Car care
-
$111.00
Tar Remover is a highly effective concentrated cleaner of resinous and other hard – to-remove dirt from all surfaces of cars, motorcycles and other equipment, as well as in everyday life in the form of an aerosol. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces;
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and micro cracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.Application: spray 9668 MANNOL Tar Remover on the surface to be cleaned and Leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture. -
$111.00
Textile Cleaner – a product with a pleasant smell for cleaning dirt and grease stains on the surfaces of car seats, carpets and upholstered furniture with moisture-resistant upholstery. Neutral to fabrics and carpets.
Application: spray the product evenly on the surface to be treated from a distance of 10-15 cm, rub it with a sponge or brush, and then rinse. In case of heavy contamination, rub in the product more intensively by adding a dose, or repeat the process.
-
$111.00
Textile Foam is a highly effective foam cleaner for textiles. Removes various dirt from textile elements of the car interior (seats, doors, etc.), furniture upholstery, carpets, fabrics, etc.)
Properties:
– Returns the natural color, restores the original appearance of fabrics and carpet materials, raises the pile, eliminates unpleasant odors and refreshes the air in the car;
– Prevents repeated contamination due to its antistatic properties.Application:
Shake the balloon thoroughly. We recommend that you treat the entire seat or product completely, not just individual spots. Spray the foam on the soiled textile surface and rub it in with the supplied sponge. After application, rinse the sponge several times and thoroughly wipe the treated surface with it or a clean, damp cloth. Repeat the procedure if necessary. -
$111.00
Thread Seal Tape is a universal PTFE tape for sealing and sealing threaded connections (“foam tape”) of any materials (metal and plastic, etc.). It can be used both in the repair of cars and other equipment, and in industry and in everyday life when installing and repairing plumbing units and gas pipes.
Properties:
– Length / width / thickness: 15m / 19mm / 0.075 mm.
– Low coefficient of friction. Fluorine-containing plastic polymers (PTFE) have a very low coefficient of friction, which facilitates the connection of fittings. Perform the role of a kind of pipe thread gasket, improving the fit and seal;
– Thermo stability. PTFE has an extremely high melting point for plastic – 327 degrees. They are designed for use at temperatures up to 260⁰ C. PTFE – excellent dielectrics (electrical insulators), which is an additional plus;
– Ductility, elasticity and tensile strength. Resistant to mechanical stress. They operate at a constant pressure of up to 10 MPa and can withstand drops of up to 41 MPa. The average service life is 13 years. The fluoropolymer film does not harden after use, making it possible to reuse the threaded connection. Prolonged exposure to light slightly degrades the properties;
– Chemical and biological inertia. It is highly resistant to aggressive chemicals-acids and alkalis, oil and fuel, and any solvents. Polymers are uniformly sheathed with fluorine atoms, which make the material inert to almost all chemicals. Decomposition is possible only under extreme conditions created in special laboratories. It is not subject to rot.Application: clean used threads with a brush or other tool from dirt and rust and degrease using 9691 MANNOL Brake Cleaner. The new thread is simply degreased. Wrap the tape on the thread, starting from the end of the thread, along the thread (to tighten the nut). Wind with a little effort so that the tape falls into the thread and stretches a little. Make the last turn just above the thread: overlap – to avoid slipping the tape. There is no need to wind too much tape (in several layers). Cut the tape from the reel.
-
$111.00
Tire Cleaner – a special foam cleaner for quick, easy and gentle cleaning and further maintaining the cleanliness of tires and giving them the best appearance in just one operation. It is suitable for any type of tires of any equipment and all types of rubber – without having a negative chemical effect on them.
Properties:
– Effectively dissolves and removes residues of petroleum products, including bitumen, as well as grease, dirt, salt, wear products of the brake system and asphalt, etc.;
– Restores the original properties of the rubber and the black color of the tires, gives them a gloss and prevents aging of the rubber, thereby increasing their service life;
– Further protects tires from the negative effects of the environment: moisture, dirt, petroleum products from the road, de-icing road reagents (salt) in winter, aggressive gases, etc.;Application:
Shake the balloon well and spray on the tire from about 10-15 cm. Leave on for 3-5 minutes, then wipe with a damp sponge or rinse with water. After completing the work, check the brakes at a low speed as the vehicle may have got on the brake pads or discs. Clean them if necessary. -
$111.00
Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system. -
$111.00
Universal cleaning agent for all internal and external surfaces of the car. Quickly and effectively removes greasy and oil stains, traces of insects, nicotine, rust and oxidation from plastic, glass, rubber, leather, velour, textiles, suede, paint, metal and enamel surfaces.
Application: Spray on the surface to be cleaned from a distance of 20-30 cm, leave for 5-10 minutes to absorb. Then wipe with a clean with dry cloth. Repeat if necessary. Store at a temperature of + 5 °C to + 40 °C.
-
$111.00
Liquid Soap Concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and cleaning of walls and floors of garages and other premises.
Product properties:
– Forms rich active foam;
– Effectively removes all types of stains and dirt: oil, fat, soot, etc. due to its excellent splitting properties;
– Suitable for washing glass and polycarbonate panels;
– Easily washed off with water without leaving streaks and smudges;
– Effective even when using hard water;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.Compatibility: Safe for paint surfaces and plastics.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:20 to 1:50, depending on the degree of contamination. -
$111.00
Window Wipes – wipes for fast and effective removal of various types of dirt from car windows, mirrors, headlights, as well as from any other transparent, mirror and smooth surfaces of vehicles, as well as in the office and at home (cleaning windows, mirrors, showcases, etc.).
Properties:
– Effectively removes road dirt, stains of various petroleum products, silicone film, matte coating, traces of insects and plants;
– Restore the shine and transparency of glass and mirror surfaces;
– Do not change the optical properties of glass, do not leave streaks;
– Excellent for removing tobacco plaque;
– Neutral to sealing materials, plastic and paintwork of the body;
– The delicate, pH-balanced formula of the impregnating composition is safe for the skin of hands. -
$111.00
Windshield Repair Kit- a professional set for restoring windshields. Unlike other similar products, it does not require ultraviolet radiation. The principle of the kit is to remove air from chips and cracks, and fill them with a strong resin, which makes the treated area of the glass even stronger than before. To achieve the best results, you should make repairs as soon as possible after the damage. Before the chipped or cracked area is contaminated.
Properties:
– Minimizes the risk of cracks after a pothole or chip on the windscreen is cured and helps prevent them from spreading further;
– High-quality repair resin of extremely low viscosity reliably fills even the smallest cracks;
– Allows you to restore the windshield within 30-50 minutes.Application:
1. Clean the damaged windshield from dust and dirt with a cleaning cloth. For best results, it is recommended to degrease the glass surface around the chip using 9691 MANNOL Brake Cleaner.
2. Remove glass fragments from the damaged area using a special red button.
3. Install the adhesive disc so that the damaged area is located in its center.
4. Place a black o-ring around the edges of the hole in the adhesive disc. Black o-rings can be used several times.
5. Glue the red mushroom shaped base on top of the adhesive disc and insert 2-6 drops of repair resin from a tube depending on the degree of damage – the more rays the crack has and the longer their length – the more resin is needed to fill all these cracks.
6. Install the syringe in the mushroom shaped base, with the plunger pressed all the way down. Then pull the piston as far as possible, creating a vacuum under the piston. Wait for 10 minutes. Remove the syringe. Push the plunger back in and place the syringe on the base, then pull the plunger out again as far as possible and wait for another 10 minutes.
7. Remove the syringe, mushroom shaped base, black ring and adhesive disc. If necessary, clean the glass from the adhesive disc with a scraper. To put the repair resin into any remaining damaged areas and cracks. Cover the damaged area with the repair resin applied with a thermal plate. Smooth the thermoplastics with a scraper and a cleaning cloth so that it fits snugly against the glass and there are no air bubbles under it. Remove excess resin from the edges of the thermoplastics with a cleaning cloth. Wait 15 minutes.
8. Remove the thermal plate or scrape it off with a scraper. Also, carefully scrape the dried repair resin from the glass.The kit includes:
– Repair resin – 1 PC.
– Adhesive disk – 3 PCs.
– Red mushroom shaped base – 1 PC.
– Thermoplastics – 5 PCs.
– Scraper with a blade – 1 PC.
– Syringe with spring clip – 1 PC.
– Cleaning cloth – 1 PC.
– Red button – 1 PC.
– Black o-ring – 2 PCs. -
$111.00
Windshield Sealant is a one-component polyurethane adhesive-sealer for pasting windshields where an increased safety guarantee is not required. It is used for fixing the front, rear and side windows to the bodies of cars, vans, railway transport and special purpose vehicles. The best results are achieved when using an air gun.
Meets the requirements (specification) of Loctite TEROSON PU 8597 HMLC.
The minimum ready time is 1 hour after application, according to FMVSS (USA) and 4 hours according to the most stringent European crash test standard.Properties:
– Suitable for applying to the opening of the windscreen made of any material, including aluminum;
– Due to its high initial hardness and exceptionally strong binding properties, no additional fixation of the glass is required;
– Very good resistance to sagging;
– Does not “reach” for the tool;
– High speed of polymerization;
– High shear strength and high shear modulus. Good elasticity even after long-term use;
– Very low electrical conductivity;
– Good adhesion to the residual materials of the old adhesive joint;
– High resistance to UV radiation;
– Excellent adhesion to glass, glass with a ceramic coating and to painted surfaces;
– High European safety standard.Application: Thoroughly clean the surfaces to be bonded from old glue, paint and other coatings, rust, dirt, grease and oil deposits. Degrease the surface of the windscreen opening at the landing site using 9691 MANNOL Brake Cleaner. Dry. Make sure that there are no damages or defects on the glass surface. To clean the surface and obtain optimal adhesion, it is recommended to sand the glass bonding line with a soft abrasive material. After sanding, clean the surfaces to be bonded using 9974 MANNOL Glas Cleaner and allow the cleaner to dry for 2 minutes. Degrease the surface of the glass using 9691 MANNOL Brake Cleaner. Dry. Heat the cartridge to 50-80 °C for 15 minutes. For large glasses, we also recommend preheating the second cartridge. Apply a thin layer of glue to the bonding points on the glass. It is allowed to apply glue not on the glass, but on the place of its landing in the opening of the windscreen on the body. It is necessary to start applying from the lower edge of the glass in a uniform layer without breaks along the contour and without gaps between the glue layer and the glass. Install the glass in the opening. Press lightly. The glass remains adjustable for 15 minutes. It is advisable to fix with tape, and then leave to dry. Complete polymerization and complete curing of the adhesive takes place within 24 hours. The car is suitable for driving after 1 hour, but in order to avoid displacement of the glass, which can subsequently lead to excessive internal stresses, and then cracks, it is advisable not to use the car at this time. The car itself must be on a flat surface. Bonding is desirable to be performed at room temperature and humidity of 50-60%.
-
$111.00
Complex detergent and lubricant ashless (does not contain metals and their compounds) petrol additive based on synthetic esters for all types of petrol (including two-stroke) and hybrid engines equipped with catalytic converters. Cleans both the fuel system and the exhaust system. Improves the efficiency of catalytic converters by cleaning them WITHOUT DISMANTLING, as well as optimises the operation of oxygen sensors (lambda probes), keeping them clean.
Properties:
– By increasing the combustion temperature and releasing active oxygen in the process, it burns out and removes deposits and impurities in the entire exhaust system, including the catalytic converter and sensors. The result is reduced resistance to exhaust gas movement, optimised composition of the fuel-air mixture and the combustion process, thus increasing engine power and energy conversion efficiency;– Reduces carbon monoxide formation, opacity and toxicity of exhaust gases, increases the life of catalytic converters, oxygen sensors, spark plugs, injectors and the engine as a whole. This eliminates the most common engine problems leading to “Check Engine” indications and reduces maintenance and repair costs;
– Ensures lubrication of the entire fuel system and cleaning of its individual elements from soot and deposits of all kinds (varnish, resins, etc.), especially from all types of injectors and carburettors, spraying nozzles, fuel pumps, intake valves and the combustion chamber, as well as avoids formation of new deposits thanks to the contained esters and special detergents. Reduces caking of piston rings, which prevents them from getting stuck. All this reduces excessive fuel and oil consumption;
– The strong and resistant oil film formed during the application of the additive significantly reduces wear of all fuel system friction couples and prevents corrosion of its elements, thereby increasing its service life, as well as reducing the wear of cylinders, pistons and piston rings;
– Eliminates problems with starting, restores uniformity of idling speed;
– Compatible with all construction materials;
– Ideal for vehicles operated in urban traffic.
Application: For maximum effective cleaning add in a ratio of 450 ml per 30 L of fuel (1:60) to the fuel tank; to prevent impurities add in a ratio of 1:100.
Recommended for regular use.
Shelf life: 5 years from date of production.
-
$111.00
Auto Shampoo is a highly foaming super – concentrate of shampoo with the highest washing and cleaning effect for manual contact washing of cars and other vehicles, which has conservation properties.
Properties:
– A special mixture of active substances-foaming agents creates a very rich active foam and thoroughly cleans the car;
– Active detergents effectively remove all types of stains and dirt: dust, fuel, oil, grease, soot, insect residues, etc. due to their excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving stains, streaks, smudges and other traces;
– Protects the body after washing and gives it an excellent shine, especially recommended for use before putting the car in storage (long-term parking);
– Quickly dissolves in both hot (warm) and cold water. Effective even when using hard water;
– Has a pleasant citrus smell;
– Phosphate-free, biodegradable.
Compatibility: safe for paint surfaces, plastics and rubber-technical products.Application:
Remove persistent soiling in advance with a strong stream of water.
To prepare the working solution, the concentrate must be diluted with water in a ratio of 1:100 (100 ml per 10 liters of water) to 1:20, depending on the degree of soiling. Apply the solution with a sponge to the surface of the car body. Leave for 5-10 minutes to act. RUB the car body with calm movements without pressure. Wash the surface thoroughly with clean water. The pH of the solution in a ratio of 1:100 (20 °C) is 7-7.5.Warning: Do not store the product in direct sunlight!
-
$111.00
Montage Cleaner is a special high – performance cleaner for metal car parts.
Properties:
– Suitable for parts made of any metals and alloys;
– Has excellent cleaning properties;
– Applicable to brake pads and discs, clutch and transmission parts, tools, etc.;
– Removes dirt, grease, oil and other petroleum products, brake fluid, residues of burnt and evaporated technical fluids;
– Facilitates disassembly and installation of parts, saves time for disassembly, reduces the effort applied when disassembling and dismantling components and parts during car repairs;
– Suitable for cleaning vehicle bodies, oil filters, motorcycle chains and timing chains, engines, door hinges and electrical contacts, garden equipment (minitractors, motor cultivators, lawn mowers, etc.).Application: Spray the cleaner on the dirty parts and in their joints and let it drain. After the solvents have evaporated, the parts remain clean and fat-free.
Attention: the Product may damage some paints and plastics. Before use, check the product for compatibility with them on a small invisible area of the surface.
All Products Loaded!
