Electric Brake bleeder ELEC CT4108
$111.00
Features:
– Fluid exchange can be done in 20 mins and exchanging speed is adjustable.
– Automatic shut off when the new fluid volume reaches a minimum fluid level with a warning signal.
– The tool case can be laid down to become an umbrella for the buttons and the meter during shipping.
– Including a universal adapter.
– You will get different adapters covered for 90% car type.
– The patented adapter design gives maximum fastening performance to avoiding fluid leakage during operation.
– Take it easy with deformed ports with our easy cap adapter.
– A filter promises the fluid pass through without other things.
Cylinder for CT4101 Altoelsammler (1pc.)
Instructions:
– Air supply must be filtered of water and oil impurities before connecting to the bank. Air supply is to be 87psi ~ 116psi (6bar ~ 8bar)
– Temperature of oil shouldn’t be higher than 60°C, oil temperature of 40-60°C is suggested.
– Please ensure the valve which connect between the tank and cylinder is closed for oil draining, air pressure in the tank is not allow to get into the cylinder, otherwise it could lead to explosion of cylinder and cause body injury.
– Tank pressure of 0.7bar (10psl) for oil extraction, the maximum air pressure is nor allow to exceed 1bar (14.5psl). Please make sure to evacuate the residual compressed air out of the tank before the next time use.
Features:
– A large 9.0 L capacity
– Manual fluid extractor can be used to extract many kinds of non-explosive liquids.
– Completely using hand pump when you without shop air.
– New safety design. when the tank is full of liquid, the vacuum will be shut off automatically.
– Fast, clean and easy operating.
– None electric spark, safety for workshop.
Product Features:
– Exclusive Deeptrans technology enhances fluid exchange performance bу 50%.
– Patented Double Wall Tank design let new fluid become warm which gives protection to transmission and pipelines.
– The high precision scale marks allows more accurate result of calibration and transfer rate. Precise manual transfer rate is guaranteed, if necessary.
– One-button control to complete processes like new/waste fluid exchanging, – quick and convenient.
– Available to check real-time changing results via two sight glasses
– Vehicle database included and can bе updated through USB port.
– Two fluid refill options
– Standard adapters work for most cars. Optional 72 types of adapter are available for special needs.
– Premium swivel casters with ideal-stop brake.
Technical data:
Voltage: AC220V 50/60Нz 1Ph
Power – 140W
Pressure gauge range 0~16Bar(0~220Psi)
Operating pressure ≤6Bar(0~87Psi)
Length of oil outlet hose – 2.5m
Length of oil return hose – 2.5m
Length of oil drain hose – 2.0m
Filter element precision – 5µm
Volume of new oil tank ≈19.5L
Volume of waste oil tank ≈15.5L
Equivalent replacement error ≤±0.05L
Мах. speed of oil exchange – 3.0L /Min
Dimension of machine: 510mm x 485mm x 1360mm
Package dimension: 495mm x 495mm x 1390mm
Durable chemical resistant 3L sprayer, especially suitable for professional cleaning with aggressive solvents in hard to reach areas. Seals and lines are resistant to all common cleaning agents, solvents, petrol and oils.
Specification:
– 3 liter container made of robust cold-rolled stainless steel
– Metal, durable pump handle for pressure build-up even of high pressures
– Wide pump handle for simple one-hand pumping
– 2 chemical resistant high pressure hoses
– Spray tube and nozzle made of brass / stainless steel
– Various spray nozzles for every purpose
– Large filling opening for convenient filling of the container
– Adjustable carrying straps with key rings attached to the container
– With pressure relief valve
– Hose length: approx. 130cm
– Regular working pressure 1 – 3 bar
– Pressure resistant up to 8 bar
Specifications:
Functions – Remove, clean, and replace fluid from most types and models of automatic gearboxes, transmissions, hydraulic torque transmissions, gearbox radiators and radiation pipelines.
Power supply – 220V, 50HZ，1PH
Pump power – 250W
Oil Inlet and Return Hoses – 3-(2x) 126 (L) x1/2(dia.) inches (1-red, 1-blue) (1) 137(L) x1/2(dia.) inches (red); All with male and female quick couplers, 300 PSL (max.) rated.
Pressure Gauges – Both 2-3/4 (dia.) inches;0~100 PSI, 20 PSI increments; 0~7 Bar, in 1 and 1/10 Bar increments.
Filter – Auto Oil Filter, 4-3/4(L) x 3(dia.) inches; 17mm x 1.7 female threads.
Fluid Capacity – 2tanks (for new and old fluids), 30L/ 8 gallons per tank.
Operating Temperature – Less than 80℃
Professional stationary pneumatic oil pump for Workshops incl. compressor, tubes, tube coil.
Description:
Industrial hose reel
Inlet/Outlet (inch) – 1/4’’
Max. pressure (psi/bar) – 218/15
Hose capacity (inch) – 1/4’’
Length (ft/m) – 50/15
Application – Air
Two-piece telescopic tube suitable for drums up to 208 L. Pumps water-based liquids, antifreeze and all oil-based liquids as well as other non-corrosive liquids. Pumps approximately 0.3 L of liquid in a single run. Galvanized for durability. Has soft vinyl handle. Suitable for barrel heights of 47-90 cm.
Specifications:
Function: collect waste oil from vehicle gear box or engine
Power: compressed air
Air Consumption: 52 Gallons/min (200L/min.)
Air Inlet Pressure(vacuum) 87~116Psi/6~8Bar
Air Inlet Pressure (Oil ejection pressure) 10~14PSI/0.7~1Bar
Vacuum Degree 0~-14Psi/0~-1Bar
Tank Capacity- 80L
Perspex cylinder Capacity (Practicable/total) -11/12L
Collect tray capacity- 20L
Height – About 1580mm~1890mm
Working Temperature – 40~60 ֯ C (for engine oil)
AH-02 Compressor Air Hose PU 10 m is a spiral compressor hose of 10 m length, designed for supplying air tools with compressed air. The hose is made of polyurethane and it is resistant to wear, tear as well as fire. The coupling is easily released and ensures a quick and comfortable connection of the compressor to air tools.
Product Characteristics:
Coupling – EU Type
Inner diameter x outer diameter- 8x12mm
Length- 10m
Material – Polyurethane
Optimal Temperature -40 °C to +85 °C
Packing unit – 25 pc
Pressure – up to 14 bar
Product Features:
– Еnаblеs to select different modes through the intelligent operation panel;
– The distinctive double wall tank design guarantees safe operations and cleverly warms the new coolant during exchange;
– Protects the engine and pipelines in the cooling system;
– Dual pumps separate the new coolant from the used, ensuring pure fluid is transferred during exchange;
– Leak check function;
– Unique transparent body with graduations and hose collected in semicircle shape;
– Innovative design to quickly change to another type of coolant when needed within 2-3 minutes;
– DC 12 V vehicle battery cables and the compact shape allow easy access to the working place;
– Optimised structure makes maintenance easy and convenient;
– Included into the set are standard metal adapters which meet most models on the market.
Technical data:
Voltage: DC 12 V
Motor power: 120 W
Working pressure of exchanging: ≤8 bar
Working pressure of leak checking: ＜1.2 bar
Recharge/return hose length: 2.5 m
Fluid discharge hose length: 2 m
Capacity of new coolant tank: max. 20 L
Capacity of used coolant tank: max. 16 L
Pumping capacity: about 7.0 L/min
Device dimensions: 450*450*1350 mm
Automatic device for filling of air conditioning systems for hybrid vehicles for which the manufacturer prescribes the use of R134a.
Suit for: Hybrid car
Refrigerant: R134a
Mode: Fully-automatic
Screen: LCD
Specifications:
Recovery speed: 180~350G/min
Recharge speed: 800~1500G/min
Vacuum speed: 60L/min
Refrigerant tank available capacity: 14 L
Electronic scale range: 0~35KG
Oil bottle capacity: 300ML
Operating temperature: 5~50℃
Voltage： AC220v/50Hz/1PH
Max. working pressure：17.5bar
Low pressure protection：Less than 1 bar
Electronic scale precision：±10g
Compressor：275w
