UHPD SERIES
-
$111.00
Code : MN7110
Specifications : SAE 5W-40 / 5W40 / API CI-4/SL / ACEA E7 / ACEA E4
Recommendation / OEM Approval : MB 228.5 / MACK EO-N / MTU Type 3 / MAN M 3277 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
The universal all-season synthetic engine oil for modern high-load and high-speed diesel engines with and without turbocharging, operating in harsh conditions and at low ambient temperatures.
Product properties:
– A state-of-the-art additive package combined with a synthetic base of the highest quality, which has an ideal viscosity over a wide temperature range, provides unsurpassed anti-friction, anti-wear and extreme pressure properties, which significantly extends the service life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The synthetic base provides good thermal-oxidative stability, which in combination with excellent detergent – dispersing properties (TBN >12.5 to 15.2) and low ash content (on average 1.3%) effectively reduces carbon and varnish formation, prevents the formation of deposits of all types and maintains exceptional cleanliness of engine parts, especially the cylinder-piston group, throughout the entire interval between replacements;
– Modern formulation provides oil resistance to aging, and due to low evaporation and high flash point reduces oil consumption “on the burn”, which allows it to be used in engines with an extended oil change interval (Long Life more than 45,000 km) and conventional;
– It has excellent low-temperature properties, including a low pour point, which provides excellent oil pump ability and cranking of engine components at low temperatures, easy “cold start” ( -35 C° and below) and reduced starting wear;
– Compatible with EGR and SCR systems, not suitable for systems equipped with particulate filters (DPF);
– Effectively protects engine parts from all types of corrosion;
– Has a reduced foaming;
– Effectively combats the increase in shear forces during operation caused by an increase in viscosity due to soot dispersion;
– Can be used when working on fuel with a high sulfur content.It is intended for all types of high-load diesel engines of highway (mainline tractors, buses, etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V, where the level of performance properties CI-4 or lower is required.
It can be used in gasoline engines where the API SL or lower performance level is required. -
$111.00
Code : MN7114
Specifications : SAE 15W-40 / 15W40 / API CK-4 / ACEA E6 / ACEA E7 / ACEA E9 / JASO DH-2
Recommendation / OEM Approval : MB 228.31 / CATERPILLAR ECF-3 / CUMMINS CES 20086 / MAN M 3775 / DETROIT DIESEL DDC 93K222 / MACK EOS-4.5 Approval / RENAULT RLD-3 Approval / VOLVO VDS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity in a wide temperature range, provides excellent anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts in perfectly clean condition throughout the entire interval between replacements;
– A unique synthetic formulation provides increased oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems: DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V where a performance level of CJ-4 or lower is required.
Can be used in gasoline engines where API SN or lower performance is required. -
$111.00
Code : MN7117
Specifications : SAE 5W-30 / 5W30 / API CK-4 / ACEA E8 / ACEA E11
Recommendation / OEM Approval : VOLVO VDS 4.5 / CUMMINS CES 20086 / MAN M 3677 / IVECO (ACEA E6-2016) / DAF (ACEA E6-2016) / DETROIT DIESEL DDC93K222 / SCANIA LDF-4 / RENAULT RLD-3 / MACK EOS-4.5 / CATERPILLAR ECF-3 / MB Approval 228.51
Product Details
Energy-saving synthetic (PAO-based) motor oil for heavy duty and high-speed diesel engines of the latest generation with and without turbocharging, operating in severe conditions on low sulphur fuel. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– The unique low-viscosity synthetic PAO-containing base of the highest quality, with ideal viscosity in the required temperature range, combined with an innovative additive package, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extends the life of the equipment in all, even the most complicated, modes works in a fairly wide range of ambient temperatures and offers significant fuel savings;
– The synthetic base and special TBN boosters provide increased thermal oxidative stability, excellent detergent-dispersant properties (TBN> 10) to the oil and simultaneously low ash content, effectively reducing the formation of scaling and varnish, preventing deposits of all kinds and maintaining perfect engine parts, especially the cylinder-piston group, throughout the entire service period between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the PAO-containing base, the lower viscosity has perfect low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -35º C) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
For all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI requirements where the performance level of ACEA E6/E9 is mandatory. -
$111.00
Code : MN7105
Specifications : SAE 10W-40 / 10W40 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : CATERPILLAR ECF-2 / CATERPILLAR ECF-1-a / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-N / MACK EO-M Plus / MAN M 3275-1 / MB 228.1 / MB 228.3 / MTU Type 2 / RENAULT RLD-2 / VOLVO VDS-3
Product Details
Innovative all-weather semi-synthetic (esters + HC-synthes) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. The oil complies with the Global Specification GLOBAL-DHD-1, which takes into account all the requirements of European, American and Japanese manufacturers for heavy diesel engines manufactured since 1998, operating in the most difficult conditions with increased mileage between oil changes that comply with current standards for the content of toxic substances in exhaust gases and installed on heavy vehicles (more than 3.9 tons).
Product properties:
– Ester components in combination with the highest quality semi-synthetic base that meets GLOBAL DHD-1 requirements, featuring optimal viscosity in a wide temperature range, provide excellent anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The ester components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique ester-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the ester-containing base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30ºC) and reduced startup wear;
– Compatible with exhaust gas recirculation (EGR) systems. Reduces soot formation;
– Effectively protects engine parts from all types of corrosion;
– lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required. -
$111.00
Code : MN7106
Specifications : SAE 10W-40 / 10W40 / API CI-4 / ACEA E7 / ACEA E4
Recommendation / OEM Approval : CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-M Plus / MACK EO-N / MAN M 3377 / RENAULT RXD / RENAULT RLD-2 / VOLVO VDS-3 / MAN M 3277 Approval / MB Approval 228.5 / MTU Type 3 Approval
Product Details
All-weather modern synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Mercedes-Benz, MAN and MTU centres and has their written approvals.
Product properties:
– Synthetic base of the highest quality, featuring ideal viscosity in a wide temperature range, provides unsurpassed anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provide significant fuel savings;
– The stable synthetic base in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 12.5) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts, especially the cylinder-piston group, exceptionally clean throughout the service between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval not less than 500 engine hours and conventional motors;
– Due to the synthetic base with optimal viscosity it has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to
-30 ºC) and reduced startup wear;
– Compatible with EGR and SCR systems, not suitable for systems equipped with diesel particulate filters (DPF);
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required. -
$111.00
Code : MN7107
Specifications : SAE 10W-40 / 10W40 / API CK-4/CJ-4 / ACEA E8 / ACEA E11 / DAF (ACEA E6) / IVECO (ACEA E6)
Recommendation / OEM Approval : CATERPILLAR ECF-3 / CUMMINS CES 20086 / DETROIT DIESEL DDC 93K222 / MB 228.31 / MAN M 3775 / MACK EOS-4.5 Approval / MB Approval 228.51 / MAN M 3477 Approval / RENAULT VI RLD-3 Approval / VOLVO VDS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. The oil has successfully passed road and laboratory tests at VOLVO, Mercedes-Benz, MAN, MACK and RENAULT centres and has their written approvals.
Product properties:
– Synthetic base of the highest quality with an innovative additive pack, featuring optimal viscosity in a wide temperature range, provide ideal anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– The stable synthetic base provides increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 60,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals. -
$111.00
Code : MN7108
Specifications : SAE 5W-30 / 5W30 / ACEA E4 / ACEA E7
Recommendation / OEM Approval : VOLVO VDS-3 / MAN M 3277 / MAN M 3377 / MACK EO-N / RENAULT RLD-2 / MB Approval 228.5 / API CI-4 / MTU Type 3 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215
Product Details
Energy-saving synthetic (PAO-based) motor oil for heavy duty and high-speed diesel engines of the latest generation with and without turbocharging, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Daimler concern centres and has their written approvals.
Product properties:
– The unique low-viscosity synthetic PAO-containing base of the highest quality, with ideal viscosity in the required temperature range, combined with an innovative additive package, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extends the life of the equipment in all, even the most complicated, modes works in a fairly wide range of ambient temperatures and offers significant fuel savings;
– The synthetic PAO-containing base and the innovative additive package provide increased thermal oxidative stability and unsurpassed washing and dispersing properties to the oil (TBN > 12.5), effectively reducing the formation of scaling and varnish, preventing deposits of all kinds and maintaining perfect engine parts, especially the cylinder-piston group, throughout the entire service period between replacements;
– A unique PAO-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the PAO-containing base, the lower viscosity has perfect low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -35ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.For all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI requirements where the performance level of ACEA E4/E7 is mandatory.
-
$111.00
Code : MN7109
Specifications : SAE 10W-40 / 10W40 / API CJ-4/SN / ACEA E8, E11 / JASO DH-2
Recommendation / OEM Approval : MB 228.31 / MB 228.51 / VOLVO VDS-4 / MAN M 3477 / MAN M 3575 / MACK EO-N Plus / MACK EO-O Premium Plus / GLOBAL DHD-1 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / RENAULT RLD-3 / MTU Type 3.1 / CATERPILLAR ECF-2 / CATERPILLAR ECF-3 / DETROIT DIESEL DDC 93K218
Product Details
All-season synthetic low-ash engine oil for the latest generation of highly loaded and high-speed turbocharged and non-turbocharged heavy-duty diesel engines using low-sulphur fuels. The oil complies with the GLOBAL-DHD-1 specification, which takes into account all requirements of European, American and Japanese manufacturers of heavy-duty diesel engines produced since 1998, operating under heavy conditions with extended oil change intervals, meeting applicable standards regarding the content of toxic substances in exhaust gases and installed in heavy-duty vehicles (over 3.9 tons).
Product properties:
– A synthetic base of the highest quality with an innovative additive package offering ideal viscosity over a wide temperature range provides unsurpassed anti-friction, anti-wear and extreme pressure properties, which significantly prolongs the life of the vehicle at all, even the most extreme, operating conditions over a wide ambient temperature range and ensures significant fuel economy;
– A stable synthetic base gives the oil increased thermal-oxidative stability which, combined with excellent detergent and dispersant properties and low-ash content, effectively reduces the formation of deposits of all kinds and keeps the engine separate parts, especially the piston cylinder group, perfectly clean over the entire interval between oil changes;
– The unique formulation provides the oil with resistance to ageing and, due to its reduced evaporation and increased flash point, reduces the operating consumption, allowing it to be used in engines with extended oil change intervals (Long Life up to 60,000 km) and conventional engines;
– Due to the synthetic base of optimal viscosity it has excellent low-temperature properties, including a low pour point, which ensures excellent pumpability and turnability of engine components at low temperatures, easy cold start (down to -30 °C) and reduced starting wear;
– Compatible with all exhaust gas aftertreatment systems, DPF, TWC, EGR and SCR due to low SAPS technology;
– Effectively protects engine separate parts against all types of corrosion;
– It has a low foaming level and effectively resists aeration;
– Effectively counteracts the increase in shear force during operation caused by viscosity increase due to soot dispersion;
– Suitable for liquefied natural gas (LNG) and liquified petroleum gas (LPG) engines.Designed for all types of highly loaded diesel engines of highway (long-haul tractors, buses etc.), off-road (construction, mining, agricultural) and special vehicles of European, American and Asian manufacturers meeting Euro I–V and VI requirements, where the performance level CJ-4 or lower is required.
