Chrom Politur – polish for any chrome-plated surfaces in engineering and in everyday life (plumbing). Suitable for cleaning and polishing: stainless steels, aluminum and copper alloys, as well as alloys containing tin.
Properties:
– Effectively removes rust, stains, dirt, including old ones;
– Contains extremely fine abrasive, does not leave micro-scratches and does not damage the chrome coating;
– Effectively cleans glossy surfaces, restoring their original Shine;
– Creates a strong transparent protective film, preventing tarnishing of surfaces in the future.
Application: apply a small amount of MANNOL Chrom Politur to a thoroughly cleaned surface, rub it into the surface in a circular motion with a cloth or sanding sponge and rub it with the same circular movements. Clean the surface and finally wipe it thoroughly with a soft microfiber cloth until the surface is completely cleaned.
Auto Shampoo is a highly foaming super – concentrate of shampoo with the highest washing and cleaning effect for manual contact washing of cars and other vehicles, which has conservation properties.
Properties:
– A special mixture of active substances-foaming agents creates a very rich active foam and thoroughly cleans the car;
– Active detergents effectively remove all types of stains and dirt: dust, fuel, oil, grease, soot, insect residues, etc. due to their excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving stains, streaks, smudges and other traces;
– Protects the body after washing and gives it an excellent shine, especially recommended for use before putting the car in storage (long-term parking);
– Quickly dissolves in both hot (warm) and cold water. Effective even when using hard water;
– Has a pleasant citrus smell;
– Phosphate-free, biodegradable.
Compatibility: safe for paint surfaces, plastics and rubber-technical products.
Application:
Remove persistent soiling in advance with a strong stream of water.
To prepare the working solution, the concentrate must be diluted with water in a ratio of 1:100 (100 ml per 10 liters of water) to 1:20, depending on the degree of soiling. Apply the solution with a sponge to the surface of the car body. Leave for 5-10 minutes to act. RUB the car body with calm movements without pressure. Wash the surface thoroughly with clean water. The pH of the solution in a ratio of 1:100 (20 °C) is 7-7.5.
Warning: Do not store the product in direct sunlight!
Lock De-Icer is an ideal car lock defroster that quickly unlocks vehicles in severe frosts. Provides fast defrosting of locks, hinges and other movable joints operated at low temperatures.
Properties:
– Thanks to its high penetrating power, it quickly defrosts frozen parts of locks, restoring their functionality;
– Contains corrosion inhibitors that prevent rust formation;
– Forms a film on the surface that has a lubricating effect;
– Prevents re-freezing;
– Regular use protects the locks from freezing even at low (down to – 50 °C) temperatures.
MANNOL Acryl Paint Silver – quick-drying silver paint for painting various surfaces of the car, made almost from any materials. It is created on the basis of synthetic acrylic resins. It is also intended for painting, decorative design and repair of small objects and household products, elements of landscape and interior design that are not subjected to mechanical loads.
Properties:
– Dries quickly, which minimizes the time required for painting;
– Forms a coating with high performance characteristics, which has good hardness, light resistance (retains color and does not fade in the sun), hiding power, resistance to environmental influences, washing and wet cleaning with non-abrasive detergents. It does not age, can withstand temperatures within 180° C, is inert to oils, fuels, acids, alkalis, thermoplastic and water-resistant;
The coating is a homogeneous, with no craters, pores, wrinkle and foreign inclusions of the surface. The color of the coating must be within the tolerance limits set by the RAL catalog;
– Has excellent adhesive properties-forms a strong and resistant coating;
– Transmits the tone well, and to a lesser extent depends on the thickness of the layer, which cannot be said about competitive materials, where spots appear when the layer is uneven;
– Perfectly combined with many types of primers;
– Does not contain ozone-depleting substances and heavy metal compounds;
– Can be used for self-repair, in workshops and as a universal everyday paint in everyday life.
Application:
Suitable for painting MANNOL Acryl Paint Silver: metal surfaces, including those previously painted with powder paints (external walls of refrigerators, washing machines, microwave ovens, etc.); any plastic surfaces; natural dense fabrics (posters, clothing items); dense mineral surfaces: concrete, brick, plastered (except for facades), plasterboard, artificial and natural stone, unglazed ceramics, crushed stone, etc., used in atmospheric conditions and indoors. It can be used for painting and decorating wood products (furniture elements, photo frames, windows, doors, etc., except for floors) and glass used indoors.
The surface to be painted must be thoroughly cleaned of grease and other contaminants, rust, scale, old peeling paint, sanded, degreased with a solvent, we recommend the MANNOL Brake Cleaner 9691 degreaser, and dried. To obtain a more durable coating, metal surfaces should be primed with an anti-corrosion primer. Cover areas of the surface that are not subject to painting with paper or paint tape.
The temperature of the surface to be painted must exceed by at least 3° C the dew point (the temperature at which moisture from the air condenses on a solid surface). Drying time of the coating at a temperature of (20 ± 2)° C-1 h. it is allowed to apply the second layer in 2-3 minutes.
To get a rich color, it is recommended to apply the paint in at least 3 layers. The first layer is the base, applied very thinly. Intermediate layers (layer) should be thicker. The last layer is also applied thinly. After applying each layer, give it time to dry, but no more than 30 minutes. When applied “wet”, the highest degree of adhesion between the paint layers is achieved.
Paint should be done outdoors in calm weather, in industrial areas, warehouse premises in the presence of ventilation. Before applying, shake the balloon for 3 minutes after the ball knocks. Safety valves workability – when pressed, the valve should open, releasing the contents, when released to stop release of content (should not pass the content through the connection nipple head). Spray vertically in a thin layer from a distance of 25-30 cm at a temperature of 5° C to 30° C. Spray first horizontally, then after a short pause, vertically. Depending on the color, the number of layers is from 1 to 3. After the work is completed, clean the valve: to do this, turn the spray bottle down and press the valve for 2-5 seconds.
A single bottle can be paint up to 2 m² of even surface. It depends on the type, quality and preparation of the surface to be painted, climate factors, color and skills of the worker. If necessary, apply a special transparent varnish over the paint.
Silicone Spray is a universal protective water – resistant, insulating and antifriction agent based on organosilicon compounds. It is intended, among other things, for effective lubrication of rubbing surfaces made of dissimilar materials (for example, metal and plastic) to eliminate jamming, creaking and cracking that occur during vehicle operation. It is recommended for use where the use of lubricants containing petroleum products and fats is undesirable.
Properties:
– Forms a solid transparent polymer layer of silicone molecules on the treated surface, which gives the surface excellent water-, dust-repellent and antistatic properties, in addition, it reduces friction, prevents creaking, freezing and corrosion;
– Can be used both inside and outside the car, on surfaces made of plastic, rubber, metal, wood, etc.
– Protects surfaces and restores their Shine, protects against UV exposure;
– Restores the elasticity of rubber and plastic parts and protects them from drying and cracking;
– Does not contain mineral oils and fats.
– Recommended for lubrication of rollers and guides of seat belts and hatches, for protection against freezing of rubber seals of doors, hoods, trunk lids, etc . protects against aging and embrittlement of bumpers, radiator grilles, spoilers, moldings, vinyl covers, etc. protects against moisture and water electrical equipment and contacts.
Application: clean the surface to be treated before use. Shake the balloon well before use. Spray evenly on the surface in the required amount from a distance of 10-15 cm. If necessary, wipe the surface with a dry cloth. Do not use on objects that have contact with food. You can apply the product on a dry sponge or cloth and wipe the surface thoroughly. Avoid applying to glass, varnished or fabric surfaces. Do not use on the steering wheel, pedals, or door handles.
Montage Cleaner is a special high – performance cleaner for metal car parts.
Properties:
– Suitable for parts made of any metals and alloys;
– Has excellent cleaning properties;
– Applicable to brake pads and discs, clutch and transmission parts, tools, etc.;
– Removes dirt, grease, oil and other petroleum products, brake fluid, residues of burnt and evaporated technical fluids;
– Facilitates disassembly and installation of parts, saves time for disassembly, reduces the effort applied when disassembling and dismantling components and parts during car repairs;
– Suitable for cleaning vehicle bodies, oil filters, motorcycle chains and timing chains, engines, door hinges and electrical contacts, garden equipment (minitractors, motor cultivators, lawn mowers, etc.).
Application: Spray the cleaner on the dirty parts and in their joints and let it drain. After the solvents have evaporated, the parts remain clean and fat-free.
Attention: the Product may damage some paints and plastics. Before use, check the product for compatibility with them on a small invisible area of the surface.
Schleifpaste Profi Set is a set of professional diatomite abrasive pastes for manual and MECHANICAL polishing of paint coatings. Pastes differ in the grain size of the abrasives. MANNOL Schleifpaste No. 1 removes deep scratches, damaged, oxidized or dull top layers of paint due to the large abrasive grains contained in it. It allows you to easily remove smudges and stains of lacquers and paints during the restoration of the body, as well as adjust the color shades during partial painting. MANNOL Schleifpaste No. 2 removes small scratches, minor defects in paint coatings and solidified residues of petroleum products due to the micro abrasive components contained. It easily removes excess varnish after painting the body, facilitates deep cleaning of the surface, removes rust and aggressive substances from the micro cracks of the paintwork and individual chrome parts. Sizes of abrasive particles: MANNOL Schleif Paste No. 1 – 75 microns, MANNOL Schleif Paste No. 2 – 3 microns.
Application:
Clean the surfaces to be treated. RUB MANNOL Schleif paste No. 1 on small areas with a cloth or sponge, with the necessary pressure, Until the damaged and oxidized layers of the previous coating, rust, oxides, dirt and scratches are removed. For a mirror-like finish, apply MANNOL Schleif Paste No. 2 liberally to the surface using the supplied wet cloth and Polish it, then rinse it off.
Tire Shine is a particularly resistant and hardy water – based blackener for tires that gives them a long-lasting and intense black color and Shine.
Properties:
– Contains polymers and natural oils: the coating formed in this way, unlike silicone, does not allow the rubber to dry and does not attract dust and dirt;
– Not only creates a coating, but also is absorbed by rubber – tires retain an intense black color and Shine for several weeks in any weather: under the sun and in the rain;
– Returns a rich dark black color even to faded gray tires, masking micro-cracks and minor defects;
– Creates a waterproof and water-repellent film on the surface after four hours;
– Softens rubber, protects tires from further cracking and counteracts the aging of rubbers of any composition;
– Protects the rubber from the damaging effects of ultraviolet light;
– It can handle the bumper and moldings (if they are black) and rubber seals on the car doors to prevent freezing in the cold.
Application:
Thoroughly clean the surface to be treated, apply the product as thinly as possible with a sponge and that’s it!
Attention: avoid getting the product on the wheels and in the brake system.
Tar Remover – highly effective concentrated cleaner of resinous and other hard-to-remove dirt from any surfaces of cars, motorcycles and other equipment, as well as in everyday life. It is used for cleaning paint and chrome surfaces, windows, headlights, bumpers and moldings, etc.
Properties:
– Removes bitumen (tar), asphalt chips, dried spots from oils and other technical liquids, insect stains and traces, bird droppings, oxidized and degraded paint coatings without damaging the surfaces:
– Enhances the gloss and color of the treated surface;
– The solvents included in the cleaner allow it to easily and quickly penetrate into the pores and microcracks of the surface, providing a deep and complete cleaning;
– Leaves no stains, no smudges, no traces.
Application: Spray 9666 MANNOL Tar Remover on the surface to be cleaned and leave for a while to act (3-5 minutes). Wipe with a soft cloth or sponge.
Attention: before using on polycarbonate plastics and acrylic glass, check the product for compatibility with these materials on a small invisible area of the surface.
Shelf life: 5 years from the date of manufacture.
Tire Cleaner – a special foam cleaner for quick, easy and gentle cleaning and further maintaining the cleanliness of tires and giving them the best appearance in just one operation. It is suitable for any type of tires of any equipment and all types of rubber – without having a negative chemical effect on them.
Properties:
– Effectively dissolves and removes residues of petroleum products, including bitumen, as well as grease, dirt, salt, wear products of the brake system and asphalt, etc.;
– Restores the original properties of the rubber and the black color of the tires, gives them a gloss and prevents aging of the rubber, thereby increasing their service life;
– Further protects tires from the negative effects of the environment: moisture, dirt, petroleum products from the road, de-icing road reagents (salt) in winter, aggressive gases, etc.;
Application:
Shake the balloon well and spray on the tire from about 10-15 cm. Leave on for 3-5 minutes, then wipe with a damp sponge or rinse with water. After completing the work, check the brakes at a low speed as the vehicle may have got on the brake pads or discs. Clean them if necessary.
Liquid Soap Concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and cleaning of walls and floors of garages and other premises.
Product properties:
– Forms rich active foam;
– Effectively removes all types of stains and dirt: oil, fat, soot, etc. due to its excellent splitting properties;
– Suitable for washing glass and polycarbonate panels;
– Easily washed off with water without leaving streaks and smudges;
– Effective even when using hard water;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces and plastics.
Application: To prepare the working solution, the concentrate must be diluted with water in a ratio from 1:20 to 1:50, depending on the degree of contamination.
Speed Wax – highly effective and fast-acting polish for paintwork of car bodies and other equipment based on natural Carnauba wax to maintain them in perfect condition. Applicable to plastic and rubber parts of the car body.
Properties:
– Gives the treated paint coatings a bright glossy shine and rich color for a long time, masks scratches and damage to the coating;
– When liquid gets on the paint surface, it forms a “water-beading effect” – the effect of water beads, when the liquid remains on the surface in the form of small drops like scattered beads. This means that water flows freely from the paintwork, reducing straps and streaks that could form on its surface. This also means that any dirt and road dust will also roll off it, reducing the need for hard mechanical cleaning during the washing process, which in turn minimizes the appearance of micro-scratches and damage. The end result is a slippery paint surface that is much easier to clean and dry;
– Seals damage to the paintwork, penetrating even microscopic scratches and preventing corrosion, and further contributes to better adhesion to the paintwork of hard wax, nanoceramics, etc.;
– Protects the paintwork during frequent car wash;
– Has a long-lasting protective effect, preventing paint surfaces from the harmful effects of the environment. Restores protective properties of coatings;
– Suitable for any type of paintwork;
– Applicable to plastic and rubber parts of the car body;
– Can be applied to wet and dry surfaces;
– Suitable for polishing machines.
Application: before applying 9977 MANNOL Speed Wax, shake it hard several times, then apply it to a soft cloth, polishing cloth or sponge, then apply it with a small pressure in a circular motion, even and thin layer on the cleaned and washed paint surface, and then also – in a circular motion – polish. It is best to polish with clean microfiber.
Universal shampoo concentrate with the highest washing and cleaning effect for use in foam generators (high-pressure devices) for non-contact washing and for manual contact car washing.
Product properties:
– Forms very rich active foam;
– Effectively removes all types of stains and dirt: dust, fuel, oil, fat, soot, insect residues, etc. due to its excellent splitting properties;
– Suitable for washing glass;
– Easily washed off with water without leaving streaks and smudges and whitish spots;
– Leaves a great glossy effect;
– Can be diluted with warm and cold water. Effective even when using hard water;
– Has a citrus smell;
– Does not contain phosphates;
– Biodegradable, environmentally friendly product that meets all EU requirements.
Compatibility: Safe for paint surfaces, plastics and rubber-technical products.
Application:
For non-contact washing: to prepare the working solution, dilute the concentrate with water in a ratio from (1: 20 to 1: 50), depending on the degree of contamination.
For manual washing: First remove large dirt with a strong stream of water. To prepare the working solution, the concentrate must be diluted with water in a ratio from 1: 10 to 1: 20) depending on the degree of contamination. Apply the mixture with a sponge on the surface to be cleaned and distribute it over it. Then rinse thoroughly with water and wipe with suede.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it. Privacy PolicyAccept
Reviews
There are no reviews yet.