (input) systems (with both a separate oil input and lubrication by a fuel-oil mixture). It was developed in compliance with heightened requirements for last-generation engines.
Product properties:
– A special oil formula ensures a complete combustion and prevents preignition;
– Due to a low freezing temperature (-30°C), it ensures a reliable cold start;
– The modern additive package and the synthetic base ensure a stable operation of the engine in any operating conditions, including high operating temperatures and loads, prevent the formation of carbon deposits and lacquer on pistons, plugs, combustion chamber walls, valves and nozzles, prevent piston rings from sticking thus extending the service life of the engine;
– Smokeless combustion;
– Special ashless detergent components maintain the excellent cleanliness of the engine parts;
– It contains a hydrocarbon mixing agent that facilitates an instant formation of a stable fuel-oil mixture in freezing weather. It instantly forms a highly stable mixture with all types of fuel. It is self-mixing;
– It has excellent anticorrosion, antiwear and antifriction properties thus extending the service life of the engine;
– It withstands sport loads.It is designed for two-stroke engines of snowmobiles, utility terrain vehicles, ATVs, scooters and other off-road equipment operating in cold weather whose required oil grade is API TC+ or JASO FD.
The fuel-oil mixture ratio recommended by engine manufacturers must be observed. In the absence of it – the recommended ratio is 1:50.
Comply with the manufacturer’s instructions provided in the user’s manual of the equipment!
It is dyed red for the visual control of the oil in the mixture. -
$111.00
Code : MN7205
Specifications : API TC / JASO FB / ISO L-EGB
Recommendation / OEM Approval :
Product Details
A universal high-quality mineral-based engine oil for modern high-load and high-speed 2-stroke engines with air cooling. It is suitable for the lubrication by a pre-mixed blend and an automatic mixing in an engine intake.
Product properties:
– A modern additive package and a synthetic highly-purified base ensure a stable operation of the engine in any operating conditions, including high temperatures and loads, prevent the formation of carbon deposits, lacquer and soot on combustion chamber walls, pistons, plugs, valves, an exhaust manifold and exhaust pipe, prevent piston rings from sticking and gumming up thus extending the service life of the engine;
– A special oil formula ensures a smokeless combustion and prevents preignition;
– Special detergent components maintain the engine parts clean;
– It instantly forms a highly stable mixture with all types of fuel even at low temperatures;
– It has excellent anticorrosion, antiwear and antifriction properties, prevents wear and scuffing on cylinder walls even under extreme loads.It is designed for all types of 2-stroke engines: motorcycles, mopeds, scooters, motor scooters and other two-wheeled motor vehicles with the required oil grade of API TC and JASO FB.
The fuel-oil mixture ratio recommended by engine manufacturers must be observed. In the absence of it – the recommended ratio is 1:50.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine!
It is dyed green for the visual control of the oil in the mixture. -
$111.00
2K-Acryl Fixed Bond is a universal two-component acrylic adhesive for fast and strong bonding of surfaces made of any metals and alloys (steel, stainless steel, cast iron, aluminum, copper, brass, bronze, magnesium, tin, lead, titanium, etc.) and any plastics (including PVC, ABS, nylon, polycarbonate, plexiglass, polyester resins, polyurethane), as well as ceramics, porcelain, rubber, wood with minimal surface preparation. It can be used both in the repair of cars and other equipment, and in industry, at home and in the office, for furniture repair, etc.
It is used for filling cracks, cavities and potholes, incorrectly drilled holes, repairing damaged threads both internal and external, as well as putty for restoring and leveling flat surfaces.Properties:
– High adhesion strength (shear and tear), and high impact resistance;
– High resistance to aging, oxidation, high and low temperatures. Heat resistance up to 110 °C;
– Resistance to acids, alkalis, water, oil, gasoline;
– Resistant to UV radiation and weather factors, so it is particularly suitable for outdoor use;
– After final solidification, any mechanical processing with chip removal is possible (drilling, sawing, threading, sanding, etc.), and then painting or varnishing;
– No dripping or leaking;
– Perfectly transparent, clean seam (without air bubbles);
– Good adhesion to oiled surfaces.Application:
Thoroughly clean the surfaces to be bonded from old paint and other coatings, dirt, grease and oil deposits. Degrease using 9691 MANNOL Brake Cleaner. Dry. Bonding can be performed at any temperature and humidity, but the optimal temperature is from +10°C to +30 °C and humidity of 50-60%. Squeeze the glue out of the double syringe and mix the two components thoroughly. Apply the adhesive to the surface to be treated and squeeze the parts to be bonded. Hardens within 5 minutes. Complete solidification occurs in 24 hours. -
$111.00
MANNOL 2K-PUR is a two-component polyurethane-based adhesive for reliable bonding and cosmetic repair of various surfaces and parts and especially for repairing leaks and cracks. Quickly and reliably bonds parts made of all plastics and all metals and alloys in any combination. Suitable for concrete, stone and wood. Ideal for quick repairs with long-lasting effects, e.g. for filling cracks and cavities on surfaces of all shapes. Can be used in the repair of vehicles and other machinery as well as in industry, everyday life and offices.
Properties:
– Cures completely in 20-30 minutes at room temperature, after which any mechanical processing is possible;
– After curing it has exceptional elasticity and high durability, which it retains for a long time;
– Has very high adhesive properties;
– Does not change volume during curing – i.e. does not shrink;
– Does not contain water and solvents, is odourless;
– Thixotropic: When applied, it does not run without external influences;
– Absolutely resistant to water, mould and fungal micro-organisms, oil products;
– Resistant to weather influences and ageing. Withstands temperatures from -60 °C to +120 °C.Application:
1. Thoroughly clean the surfaces to be bonded of old paint and other coatings, dirt, grease and oil deposits. Remove burrs on the front side with a file and shape the pierced surface evenly forming a chamfer. Grind the damaged area with sandpaper within a radius of 5-7 cm around the perimeter of the piercing or the cracks.
2. Degrease using 9691 MANNOL Brake Cleaner. Roughen the surfaces for best results. Allow to dry.
3. Apply an appropriately sized mesh to the inside of the hole or crack to be treated, overlapping the edges of the hole by at least 5 cm. For large holes it is recommended to apply a second layer of mesh, additionally overlapping the first layer by 50 %. On the front side, apply the foil supplied with the kit to the surface to be treated.
Bonding can take place at any temperature and humidity conditions, however a temperature of +10 to +30 °C and a humidity of 50-60 % is optimal.
4. Squeeze out the required quantity of the two components from the double syringe and mix well. The mixing ratio is 1:1. Apply the mixture on the inner side of the reinforcing mesh over the entire treated surface. Smooth out the applied layer with a trowel, taking care not to apply excessive force to avoid squeezing the compound onto the front side.
5. After 10 minutes, remove the foil from the front side, allow the compound to harden and apply MANNOL Epoxy-Plastic 9904 to the treated surface in preparation for further painting.Setting time 4-6 minutes after mixing. After 8-10 minutes the adhesive is already resistant to deformation. Complete curing takes 20-30 minutes, depending on the surrounding temperature. Do not apply the product at temperatures below 0 °C. Store tightly closed in the original packaging in a cool, dry place at temperatures between +5 °C and +25 °C.
-
$111.00
Code : MN7203
Specifications : SAE 30 / API SG / JASO MA/MA2
Recommendation / OEM Approval :
Product Details
A high-quality mineral engine oil for modern small 4-stroke engines of gardening equipment.
Product properties:
– It has an increased resistance to oxidation and high temperatures, at which it preserves its strong oil film. It ensures cold starts during the winter;
– It preserves stable viscous properties during operation;
– A modern additive package and a highly-purified base ensure a stable operation of the engine in any operating conditions, including high temperatures and loads, prevent the formation of carbon deposits and lacquer on injectors, pistons, plugs, valves, nozzles and deposits in the engine case thus extending the service life of the engine;
– Special detergent-dispersion additives maintain the ideal cleanliness of the engine parts;
– It has excellent antifoam properties;
– High-performance reaction inhibitors ensure excellent anticorrosion properties;
– Special additives and a high-viscosity base ensure excellent antiwear and antifriction properties that reduce the fuel consumption and enhance the engine power;
– It may be mixed with analogous mineral and synthetic oils;
– It is compatible with all types of catalyst converters, has an extended replacement age.It is designed for gardening equipment equipped with petrol-powered 4-stroke engines with air and liquid cooling: lawn-mowers, power cultivators, mini tractors, generators, powered pumps, etc.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age! -
$111.00
Code : MN7820
Specifications : SAE 10W-40 / 10W40 / JASO MA2 / JNMMA FC-W
Recommendation / OEM Approval : API SL / BRP ROTAX / HONDA / KAWASAKI / POLARIS / SEA DOO / SUZUKI / YAMAHA
Product Details
A high-quality synthetic-based engine oil for modern 4-stroke engines of sport and tourist jet skis with and without a turbocharger, it is recommended for use under increased loads and high ambient temperatures.
Product properties:
– A modern additive package ensures a stable operation of the lubrication system of high-load water jet propellers;
– It has an increased resistance to oxidation and high temperatures, at which it preserves its strong a film and good flow characteristics at low temperatures that facilitate cold starts;
– Due to a high viscosity index, it preserves stable viscous properties during operation.
– A modern additive package and a synthetic base ensure a stable operation of the engine in any operating conditions, including high temperatures and loads, prevent the formation of carbon deposits and lacquer on injectors, pistons, plugs, valves and nozzles and deposits in the engine case thus extending the service life of the engine;
– It prevents the formation of the emulsion with water, it preserves high operating properties in the conditions of a contamination by sea water or fuel;
– Special detergent-dispersion additives maintain the ideal cleanliness of the engine parts;
– It has excellent antifoam properties during the oil circulation;
– Special inhibitors prevent the corrosion caused by the sea water and salt spray, as well as an aggressive environmental impact during the seasonal storage;
– Due to its stable high-viscosity synthetic base, it has excellent antiwear and antifriction properties that reduce the fuel consumption;
– It is compatible with all types of catalyst converters, has an extended replacement age.It is designed for all types of 4-stroke engines, installed on water vehicles operated on both fresh and salt water.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine! -
$111.00
Code : MN7812
Specifications : SAE 10W-40 / 10W40 / API SL / JASO MA/MA2
Recommendation / OEM Approval : HONDA / HUSABERG / KAWASAKI / SUZUKI / YAMAHA
Product Details
An innovative synthetic ester-containing engine oil for 4-stroke high-load engines of motorcycles, pit bikes, motards, etc. for off-road (enduro, motocross, trials, etc.) and highway (stuntriding, supermoto, etc.) driving under extreme loads. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and a synthetic base ensure a high traction coefficient in friction elements that allow avoiding their wear due to the prevention of skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and driving at a constant speed thus allowing an easy gear shift;
– Due to its ester-containing base, it has superior lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder-piston group and a valve gear;
– It was created with an exceptionally stable ester-containing synthetic base and it was designed for extreme operating conditions, it has a superior thermo-oxidative stability and resistance to high temperatures at which it preserves an exceptionally strong oil film;
– Due to a high viscosity index, it preserves stable viscous properties at any operating conditions, including high sliding velocities. It ensures exceptionally easy cold starts during winter;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties and a low evaporation capacity;
– High-performance inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous synthetic oils;
– It is compatible with all exhaust control systems.It is designed for petrol-powered 4-stroke engines of motorcycles of all types, all-terrain vehicles (quadricycles), scooters and motor scooters with air and liquid cooling with or without an integrated gearbox, oil bath clutch coupling and “dry” clutch and other two-wheeled vehicles with and without catalytic converters that require operating properties to be of API SL or lower and JASO MA/MA2 level. It is ideal for injection engines.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age! -
$111.00
Code : MN7830
Specifications : SAE 20W-50 / API SL / JASO MA/MA2
Recommendation / OEM Approval :
Product Details
A universal all-season synthetic-based engine oil for 4-stroke normal- and high-load engines (including 2-cylinder V-type) for highway, off-road and racing motorcycles. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and a high-viscosity base ensure a high traction coefficient in friction elements that allow avoiding their wear due to the prevention of skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and driving at a constant speed thus allowing an easy gear shift;
– It has excellent lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder-piston group and a valve gear;
– It was created with a stable high-viscosity base and designed for extreme operating conditions, it has a good thermo-oxidative stability and resistance to high temperatures at which it preserves an exceptionally strong oil film;
– It preserves stable viscous properties at any operating conditions, including high sliding velocities. It ensures cold starts during winter;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties and a low evaporation capacity;
– High-performance inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous mineral and synthetic oils.It is designed for petrol-powered 4-stroke engines of motorcycles of all types with air and liquid cooling with or without an integrated gearbox, oil bath clutch coupling and “dry” clutch and other two-wheeled vehicles with the required operating properties of API SL or lower and JASO MA/MA2 level.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age! -
$111.00
Code : MN7202
Specifications : SAE 10W-40 / 10W40 / API SL / JASO MA/MA2
Recommendation / OEM Approval :
Product Details
A high-quality ester-containing synthetic-based engine oil for modern 4-stroke engines of two-wheeled vehicles with and without an integrated gearbox and with an oil bath clutch, with air and liquid cooling. It may be used in engines with a dry type clutch. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and synthetic components ensure a high traction coefficient in friction elements that allow avoiding their wear at the expense of avoiding the skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and driving at a constant speed thus allowing an easy gear shift;
– Due to the contained esters it has excellent lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder walls;
– It has an increased thermal oxidation stability and resistance to high temperatures, at which it preserves a strong oil film. It ensures easy cold starts during winter;
– Due to a high viscosity index, it preserves stable viscous properties in any operating conditions;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties;
– High-performance reaction inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous mineral and synthetic oils.It was designed for petrol-powered 4-stroke engines of highway and off-road vehicles, mopeds, all-terrain vehicles, ATVs, scooters and other two-wheeled vehicles with a “wet” clutch without catalytic convectors.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age! -
$111.00
Code : MN7832
Specifications : SAE 15W-50 / 15W50 / API SM / JASO MA/MA2
Recommendation / OEM Approval : DUCATI / HONDA / KAWASAKI / SUZUKI / YAMAHA
Product Details
An innovative synthetic ester-containing engine oil for 4-stroke high-load engines of motorcycles, pit bikes, motards, etc. for off-road (enduro, motocross, trials, etc.) and highway (stuntriding, supermoto, etc.) driving under extreme loads. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and a synthetic base ensure a high traction coefficient in friction elements that allow avoiding their wear due to the prevention of skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and movement at a constant speed thus allowing an easy gear shift;
– Due to its ester-containing base, it has superior lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder-piston group and a valve gear;
– It was created with an exceptionally stable ester-containing synthetic base and designed for extreme operating conditions, it has a superior thermo-oxidative stability and resistance to high temperatures at which it preserves an exceptionally strong oil film;
– It preserves stable viscous properties in any operating conditions, including high sliding velocities. It ensures cold starts during winter;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties and a low evaporation capacity;
– High-performance inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous synthetic oils;
– It is compatible with all exhaust control systems.It is designed for petrol-powered 4-stroke engines of motorcycles of all types, all-terrain vehicles (quadricycles), scooters and motor scooters with air and liquid cooling with or without an integrated gearbox, oil bath clutch coupling and “dry” clutch and other two-wheeled vehicles with and without catalytic converters that are in compliance with Euro I, II, III requirements when the required operating properties are of API SM or lower and JASO MA/MA2 level. It is ideal for injection engines. It is recommended for particular DUCATI engines that require oil with the viscosity class 15W-50.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age! -
$111.00
Code : MN7209
Specifications : SAE 20W-40 / API SN / JASO MA2
Recommendation / OEM Approval :
Product Details
A high-quality synthetic-based engine oil for modern 4-stroke engines of two-wheeled vehicles with and without an integrated gearbox and with an oil bath clutch, with air and liquid cooling. It may be used in engines with a dry type clutch. It was designed for a guaranteed protection of the engine and the durability of the gearbox.
Product properties:
– A special additive package and synthetic components ensure a high traction coefficient in friction elements that allow avoiding their wear due to the prevention of skidding and ensure an exact and smooth operation of the clutch during starting, acceleration and driving at a constant speed thus allowing an easy gear shift;
– It has excellent lubricating, antiwear and anti-scuffing properties that reduce fuel consumption, improve the power and service life of the engine. It provides a maximum wear protection of cylinder walls and a valve gear;
– It has an increased thermal oxidation stability and resistance to high temperatures, at which it preserves a strong oil film;
– Due to a high viscosity index, it preserves stable viscous properties in any operating conditions;
– Special detergent-dispersion additives maintain the engine parts ideally clean;
– It has excellent antifoam properties;
– High-performance inhibitors ensure excellent anticorrosion properties;
– It may be mixed with analogous mineral and synthetic oils;
– An optimal sulphur and phosphor content ensures favourable conditions for the functioning of catalytic converters.It was designed for petrol-powered 4-stroke engines of highway and off-road vehicles, mopeds, all-terrain vehicles (quadricycles), scooters and other two-wheeled vehicles with a “wet” clutch equipped with catalytic converters.
Comply with the manufacturer’s instructions provided in the user’s manual of the engine, especially the oil replacement age! -
$111.00
MANNOL Acryl Paint Black – quick-drying black matte paint for painting various surfaces of the car, made almost from any materials. It is created on the basis of synthetic acrylic resins. It is also intended for painting, decorative design and repair of small objects and household products, elements of landscape and interior design that are not subjected to mechanical loads.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Forms a coating with high performance characteristics, which has good hardness, light resistance (retains color and does not fade in the sun), hiding power, resistance to environmental influences, washing and wet cleaning with non-abrasive detergents. It does not age, can withstand temperatures within 180° C, is inert to oils, fuels, acids, alkalis, thermoplastic and water-resistant;
The coating is a homogeneous, with no craters, pores, wrinkle and foreign inclusions of the surface. The color of the coating must be within the tolerance limits set by the RAL catalog;
– Has excellent adhesive properties-forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Perfectly combined with many types of primers;
– Does not contain ozone-depleting substances and heavy metal compounds;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.Application:
Suitable for painting MANNOL Acryl Paint Black: metal surfaces, including those previously painted with powder paints (external walls of refrigerators, washing machines, microwave ovens, etc.); any plastic surfaces; natural dense fabrics (posters, clothing items); dense mineral surfaces: concrete, brick, plastered (except for facades), plasterboard, artificial and natural stone, unglazed ceramics, crushed stone, etc., used in atmospheric conditions and indoors. It can be used for painting and decorating wood products (furniture elements, photo frames, windows, doors, etc., except for floors) and glass used indoors.
The surface to be painted must be thoroughly cleaned of grease and other contaminants, rust, scale, old peeling paint, sanded, degreased with a solvent, we recommend the MANNOL Brake Cleaner 9691 degreaser, and dried. To obtain a more durable coating, metal surfaces should be primed with an anti-corrosion primer. Cover areas of the surface that are not subject to painting with paper or paint tape.
The temperature of the surface to be painted must exceed by at least 3° C the dew point (the temperature at which moisture from the air condenses on a solid surface). Drying time of the coating at a temperature of (20 ± 2)° C-1 h. it is allowed to apply the second layer in 2-3 minutes.
To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved.
Paint should be done outdoors in calm weather, in industrial areas, warehouse premises in the presence of ventilation. Before applying, shake the balloon for 3 minutes after the ball knocks. Safety valves workability – when pressed, the valve should open, releasing the contents, when released to stop release of content (should not pass the content through the connection nipple head). Spray vertically in a thin layer from a distance of 25-30 cm at a temperature of 5° C to 30° C. Spray first horizontally, then after a short pause, vertically. Depending on the color, the number of layers is from 1 to 3. After the work is completed, clean the valve: to do this, turn the spray bottle down and press the valve for 2-5 seconds.
A single bottle can be paint up to 2 m² of even surface. It depends on the type, quality and preparation of the surface to be painted, climate factors, color and skills of the worker. If necessary, apply a special transparent varnish over the paint.
Code : MN7715
Specifications : SAE 5W-30 / 5W30 / API SN / ACEA C3
Recommendation / OEM Approval : MB 229.51 / VOLKSWAGEN TL 52 195 / BMW Longlife-04 / PORSCHE C30 / VOLKSWAGEN 504 00 Approval / VOLKSWAGEN 507 00 Approval
Product Details
Innovative universal premium bi-synthetic engine oil (PAO-based) for modern petrol and diesel engines of VW group cars (including direct injection) with and without turbocharging, including those equipped with pump-injectors (Pumpe-Düse).
Product properties:
– Due to the ester components contained, it has excellent anti-wear, extreme pressure and anti-friction properties, which ensures long and trouble-free operation of the pump-nozzle system and the entire gas distribution mechanism, reducing cam wear;
– Due to its excellent detergent-dispersing properties and high thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– Saves fuel due to optimal anti-friction properties;
– Ester components together with the bi-synthetic base provide a low solidification temperature (-45 °C and below) and guarantee easy low-temperature engine start-up due to exceptional turn ability and pump ability, which significantly reduces engine starting wear;
– It has optimal viscosity over a wide temperature range, which ensures stable operation in all operating modes, including in urban mode and under overload conditions;
– Due to its high thermal-oxidative stability, it effectively resists aging;
– Compatible with all exhaust gas neutralization systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Suitable for engines running on liquefied natural gas (LNG) and petroleum gas (LPG).
Designed for gasoline and diesel engines of EURO IV and EURO V wide fleet of vehicles (cars, light SUVs, vans and light trucks) of VW imposes additional requirements on motor oils in accordance with the specifications 504.00/507.00 and previous.
The oil is not suitable for use in heavy trucks and similar vehicles!
Diesel fuel additive for cleaning and regeneration of all types of Diesel Particulate Filters (DPF) without dismantling and disassembling. Suitable for all types of diesel fuel and for all types of diesel engines equipped and not equipped with automatic DPF regeneration systems. Especially recommended for cars operating in the city (in traffic jams) and / or when using low quality fuel.
Regular use helps to restore the DPF to factory settings.
Product properties:
– Reduces the ignition temperature of soot in DPF, thereby accelerating and facilitating the process of its afterburning at all engine operating modes, and especially in urban mode, thereby extending the filter life and reducing the cost of operating the car;
– Increases the completeness of fuel combustion, thereby reducing its consumption, all other things being equal;
– By increasing the completeness of combustion, it increases power and reduces soot formation and toxicity of exhaust gases. It can be used to prevent clogging of the particulate filter.
Application: Add to the tank before refueling in the ratio of 400 ml to 60 liters of fuel. Use every 2000 km.
Recommended for regular use.
Code : MN7921
Specifications : SAE 0W-20 / 0W20 / ACEA C5 / API SP (RC)
Recommendation / OEM Approval : MB 229.71 / BMW LL-17FE+ / VOLVO VCC RBS0-2AE (ServiceFill) / OPEL OV0401547 / GM dexos1 Gen2 / GM dexosD / HONDA HTO-06 / GM 6094M / CHRYSLER MS-6395 / CHRYSLER MS-13340 / JAGUAR STJLR.51.5122 / LAND ROVER STJLR.51.5122 / FORD WSS-M2C947-A / FORD WSS-M2C947-B1
Product Details
Innovative energy-saving, low-viscosity bi-synthetic (PAO + esters) premium engine oil for the latest models of turbocharged gasoline engines (multipoint or direct injection) with gasoline particulate filters.
Product properties:
– Due to the unique bi-synthetic base and the esters contained in it, it has excellent anti wear, antifriction and extreme pressure properties, which ensures long and trouble-free operation of all engine systems, including turbo units. Effectively protects the timing chain from wear;
– Eliminates uncontrolled premature ignition of the fuel-air mixture in engines with direct injection (Low Speed Pre Ignition or LSPI);
– Outperforms similar oils of the SN category in terms of detergent and dispersant properties and thermal-oxidative stability, effectively combats all types of deposits and keeps engine parts clean throughout the entire drain interval. Effectively protects against high-temperature deposits on the piston and turbocharger, effectively fights sludge and lacquer formation;
– Outperforms similar SN oils in terms of fuel efficiency due to their unique composition and excellent antifriction properties;
– Bi-synthetic low-viscosity PAO + Ester base guarantees easy low-temperature engine start due to exceptional cranking and pump ability, which significantly reduces engine starting wear;
– Possesses optimal viscosity in a wide temperature range (for engines in which it is recommended), which ensures their stable operation in all operating modes, including overload;
– Due to its high thermo-oxidative stability, it effectively resists aging;
– Fully compatible with all exhaust gas after treatment systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Compatible with ethanol-containing fuels;
– It is used in engines with an extended oil change interval (Long Life up to 30,000 km) and conventional ones.
Recommended for use in gasoline engines of the latest generations of European and Japanese car manufacturers, which impose additional requirements for engine oils in accordance with the above standards and specifications.
The oil is not suitable for use in heavy trucks and similar vehicles!
The Latest development – a lubricating additive in gasoline. It is intended for all types of fuel systems of gasoline engines, first of all – for engines with direct fuel injection into cylinders. In diesel engines, such a power system was introduced earlier and showed its effectiveness, but also found a number of problems related to the lack of quality of lubrication of moving metal parts of the fuel system, and especially the high pressure fuel pump. We present a multifunctional complex for gasoline fuel. This balanced package of additives meets the most modern requirements, is compatible with any gasoline fuel, is easily mixed with it and completely dissolves, and is guaranteed to improve any commercial gasoline fuel, even if it contains ethanol, giving it best consumer properties, transferring it to the rank of the so-called "brand" fuel. When testing the lubricity of commercial gasoline AI-95, a more than twofold decrease in the diameter of the wear spot was recorded when only 0.1% of the additive was introduced into the fuel (1 liter of additive per 1000 liters of gasoline). In addition, the additive has a friction modifier and an ignition promoter, which increases the completeness of fuel combustion and reduces the formation of carbon deposits in the combustion chamber. With regular use of the additive, engine performance improves and significant fuel savings occur (2-5%)
Properties:
– Guaranteed to improve the lubricity of gasoline, protects the entire fuel system and its individual elements from corrosion, especially: all types of injectors, carburetor jets, fuel pumps, intake valves and the combustion chamber, prevents excessive fuel and oil consumption;
– All other things being equal, it increases the engine power and acceleration of the car, including by improving the lubricating properties of gasoline, reducing friction in the cylinder zones and ensuring optimal fuel dispersion;
– Reducing carbon formation, smoke and toxicity, increases the life of spark plugs, oxygen sensors, catalysts, injectors (injectors) and the engine as a whole;
– Forms a stable oil film on the parts of the fuel system, which prevents their corrosion;
– The strong and stable oil film formed when using Benzin Ester Additive significantly reduces the wear of all rubbing pairs of the fuel system, thereby increasing its service life, and also reduces the wear of cylinders, pistons and piston rings;
– Eliminates problems with starting, restores the uniformity of idle speed and reduces detonation;
– A clean engine uses less fuel and emits less harmful substances;
– Compatible with all exhaust gas and turbocharging systems;
– Compatible with all construction materials;
– Recommended for preserving the engine when it is idle for a long time.
Application: Add to the tank in the ratio of 50 ml per 50 liters of fuel.
Recommended for regular use.
Shelf life: 5 years from the date of production.
Code : MN7915
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : MB 229.5 / MB 229.3 / MB 226.5 / JASO MA2 / VOLKSWAGEN 502.00 / VOLKSWAGEN 505.00 / PORSCHE A40 / RENAULT RN0710 / RENAULT RN0700 / BMW LL-01 / BMW LL-98 / PSA B71 2296 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative universal ester-containing premium motor oil for modern gasoline and diesel engines with and without turbocharging, including “old” brands and high mileage. Designed based on the requirements of European producers.
Product properties:
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Applicable to 4T wet clutch motorcycle engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in the engines of Daimler, VW, Opel, GM, Renault vehicles imposing additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : AD3001
Specifications : DIN 70070 / ISO 22241-1 / ISO 22241-2 / ISO 22241-3
Recommendation / OEM Approval :
Product Details
AdBlue® is a high-purity 32,5 % w/w urea solution which is used as an additional working fluid in diesel cars and trucks equipped with SCR technology (Selective Catalytic Reduction). The composition of AdBlue® is specified in DIN 70070. The use of such systems optimises engine performance, reduces the emission of harmful particles in exhaust gases and complies with the environmental standards Euro 4, Euro 5 and Euro 6.
AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA Verband der Automobilindustrie e.V.).
Code : MN3002
Specifications : SAE J1703/J1704 / ISO 4925 / FMVSS 116 DOT 4 / JIS JAPAN K2233
Recommendation / OEM Approval :
Product Details
Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors. Designed for hydraulic systems of all traditional brake devices and clutches.
Product properties:
– Contains boric acid, which completely neutralizes water condensate;
– Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C);
– Has the highest chemical and thermal stability;
– Offers excellent lubricity and viscosity-temperature properties;
– Neutralizes the formation of vapour bubbles;
– Compatible with elastomers;
– Entirely inactive for the parts of the brake system.
Aggressive to paintwork.
Follow the manufacturer’s instructions in the instruction manual!
Color: colorless / light brown.
Code : MN7901
Specifications : SAE 0W-40 / 0W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : ACEA A3/B4 / BMW LL-04 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / MB 229.5 / MB 229.3 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / GM LL-A-025 / GM LL-B-025 / FIAT 9.55535-M2 / FORD WSS-M2C937-A / CHRYSLER MS-10725 / CHRYSLER MS-12633 / Additional_Recommended_Applications for AMG
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines. Designed in accordance with the requirements of German automakers.
Product properties:
– A unique bi-synthetic (PAO + esters) base with an expanded range of viscous and temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as at increased load (when driving on the road, uphill, with a trailer, maximum load) and at high ambient temperatures:
– Due to its excellent washing-dispersing properties and the highest thermal-oxidative stability, it effectively fights against all types of deposits and keeps engine parts and turbochargers clean throughout the entire interval between replacements;
– Low viscosity bi-synthetic base (PAO + esters) and a highly effective additive package provide reliable cold start in the most severe conditions, which significantly reduces engine starting wear;
– Due to the exceptional strength of the oil film created by the ester components, it has excellent anti-seize, anti-wear and anti-friction properties, which allows to save fuel and, combined with excellent pumpability, significantly increase engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel.
Designed for gasoline and diesel engines (with and without turbocharging) a wide fleet of cars (cars, light SUVs, minibuses and light trucks of European and other manufacturers), where the performance level of API SN / CH-4 and lower, as well as ACEA A3/B4.
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN4112
Specifications : SAE J1034 / JASO M325
Recommendation / OEM Approval : AFNOR FRANCE NF R15-601 (except for RA) / ASTM USA D3306 / ASTM USA D4656 / ASTM USA D4985 / ASTM USA D6210 / BSI GB BS 6580:2010 / FVV GERMANY Heft R443 / KSM SOUTH KOREA 2142 / MIL BELGIUM BT-PS-606-A / MIL FRANCE DCSEA 615/C / MIL ITALY E/L-1415b / MIL SWEDEN FSD 8704 / NATO S-759 / OENORM AUSTRIA V5123 / UNE SPAIN 26-361-88/1 / ADE / ASTON MARTIN / VOLKSWAGEN TL 774 D / VOLKSWAGEN TL 774 F / BEHR / BERGEN ENGINES 2.13.01 / BMW GS 94000 / BRB BR 637 / CASE NEW HOLLAND MAT 3624 / CATERPILLAR MAK A4.05.09.01 / CHEVROLET / CLAAS / CUMMINS CES 14439 / CUMMINS CES 14603 / CUMMINS IS series N14 / DACIA 41-01-001 / 41-01-001-T / DAF 74002 / DETROIT DIESEL DFS 93K217 / FENDT / FORD WSS-M97B44-D / GREAT WALL / HITACHI / ISUZU / JAGUAR CMR 8229 / JAGUAR STJLR.651.5003 / JENBACHER TA 1000-0201 / JOHN DEERE JDM H5 / KAROSA / KOBELCO / KOMATSU 07.892 (2009) / LAND ROVER STJLR.651.5003 / LEYLAND TRUCKS DW03245403 / LIEBHERR MD1-36-130 / MACK 014 GS 17009 / MAN 324 Typ SNF / MAN B W A S / MAN B W DIESEL AG D36 5600 / MAZDA MEZ MN 121 D / MB 325.3 / MITSUBISHI MHI / MTU MTL 5048 / MWM 0199-99-2091/11
Product Details
A carboxylated (organic – OAT Organic Acid Technology) concentrated antifreeze intended for a year-round use in any modern cooling system for which the use of ethylene-glycol-based antifreeze is recommended.
It ensures a reliable protection of any cooling system.
Product properties:
– It ensures a reliable protection of metals and alloys (brass, copper, alloy-treated steel, cast iron, aluminium) from all forms of corrosion, as well as prevents a high-temperature corrosion of aluminium surfaces of modern engines. It provides sufficient anti-corrosion properties from the concentration as low as 20%;
– It has an exceptional thermal stability. It protects from deposit formation;
– It has excellent heat conductivity properties and a resistance to foam formation;
– It is neutral to inserts and hoses, compatible with all types of rubber and plastic components of a cooling system;
– It has an excellent resistance to hard water and very low corrosion inhibitor depletion rates;
– The highly effective carboxylated additive package (OAT) ensures an exceptional stability of service qualities of the antifreeze throughout the entire service life;
– It does not contain silicates, nitrates, phosphates and amines (the NAP free technology);
– It has an extended service life in cooling systems: of passenger cars – up to 250 thousand km; of commercial vehicles – up to 500 thousand km; of stationary engines – up to 6 years.
It is recommended for engines requiring enhanced heat dissipation: highly accelerated engines, engines with a turbocharger and cooling systems of modern commercial vehicles.
Colour: red.
Service life: no less than 5 years.
Comply with the manufacturer’s instructions provided in the user’s manual!
| Pour point, °C | Mix ratio, % | |
| Coolant fluid ratio | Water ratio | |
| -20 | 35 | 65 |
| -25 | 40 | 60 |
| -29 | 45 | 55 |
| -38 | 50 | 50 |
