-
$111.00
Code : MN8208
Specifications :JASO M315 Type 1A
Recommendation / OEM Approval : LEXUS ATF Type T-IV / TOYOTA ATF Type T-IV
Product Details
A special synthetic transmission fluid (ATF) for automatic gearboxes of TOYOTA/LEXUS vehicles with new-generation TOYOTA and AISIN AW gearboxes. It ensures a flawless operation of an automatic gearbox, guarantees minimal wear, a lasting service life of transmissions and fuel economy. It was developed on the basis of the requirements set by the company AISIN WARNER.
Product properties:
– The highest-quality synthetic base with a consistent high viscosity index in combination with a multifunctional additive package preserves all its properties in a wide range of temperatures: it ensures good lubricating properties at low (-45 °C) temperatures in winter and ensures a stable oil film under extreme loads and at high temperatures in summer;
– A high-technology combination of additives ensures good antifriction properties for gear couplings and required friction properties for friction elements thus ensuring a significant fuel economy, a continuous and smooth transmission shift and an extended service life of all transmission elements. It ensures a coordinated and smooth operation of clutches;
– It has an increased thermal-oxidative and chemical stability and resistance to the high-temperature thermal degradation throughout the entire service life. It allows reducing lacquering, formation of sludge, soot and other carbon deposits, increasing the time between oil changes and ensuring the durability of transmission components thus reducing the equipment maintenance costs;
– It protects metal parts from ferrous and non-ferrous alloys from corrosion when both in and not in operation;
– It effectively resists aeration and foam formation;
– It ensures a compatibility with all sealing materials, prevents them from swelling, hardening and shrinking that allows reducing the costs for spare parts and prevents leakages;
– It reduces noise.It is recommended for automatic Toyota and Aisin AW gearboxes where the compliance with the TOYOTA TYPE-IV requirements is required. It may replace fluids T, T-II T-III.
Colour: red.
Comply with the manufacturer’s instructions provided in the user’s manual! -
$111.00
Code : MN8970
Specifications :
Recommendation / OEM Approval : ALLISON C3 / CATERPILLAR TO-2 / GM ATF Type A Suffix A
Product Details
Universal all-season mineral oil for power steering systems, automatic transmissions of older generations, torque converters and hydraulic clutches of all types of vehicles. Designed following GM requirements.
Product properties:
– Can be used all year round, even in frigid environments due to very low pour point (-45 °C and below);
– Maintains stable viscosity and fluidity even at low temperatures due to a stable viscosity index. Functionality is not dependent on the operating temperature, which ensures minimal power loss, high energy conversion efficiency and low maintenance costs;
– Compatible with all types of gaskets, seals and hoses;
– High thermal and antioxidant stability at high temperatures protects against the formation of deposits and reduces losses due to evaporation;
– Optimum frictional properties ensure smooth operation of the transmission and excellent longlasting synchronization even in harsh operating conditions;
– Effectively redirects heat generated by transmissions to the car body or the cooling system;
– Protects against corrosion, wear and effectively resists foaming.Designed for use as a hydraulic and power transmission fluid for cars and trucks, buses and other special vehicles in accordance with the GM ATF-A Suffix specification A.
-
$111.00
Code : MN8217
Specifications :
Recommendation / OEM Approval : AISIN WARNER NWS-9638 / AISIN WARNER NWS-9638 T5 / AISIN WARNER JWS-3324 / CHRYSLER ATF+3 / CHRYSLER ATF+4 / CHRYSLER AS68RC / GM 88863400 / GM 88863401 / LEXUS ATF WS Lifetime / LEXUS 08886-02303 / LEXUS 08886-02305 / LEXUS 08886-80803 / LEXUS 08886-80807 / LEXUS 08886-81210 / LAND ROVER LR0022460 / MAN 339 Type Z1 / TOYOTA ATF WS Lifetime / TOYOTA 08886-02303 / TOYOTA 08886-02305 / TOYOTA 08886-80803 / TOYOTA 08886-80807 / TOYOTA 08886-81210 / VOLKSWAGEN G 055 540-A2 / VOITH ATs 55.6335
Product Details
A special low-viscosity synthetic transmission fluid (ATF) for automatic gearboxes of TOYOTA/LEXUS vehicles with latest-generation TOYOTA and AISIN AW gearboxes, including sequential. It ensures a flawless operation of an automatic gearbox, guarantees minimal wear of ball bearings, stuffing boxes and gears, a lasting service life of the whole transmission and fuel economy. It was developed on the basis of the requirements set by the company AISIN WARNER.
Product properties:
– The highest-quality low-viscosity synthetic base with a consistent high viscosity index in a combination with a multifunctional additive package preserves all its properties in a wide range of temperatures: it ensures good lubricating properties at low (-45 °C) temperatures in winter and ensures a stable oil film under extreme loads and high temperatures in summer, ensures necessary antifriction properties even in the event of a discontinuity of the oil film during overloads;
– The high-technology combination of additives ensures good antifriction properties for gear couplings and required friction properties for friction elements thus ensuring a significant fuel economy, an exceptionally smooth transmission shift and a significant increase in the service life of all transmission elements;
– It ensures a coordinated and smooth operation of clutches, extends the service life of friction elements, prevents hydraulic converter’s contact elements from sliding when changing modes thus significantly reducing their wear;
– It has a superior thermal-oxidative and chemical stability and resistance to the high-temperature thermal degradation throughout the entire service life. It allows reducing lacquering, formation of sludge, soot and other carbon deposits to a minimum, significantly increasing the time between oil changes and ensuring the durability of transmission components thus reducing the equipment maintenance costs;
– It protects metal parts from ferrous and non-ferrous alloys from corrosion when both in and not in operation;
– It effectively resists aeration and foam formation;
– It ensures a compatibility with all sealing materials, prevents them from swelling, hardening and shrinking that allows reducing the costs for spare parts and prevents leakages;
– It reduces noise.It is recommended for last-generation Toyota and Aisin AW automatic gearboxes in which the compliance with the above-mentioned TOYOTA requirements is required, as well as for automatic gearboxes of passenger cars and commercial vehicles produced by European manufacturers.
Colour: red.
Comply with the manufacturer’s instructions provided in the user’s manual! -
$111.00
Auto Wash & Wax ASW-super shampoo concentrate with the highest washing and cleaning action for manual contact washing of cars and other vehicles with the properties of polish.
Properties:
– A special mixture of active substances-foaming agents creates very active foam and thoroughly cleans the car;
– Active detergents effectively remove all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to their excellent splitting properties;
– Due to the contained wax components, it forms a strong and transparent film that protects the body after washing and gives it an excellent long-lasting shine;
– Easily washed off with water without leaving stains, streaks, smudges and other traces;
– It is recommended to dissolve in hot water.
Compatibility: safe for paint and varnish surfaces, plastics and rubber-technical products.Application:
In advance remove large dirt with a strong stream of water.
To prepare the working solution, the concentrate must be diluted with hot water in a ratio from 1:100 (100 ml per 10 liters of water) to 1:20, depending on the degree of soiling. Apply the solution with a sponge to the surface of the car body. Leave for 5-10 minutes to act. RUB the car body with calm movements without pressure. Wash the surface thoroughly with clean water. the pH of the solution in a ratio of 1: 100 (20 °C) is 7-8. -
$111.00
Pump/Soap Dispenser for accurate and makes your soap last longer
– Compatible with hand wash paste Auto Master 9957 5 liter
– Also suitable for other container with a diameter of 40 mm screw thread
– Handy pump dispenser. -
$111.00
Code : MN8205
Specifications :
Recommendation / OEM Approval :ALLISON C4 / CATERPILLAR TO-2 / GM Dexron II D / MAN 339 V1 / MAN 339 Z1 / MB 236.5 / MB 236.7 / RENK / VOITH H 55.6335.xx (G607) / ZF TE-ML 03D / ZF TE-ML 04D / ZF TE-ML 11A / ZF TE-ML 14A / ZF TE-ML 17C
Product Details
A universal all-season mineral-based transmission fluid (ATF) for automatic gearboxes, hydraulic power steering systems, cab tilt mechanisms, car hydraulic clutches and other hydraulic devices, including the ones operating under heavy-duty conditions in trucks and off-road vehicles. It ensures a flawless operation of an automatic gearbox, guarantees minimal wear, a lasting service life of transmissions and fuel economy. It was developed on the basis of the requirements set by the GM group.
Product properties:
– The high-quality low-viscosity base in combination with a multifunctional additive package preserves all its properties in a wide range of temperatures: it ensures good lubricating properties at low (-45 °C) temperatures in winter and ensures a stable oil film under extreme loads and at high temperatures in summer;
– The high-technology combination of additives ensures good antifriction properties for gear couplings and required friction properties for friction elements thus ensuring a significant fuel economy, a continuous and smooth transmission shift and an extended service life of all transmission elements. It prevents scuffing;
– It has an increased thermal-oxidative stability and resistance to the high-temperature thermal degradation allowing decreasing the sludge formation, increasing the time between oil changes and reducing equipment maintenance costs;
– It protects metal parts from ferrous and non-ferrous alloys from corrosion when both in and not in operation;
– It effectively resists aeration and foam formation;
– It provides a compatibility with sealing materials, prevents them from swelling, hardening and shrinking that allows reducing the costs for spare parts and prevents leakages;
– It reduces noise.It is recommended for automatic gearboxes of passenger cars and commercial vehicles requiring the oil of ATF Type Dexron-IID quality, it is mixed with brands of similar quality.
Colour: red.
Comply with the manufacturer’s instructions provided in the user’s manual! -
$111.00
Code : MN8206
Specifications :
Recommendation / OEM Approval : ALLISON C4 / CATERPILLAR TO-2 / FORD Mercon V / FORD ESP-M2C138-CJ / FORD ESP-M2C166-H / GM Dexron III H / GM Dexron III G / GM Dexron III F / MB 236.1 / VOITH H 55.6335.xx (G607) / ZF TE-ML 09 / ZF TE-ML 11 / ZF TE-ML 14
Product Details
A universal all-season synthetic-based transmission fluid (ATF) for automatic gearboxes, hydraulic converters, hydraulic power steering systems, car hydraulic clutches and other hydraulic devices, including the ones operating under heavy-duty conditions in trucks and off-road vehicles. It ensures a flawless operation of an automatic gearbox, guarantees minimal wear, a lasting service life of transmissions and fuel economy. It was developed on the basis of the requirements set by GM and Ford groups.
Product properties:
– The highest-quality low-viscosity synthetic base with a consistent high viscosity index in combination with a multifunctional additive package preserves all its properties in a wide range of temperatures: it ensures good lubricating properties at low (-45 °C) temperatures in winter and ensures a stable oil film under extreme loads and high temperatures in summer;
– The high-technology combination of additives ensures good antifriction properties for gear couplings and required friction properties for friction elements thus ensuring a significant fuel economy, a continuous and smooth transmission shift and an extended service life of all transmission elements. It ensures a coordinated and smooth operation of clutches. It prevents scuffing;
– It has an increased thermal-oxidative and chemical stability and resistance to the high-temperature thermal degradation throughout the entire service life. It allows reducing lacquering, formation of sludge, soot and other carbon deposits, increasing the time between oil changes and ensuring the durability of transmission components thus reducing the equipment maintenance costs;
– It protects metal parts from ferrous and non-ferrous alloys (especially radiators) from corrosion when both in and not in operation;
– It effectively resists aeration and foam formation;
– It ensures a compatibility with all sealing materials, prevents them from swelling, hardening and shrinking thus allowing reducing the costs for spare parts and prevents leakages. It effectively protects fluoroelastomer seals of heavy equipment;
– It reduces noise.It is recommended for automatic gearboxes of passenger cars and commercial vehicles requiring the ATF Type Dexron-III H/G/F or Dexron-II E or FORD MERCON V quality oil. It is designed for the majority of automatic gearboxes for General Motors, Ford Company and other brands manufactured up to 2006.
Colour: red.
Comply with the manufacturer’s instructions provided in the user’s manual!
-
$111.00
Code : MN8100
Specifications :
Recommendation / OEM Approval : VOLKSWAGEN G 060 175 A2 / VOLKSWAGEN G 055 175 A2 / VOLKSWAGEN G 052 175 A2 / BMW 8322 2413513 / VOLVO 31367940 / OPEL 1940057 / VAUXHALL 1940057 / GM 93165387 / LAND ROVER LR 003136 / LAND ROVER LR 054941
Product Details
The special synthetic transmission oil is developed for Haldex couplings of all generations, as well as for Allroad, Quattro and 4motion couplings and ensures long and smooth operation of these mechanisms. Designed to meet the special requirements of the VW group G 060 175.
Product Properties:
– High-quality low-viscosity synthetic base with a high and stable viscosity index in combination with a special complex of additives and inhibitors retains all its properties over a wide temperature range: it provides good lubricating properties and excellent fluidity at low (up to -60 °C) temperatures and provides a stable oil film under extreme loads and high temperatures;
– The high-tech additive combination provides excellent friction properties and a constant coefficient of friction for the friction elements, which provides significant fuel savings, smooth, jerky connection of the rear drive and increased service life. Ensures smooth and stable operation of the coupling. Prevents scuffing and wear of the clutches and discs;
– It has high thermal-oxidative and chemical stability, shear stability under all operating conditions and modes, as well as resistance to high-temperature thermal degradation throughout the entire service life. This allows you to reduce the formation of sludge and other carbon deposits, increase the oil change interval (up to 60,000 km at least) and ensure the durability of the coupling parts and especially the hydraulic pump, which reduces the cost of their maintenance;
– Due to the addition of special inhibitors, it protects metal parts made of ferrous and non-ferrous alloys from corrosion both during operation and in non-working condition;
– Effectively resists foaming and cavitation, has excellent cooling properties;
– Compatible with all seal materials, prevents them from swelling, hardening and shrinkage, which reduces the cost of spare parts and prevents leaks;
– Reduces noise.Recommended for use in AUDI, VOLKSWAGEN, SEAT, SKODA, OPEL, LANDROVER and VOLVO all-wheel drive vehicles equipped with Haldex, Allroad, Quattro and 4motion couplings where compliance with the requirements of VW G 060 175 A2 is required.
Follow the manufacturer’s instructions in the operating instructions! -
$111.00
Functional, comfortable and lightweight backpack with a built-in USB charger and charging cable. All you need is one of our power banks to charge your device on the go. The backpack has multiple convenient pockets for your accessories – phone, documents, and notebook. A soft compartment holds laptops up to 15,6″ safe and steady. It is a perfect fit for business trips and everyday use.
-
$111.00
Ballpen with MANNOL laser engraving in a gift box.
-
$111.00
Bandage Tape wide universal insulation tape based on polyester fabric. Designed specifically for the manufacture of cable harnesses in the car and in its engine compartment-oil and petrol resistant. It can be used both in the repair of cars and other equipment, and in industry and in everyday life during electrical work. Ideal for isolating any electrical connections.
Properties:
– Length / width / 10 m / 25 mm;
– Easy to use;
– The structure of the tape provides it with high strength-resistance to high mechanical loads (including breaking) and wear resistance – resistance to abrasion;
– Resistant to micro-organisms (rot), chemical effects and contamination;
– Resistant to aging, high temperatures, water, UV radiation;
– Very elastic-stretches well without losing adhesion;
– Reduces the noise level;
Shelf life: 5 years from the date of production. -
$111.00
Tarpaulin advertising banner with MANNOL oils. Specially designed for outdoor use on bright sun and bad weather.
Size: 1x3m
-
$111.00
Industrial style barrel chair made of a new MANNOL 208 L barrel. The seat and backrest are made of black, durable imitation leather with silver stitching. All edges are provided with a protective profile. Ideal for display at exhibitions as well as for use as decoration in offices or garages.
-
$111.00
Code : MN8108
Specifications : SAE 75W-90 / 75W90 /API GL 4+
Recommendation / OEM Approval : MIL L 2105 / VOLKSWAGEN 501.50
Product Details
An all-season universal last-generation energy-conserving gear oil (containing PAO) designed specially for the lubrication of manual transmissions with an incorporated differential of front drive vehicles. It is suitable for all types of synchronized and non-synchronized manual transmissions (including heavy-loaded). It was developed on the basis of the requirements set by the VW Group.
Product properties:
– The unique PAO base of the highest quality with ideal viscosity in a wide range of temperatures in combination with a latest-generation additive package ensures superior antifriction properties thus ensuring a significant fuel economy and a very smooth transmission shift;
– Due to its unique composition, it ensures excellent antiwear and anti-scuffing properties that significantly extend the expected life of the technical equipment in all, even the most extreme, modes of operation in a wide range of ambient temperatures. The oil film has an increased resistance to elevated pressure;
– It ensures excellent low-temperature properties that ensure an easy starting, reliable lubrication, as well as an easy and precise transmission shift at any ambient temperatures (up to -40 °C) and in any operating conditions;
– It has an increased thermal-oxidative stability and excellent resistance to the high-temperature thermal degradation allowing increasing the time between oil changes and reducing equipment maintenance costs. The recommended replacement period is 40,000 km/2 years;
– It effectively protects from lacquering and synchronizer ring clogging;
– It protects metal parts from corrosion;
– It provides an excellent compatibility with sealing materials, prevents them from swelling, hardening and shrinking thus allowing reducing the costs for spare parts and preventing leakages;
– It reduces noise;
– It is suitable for moderately loaded non-incorporated differentials.It is recommended for use in manual transmissions (with and without an incorporated differential) of passenger cars and highly loaded manual transmissions of highway (freight trucks, buses, etc.), off-road (construction, mining, agricultural) and special vehicles produced by European, American and Asian manufacturers in which the required level of service characteristics is GL-4. It is especially recommended for passenger cars of the VW and Ford groups.
Comply with the manufacturer’s instructions provided in the user’s manual. -
$111.00
Belt Tensioner – means for care of driving belts: quickly, safely and effectively eliminates extraneous sounds (creaking, whistling, etc.) and slipping of belts, cleans them from dirt, removes traces of oils, restores elasticity, protects against drying and cracking. It is used for drive belts of alternators, air conditioners, power steering and other units.
Properties:
– Reduces wear on belts and pulleys, prevents their aging, thereby extending their service life;
– Increases the efficiency of the belt drive;
– Reduces noise during operation of the engine;
– Especially effective for eliminating the slippage of old belts when they can not be replaced or stretched;
– Suitable for V-belts and semi V-belts, not suitable for flat belts;
– For belts made of leather, various fabrics impregnated with rubber or balata, chemical fibers, nylon, polyurethane and other synthetic materials;
– Regular use of the product extends the service life of the belts by 1.5–2 times.Application:
Stop the belt drive. Spray a small amount of the product from a distance of approximately 20 cm on the pulley under the side surfaces of the belt and/or directly on the side surfaces themselves. Turn the belt drive at least one full turn of the belt so that the product is evenly distributed over the belt surface. Repeat the procedure one or more times if you want to achieve a greater thickness of the protective layer. After applying the last layer leave to act for 10 minutes before starting the engine again.
Code : MN7915
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : MB 229.5 / MB 229.3 / MB 226.5 / JASO MA2 / VOLKSWAGEN 502.00 / VOLKSWAGEN 505.00 / PORSCHE A40 / RENAULT RN0710 / RENAULT RN0700 / BMW LL-01 / BMW LL-98 / PSA B71 2296 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative universal ester-containing premium motor oil for modern gasoline and diesel engines with and without turbocharging, including “old” brands and high mileage. Designed based on the requirements of European producers.
Product properties:
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Applicable to 4T wet clutch motorcycle engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in the engines of Daimler, VW, Opel, GM, Renault vehicles imposing additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
Diesel fuel additive for cleaning and regeneration of all types of Diesel Particulate Filters (DPF) without dismantling and disassembling. Suitable for all types of diesel fuel and for all types of diesel engines equipped and not equipped with automatic DPF regeneration systems. Especially recommended for cars operating in the city (in traffic jams) and / or when using low quality fuel.
Regular use helps to restore the DPF to factory settings.
Product properties:
– Reduces the ignition temperature of soot in DPF, thereby accelerating and facilitating the process of its afterburning at all engine operating modes, and especially in urban mode, thereby extending the filter life and reducing the cost of operating the car;
– Increases the completeness of fuel combustion, thereby reducing its consumption, all other things being equal;
– By increasing the completeness of combustion, it increases power and reduces soot formation and toxicity of exhaust gases. It can be used to prevent clogging of the particulate filter.
Application: Add to the tank before refueling in the ratio of 400 ml to 60 liters of fuel. Use every 2000 km.
Recommended for regular use.
Code : MN4112
Specifications : SAE J1034 / JASO M325
Recommendation / OEM Approval : AFNOR FRANCE NF R15-601 (except for RA) / ASTM USA D3306 / ASTM USA D4656 / ASTM USA D4985 / ASTM USA D6210 / BSI GB BS 6580:2010 / FVV GERMANY Heft R443 / KSM SOUTH KOREA 2142 / MIL BELGIUM BT-PS-606-A / MIL FRANCE DCSEA 615/C / MIL ITALY E/L-1415b / MIL SWEDEN FSD 8704 / NATO S-759 / OENORM AUSTRIA V5123 / UNE SPAIN 26-361-88/1 / ADE / ASTON MARTIN / VOLKSWAGEN TL 774 D / VOLKSWAGEN TL 774 F / BEHR / BERGEN ENGINES 2.13.01 / BMW GS 94000 / BRB BR 637 / CASE NEW HOLLAND MAT 3624 / CATERPILLAR MAK A4.05.09.01 / CHEVROLET / CLAAS / CUMMINS CES 14439 / CUMMINS CES 14603 / CUMMINS IS series N14 / DACIA 41-01-001 / 41-01-001-T / DAF 74002 / DETROIT DIESEL DFS 93K217 / FENDT / FORD WSS-M97B44-D / GREAT WALL / HITACHI / ISUZU / JAGUAR CMR 8229 / JAGUAR STJLR.651.5003 / JENBACHER TA 1000-0201 / JOHN DEERE JDM H5 / KAROSA / KOBELCO / KOMATSU 07.892 (2009) / LAND ROVER STJLR.651.5003 / LEYLAND TRUCKS DW03245403 / LIEBHERR MD1-36-130 / MACK 014 GS 17009 / MAN 324 Typ SNF / MAN B W A S / MAN B W DIESEL AG D36 5600 / MAZDA MEZ MN 121 D / MB 325.3 / MITSUBISHI MHI / MTU MTL 5048 / MWM 0199-99-2091/11
Product Details
A carboxylated (organic – OAT Organic Acid Technology) concentrated antifreeze intended for a year-round use in any modern cooling system for which the use of ethylene-glycol-based antifreeze is recommended.
It ensures a reliable protection of any cooling system.
Product properties:
– It ensures a reliable protection of metals and alloys (brass, copper, alloy-treated steel, cast iron, aluminium) from all forms of corrosion, as well as prevents a high-temperature corrosion of aluminium surfaces of modern engines. It provides sufficient anti-corrosion properties from the concentration as low as 20%;
– It has an exceptional thermal stability. It protects from deposit formation;
– It has excellent heat conductivity properties and a resistance to foam formation;
– It is neutral to inserts and hoses, compatible with all types of rubber and plastic components of a cooling system;
– It has an excellent resistance to hard water and very low corrosion inhibitor depletion rates;
– The highly effective carboxylated additive package (OAT) ensures an exceptional stability of service qualities of the antifreeze throughout the entire service life;
– It does not contain silicates, nitrates, phosphates and amines (the NAP free technology);
– It has an extended service life in cooling systems: of passenger cars – up to 250 thousand km; of commercial vehicles – up to 500 thousand km; of stationary engines – up to 6 years.
It is recommended for engines requiring enhanced heat dissipation: highly accelerated engines, engines with a turbocharger and cooling systems of modern commercial vehicles.
Colour: red.
Service life: no less than 5 years.
Comply with the manufacturer’s instructions provided in the user’s manual!
| Pour point, °C | Mix ratio, % | |
| Coolant fluid ratio | Water ratio | |
| -20 | 35 | 65 |
| -25 | 40 | 60 |
| -29 | 45 | 55 |
| -38 | 50 | 50 |
Code : MN3002
Specifications : SAE J1703/J1704 / ISO 4925 / FMVSS 116 DOT 4 / JIS JAPAN K2233
Recommendation / OEM Approval :
Product Details
Synthetic brake fluid based on polyglycols and esters, containing corrosion and oxidation inhibitors. Designed for hydraulic systems of all traditional brake devices and clutches.
Product properties:
– Contains boric acid, which completely neutralizes water condensate;
– Provides reliable operation of the brake system at any ambient temperature due to the increased boiling point (>245 °C) and excellent low-temperature properties (up to -40 °C);
– Has the highest chemical and thermal stability;
– Offers excellent lubricity and viscosity-temperature properties;
– Neutralizes the formation of vapour bubbles;
– Compatible with elastomers;
– Entirely inactive for the parts of the brake system.
Aggressive to paintwork.
Follow the manufacturer’s instructions in the instruction manual!
Color: colorless / light brown.
Code : MN7715
Specifications : SAE 5W-30 / 5W30 / API SN / ACEA C3
Recommendation / OEM Approval : MB 229.51 / VOLKSWAGEN TL 52 195 / BMW Longlife-04 / PORSCHE C30 / VOLKSWAGEN 504 00 Approval / VOLKSWAGEN 507 00 Approval
Product Details
Innovative universal premium bi-synthetic engine oil (PAO-based) for modern petrol and diesel engines of VW group cars (including direct injection) with and without turbocharging, including those equipped with pump-injectors (Pumpe-Düse).
Product properties:
– Due to the ester components contained, it has excellent anti-wear, extreme pressure and anti-friction properties, which ensures long and trouble-free operation of the pump-nozzle system and the entire gas distribution mechanism, reducing cam wear;
– Due to its excellent detergent-dispersing properties and high thermal-oxidative stability, it effectively combats all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– Saves fuel due to optimal anti-friction properties;
– Ester components together with the bi-synthetic base provide a low solidification temperature (-45 °C and below) and guarantee easy low-temperature engine start-up due to exceptional turn ability and pump ability, which significantly reduces engine starting wear;
– It has optimal viscosity over a wide temperature range, which ensures stable operation in all operating modes, including in urban mode and under overload conditions;
– Due to its high thermal-oxidative stability, it effectively resists aging;
– Compatible with all exhaust gas neutralization systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Suitable for engines running on liquefied natural gas (LNG) and petroleum gas (LPG).
Designed for gasoline and diesel engines of EURO IV and EURO V wide fleet of vehicles (cars, light SUVs, vans and light trucks) of VW imposes additional requirements on motor oils in accordance with the specifications 504.00/507.00 and previous.
The oil is not suitable for use in heavy trucks and similar vehicles!
The Latest development – a lubricating additive in gasoline. It is intended for all types of fuel systems of gasoline engines, first of all – for engines with direct fuel injection into cylinders. In diesel engines, such a power system was introduced earlier and showed its effectiveness, but also found a number of problems related to the lack of quality of lubrication of moving metal parts of the fuel system, and especially the high pressure fuel pump. We present a multifunctional complex for gasoline fuel. This balanced package of additives meets the most modern requirements, is compatible with any gasoline fuel, is easily mixed with it and completely dissolves, and is guaranteed to improve any commercial gasoline fuel, even if it contains ethanol, giving it best consumer properties, transferring it to the rank of the so-called "brand" fuel. When testing the lubricity of commercial gasoline AI-95, a more than twofold decrease in the diameter of the wear spot was recorded when only 0.1% of the additive was introduced into the fuel (1 liter of additive per 1000 liters of gasoline). In addition, the additive has a friction modifier and an ignition promoter, which increases the completeness of fuel combustion and reduces the formation of carbon deposits in the combustion chamber. With regular use of the additive, engine performance improves and significant fuel savings occur (2-5%)
Properties:
– Guaranteed to improve the lubricity of gasoline, protects the entire fuel system and its individual elements from corrosion, especially: all types of injectors, carburetor jets, fuel pumps, intake valves and the combustion chamber, prevents excessive fuel and oil consumption;
– All other things being equal, it increases the engine power and acceleration of the car, including by improving the lubricating properties of gasoline, reducing friction in the cylinder zones and ensuring optimal fuel dispersion;
– Reducing carbon formation, smoke and toxicity, increases the life of spark plugs, oxygen sensors, catalysts, injectors (injectors) and the engine as a whole;
– Forms a stable oil film on the parts of the fuel system, which prevents their corrosion;
– The strong and stable oil film formed when using Benzin Ester Additive significantly reduces the wear of all rubbing pairs of the fuel system, thereby increasing its service life, and also reduces the wear of cylinders, pistons and piston rings;
– Eliminates problems with starting, restores the uniformity of idle speed and reduces detonation;
– A clean engine uses less fuel and emits less harmful substances;
– Compatible with all exhaust gas and turbocharging systems;
– Compatible with all construction materials;
– Recommended for preserving the engine when it is idle for a long time.
Application: Add to the tank in the ratio of 50 ml per 50 liters of fuel.
Recommended for regular use.
Shelf life: 5 years from the date of production.
Code : AD3001
Specifications : DIN 70070 / ISO 22241-1 / ISO 22241-2 / ISO 22241-3
Recommendation / OEM Approval :
Product Details
AdBlue® is a high-purity 32,5 % w/w urea solution which is used as an additional working fluid in diesel cars and trucks equipped with SCR technology (Selective Catalytic Reduction). The composition of AdBlue® is specified in DIN 70070. The use of such systems optimises engine performance, reduces the emission of harmful particles in exhaust gases and complies with the environmental standards Euro 4, Euro 5 and Euro 6.
AdBlue® is a registered trademark of the German Association of the Automotive Industry (VDA Verband der Automobilindustrie e.V.).
Code : MN7921
Specifications : SAE 0W-20 / 0W20 / ACEA C5 / API SP (RC)
Recommendation / OEM Approval : MB 229.71 / BMW LL-17FE+ / VOLVO VCC RBS0-2AE (ServiceFill) / OPEL OV0401547 / GM dexos1 Gen2 / GM dexosD / HONDA HTO-06 / GM 6094M / CHRYSLER MS-6395 / CHRYSLER MS-13340 / JAGUAR STJLR.51.5122 / LAND ROVER STJLR.51.5122 / FORD WSS-M2C947-A / FORD WSS-M2C947-B1
Product Details
Innovative energy-saving, low-viscosity bi-synthetic (PAO + esters) premium engine oil for the latest models of turbocharged gasoline engines (multipoint or direct injection) with gasoline particulate filters.
Product properties:
– Due to the unique bi-synthetic base and the esters contained in it, it has excellent anti wear, antifriction and extreme pressure properties, which ensures long and trouble-free operation of all engine systems, including turbo units. Effectively protects the timing chain from wear;
– Eliminates uncontrolled premature ignition of the fuel-air mixture in engines with direct injection (Low Speed Pre Ignition or LSPI);
– Outperforms similar oils of the SN category in terms of detergent and dispersant properties and thermal-oxidative stability, effectively combats all types of deposits and keeps engine parts clean throughout the entire drain interval. Effectively protects against high-temperature deposits on the piston and turbocharger, effectively fights sludge and lacquer formation;
– Outperforms similar SN oils in terms of fuel efficiency due to their unique composition and excellent antifriction properties;
– Bi-synthetic low-viscosity PAO + Ester base guarantees easy low-temperature engine start due to exceptional cranking and pump ability, which significantly reduces engine starting wear;
– Possesses optimal viscosity in a wide temperature range (for engines in which it is recommended), which ensures their stable operation in all operating modes, including overload;
– Due to its high thermo-oxidative stability, it effectively resists aging;
– Fully compatible with all exhaust gas after treatment systems, DPF, TWC, EGR and SCR through the use of Mid SAPS technology;
– Compatible with ethanol-containing fuels;
– It is used in engines with an extended oil change interval (Long Life up to 30,000 km) and conventional ones.
Recommended for use in gasoline engines of the latest generations of European and Japanese car manufacturers, which impose additional requirements for engine oils in accordance with the above standards and specifications.
The oil is not suitable for use in heavy trucks and similar vehicles!
Code : MN7901
Specifications : SAE 0W-40 / 0W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : ACEA A3/B4 / BMW LL-04 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / MB 229.5 / MB 229.3 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / GM LL-A-025 / GM LL-B-025 / FIAT 9.55535-M2 / FORD WSS-M2C937-A / CHRYSLER MS-10725 / CHRYSLER MS-12633 / Additional_Recommended_Applications for AMG
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines. Designed in accordance with the requirements of German automakers.
Product properties:
– A unique bi-synthetic (PAO + esters) base with an expanded range of viscous and temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as at increased load (when driving on the road, uphill, with a trailer, maximum load) and at high ambient temperatures:
– Due to its excellent washing-dispersing properties and the highest thermal-oxidative stability, it effectively fights against all types of deposits and keeps engine parts and turbochargers clean throughout the entire interval between replacements;
– Low viscosity bi-synthetic base (PAO + esters) and a highly effective additive package provide reliable cold start in the most severe conditions, which significantly reduces engine starting wear;
– Due to the exceptional strength of the oil film created by the ester components, it has excellent anti-seize, anti-wear and anti-friction properties, which allows to save fuel and, combined with excellent pumpability, significantly increase engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel.
Designed for gasoline and diesel engines (with and without turbocharging) a wide fleet of cars (cars, light SUVs, minibuses and light trucks of European and other manufacturers), where the performance level of API SN / CH-4 and lower, as well as ACEA A3/B4.
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
