| Size | 5 Liter, 10 Liter, 20 Liter, 60 Liter, 208 Liter, 1000 Liter |
|---|
MANNOL TS-1 SHPD 15W-40 7101
$111.00
Code : MN7101
Specifications : SAE 15W-40 / 15W40 / API CH-4/SL / ACEA E7 / ACEA A3/B4
Recommendation / OEM Approval : MAN M 3275-1 / MB 228.3 / MB 229.1 / MTU Type 2 / VOLVO VDS-2
Product Details
Multigrade mineral engine oil with the addition of hydrosynthetic components for modern heavy-duty and high-speed turbocharged and non-turbocharged diesel engines operating under severe conditions. Especially designed to protect your equipment and get the most out of it, regardless of its operating conditions.
Product properties:
– Modern additives in combination with a mineral base of the highest quality ensure good anti-friction and anti-wear properties, which significantly extend the service life of the vehicle compared to analogue oils in all, even the most extreme, operating conditions, while ensuring considerable fuel savings;
– It has improved thermal-oxidative stability, which in combination with excellent detergent and dispersant properties (TBN >10) effectively reduces carbon and lacquer formation, prevents formation of all kinds of deposits and keeps engine separate parts clean throughout the whole interval between oil replacements;
– The unique formulation provides the oil with resistance to ageing and, by reducing evaporation, reduces the operating consumption, enabling it to be used in engines with extended oil change intervals (Long Life) and conventional engines;
– It has good low-temperature properties, including a low pour point, which ensures good oil pumpability and turnability of engine components at low temperatures, easy cold start and reduced starting wear;
– Effectively protects engine separate parts against all types of corrosion;
– Can be used when operating on fuels with high sulphur content.
It is intended for all types of highly loaded diesel engines of highway (long haul trucks, buses etc.), off-road (construction, mining, agricultural) and special equipment of European, American and Asian manufacturers meeting Euro I, II, III, IV requirements, where CH-4 level of performance properties or lower is required.
Can be used in petrol engines where the performance level API SL or lower is required.
$111.00
Code : MN7106
Specifications : SAE 10W-40 / 10W40 / API CI-4 / ACEA E7 / ACEA E4
Recommendation / OEM Approval : CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215 / MACK EO-M Plus / MACK EO-N / MAN M 3377 / RENAULT RXD / RENAULT RLD-2 / VOLVO VDS-3 / MAN M 3277 Approval / MB Approval 228.5 / MTU Type 3 Approval
Product Details
All-weather modern synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Mercedes-Benz, MAN and MTU centres and has their written approvals.
Product properties:
– Synthetic base of the highest quality, featuring ideal viscosity in a wide temperature range, provides unsurpassed anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provide significant fuel savings;
– The stable synthetic base in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 12.5) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts, especially the cylinder-piston group, exceptionally clean throughout the service between replacements;
– A unique formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval not less than 500 engine hours and conventional motors;
– Due to the synthetic base with optimal viscosity it has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to
-30 ºC) and reduced startup wear;
– Compatible with EGR and SCR systems, not suitable for systems equipped with diesel particulate filters (DPF);
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00 – $1,111.00
Code : MN7915
Specifications : SAE 5W-40 / 5W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : MB 229.5 / MB 229.3 / MB 226.5 / JASO MA2 / VOLKSWAGEN 502.00 / VOLKSWAGEN 505.00 / PORSCHE A40 / RENAULT RN0710 / RENAULT RN0700 / BMW LL-01 / BMW LL-98 / PSA B71 2296 / FIAT 9.55535-H2 / FIAT 9.55535-Z2 / CHRYSLER MS-10850 / CHRYSLER MS-10896 / CHRYSLER MS-12991 / GM LL-A-025 / GM LL-B-025
Product Details
Innovative universal ester-containing premium motor oil for modern gasoline and diesel engines with and without turbocharging, including “old” brands and high mileage. Designed based on the requirements of European producers.
Product properties:
– Ester technology and a synthetic base with an expanded range of viscous-temperature properties ensures efficient engine operation in all operating modes: during cold start, in urban mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures;
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Synthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is applied in engines with the extended interval of replacement of oil (Long Life) and ordinary;
– Applicable to 4T wet clutch motorcycle engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in the engines of Daimler, VW, Opel, GM, Renault vehicles imposing additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7118
Specifications : SAE 15W-40 / 15W40 / API CK-4 / ACEA E8 / ACEA E11
Recommendation / OEM Approval : MB 228.31 / MB 228.51 / VOLVO VDS-4.5 / CUMMINS CES 20086 / MAN M 3775 / IVECO (ACEA E6-2016) / DAF (ACEA E6-2016) / DETROIT DIESEL DDC93K222 / RENAULT RLD-3 / MACK EOS-4.5 / CATERPILLAR ECF-3
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity in a wide temperature range, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extend the life of equipment in all, even the most extreme, operating modes in a wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base of the latest generation provide the highest thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides exceptional oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 100,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7504
Specifications : SAE 10W-40 / 10W40 / API CH-4/SL / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 502 00 / VOLKSWAGEN 501 01 / VOLKSWAGEN 500 00 / MB 229.3 / MB 229.1 / PSA B71 2294 / RENAULT RN0700 / RENAULT RN0710
Product Details
Innovative universal ester-containing motor oil on a hydrosynthetic basis for diesel engines, both new and “old” brands and with high mileage. Specially designed for turbocharged engines.
Product properties:
– Ester technology and a hydrosynthetic base with an extended range of viscous-temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as under increased load (when driving on impassable roads, uphill, on the move with trailer, maximum load) and at high ambient temperatures:
– Great for active driving and does not lose its properties when using fuel of variable quality (with sulfur content up to 500 ppm) due to the large reserve of alkaline number (TBN);
– Hydrosynthetic ester-containing base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– The ester oil components in combination with a unique modern additive package provide excellent anti-wear and anti-friction properties due to the exceptional strength of the oil film, which, combined with good pumpability, significantly increases the engine’s service life even in “start-stop” driving modes and during cold start;
– Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements;
– It is possible to use in gasoline engines.
Designed for diesel engines in a wide fleet of cars (cars, light SUVs, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW vehicles with additional requirements for engine oils (according to the above specifications).
$111.00
Code : MN7121
Specifications : SAE 10W-30 / 10W30 / API CK-4/SN / API CJ-4/CI-4 Plus / ACEA E8 / ACEA E11 / JASO DH-2
Recommendation / OEM Approval : CUMMINS CES 20086 / CUMMINS CES 20087 / RENAULT Truck RLD-4 / FORD WSS-M2C171-F1 / MB 228.31 / DETROIT DIESEL DDC93K222 / DETROIT DIESEL / DDC93K223 / MTU Type 2.1 / CATERPILLAR ECF-3 / ALLISON TES-439 / MAN M 3775 / MAN M 3575 / VOLVO VDS-4.5 Approval / RENAULT VI RLD-3 Approval / MACK EOS-4.5 Approval
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines of the latest generation with and without turbocharger, operating in severe conditions on low sulphur fuel. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the ultimate quality synthetic base, with perfect viscosity in the required temperature range provide unrivaled anti-friction, anti-wear and anti-scuffing properties, significantly extending the life of equipment in all, even the most extreme, operating modes in a rather wide range of ambient temperatures and provides significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts, especially cylinder-piston, in perfectly clean condition throughout the entire interval between replacements;
– A unique synthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems, DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Reduced foaming and effective resistance to aeration;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion.
Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI where a performance level of CK-4 or lower is required.
When using CK-4 oils with fuels containing more than 15 ppm sulphur, make sure to follow the recommendations of the engine manufacturer for service intervals.
$111.00
Code : MN7406
Specifications : SAE 15W-40 / 15W40 / API SG/CD
Recommendation / OEM Approval :
Product Details
An all-season economy-class mineral engine oil for modern high-load and high-speed 4-stroke diesel-powered engines of tractors with and without a turbocharger operating under harsh conditions. It was developed specially for ensuring the protection of the agricultural equipment and receiving the maximum return regardless of its operating conditions.
Product properties:
– Modern additives combined with a highest-class mineral base ensure good antifriction and antiwear properties that significantly extend the expected life of the equipment in comparison with oil analogues in all, even the most extreme, operation modes and simultaneously ensure fuel conservation;
– In contrast with analogues, it has an enhanced thermo-oxidising stability that, when combined with excellent cleaning-dispersing properties, efficiently reduces the formation of carbon deposits and lacquer, prevent the formation of deposits of all types and maintain engine parts clean throughout the entire time between replacements;
– A unique formula ensures the ageing resistance of the oil;
– It has good low-temperature properties, including a sufficiently low freezing point that would ensure a good oil pumping quality and the cranking ability of engine subsystems at low temperatures, an easy “cold start” and the reduction of the startup wear;
– It effectively protects engine parts against all types of corrosion;
– It may be used when operating on fuel with an increased sulphur content.
It is designed for all types of high-load diesel-powered engines of agricultural and other off-road equipment (construction, mining) and special equipment produced by European, American and Asian manufacturers in compliance with Euro I, II, III requirements where the required level of operating properties is CD or lower.
It may be used in petrol-powered engines with the required level of operating properties API SG or lower.
$111.00
Code : MN7512
Specifications : SAE 10W-30 / 10W30 / API SN / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 505 00 / VOLKSWAGEN 501 01 / MB 229.1 / ISUZU / KIA
Product Details
Hydro-synthetic universal motor oil for all types of gasoline engines. Designed to meet VW and DAIMLER requirements.
Product properties:
– The hydrosynthetic base ensures efficient operation of the engine in all operating modes: during cold start, in urban mode and in highway mode;
– Due to its good washing and dispersing properties and high thermal oxidative stability, it effectively fights against all types of deposits (carbon deposits, varnishes) and keeps engine parts clean throughout the entire interval between replacements;
– Contains an effective set of antioxidants due to which it effectively resists aging;
– Saves fuel due to the low viscosity base base;
– The hydro-synthetic base combined with a modern additive package preserves engine power parameters throughout the entire interval between replacements;
– Applicable for diesel engines.
Designed for gasoline and diesel engines in a wide fleet of cars (cars, light utility vehicles, vans and light trucks) of European and other manufacturers.
Recommended for use in engines of Daimler, VW vehicles that impose additional requirements for engine oils (according to the above specifications), when API SN or lower performance is required, as well as ACEA A3/B4.
The oil is not suitable for use in heavy trucks and similar vehicles!
$111.00
Code : MN7120
Specifications : SAE 10W-30 / 10W30 / API CJ-4/CK-4 / ACEA E8 / ACEA E11 / JASO DH-2
Recommendation / OEM Approval : MB 228.31 / MB 228.51 / MB 235.28 / SCANIA Low Ash / MAN M 3677 / MAN M 3477 / VOLVO VDS-4 / RENAULT Truck RLD-3 / MACK EO-O Premium Plus / MACK EO-O Premium Plus -07 / MTU Type 3.1 / CATERPILLAR ECF-2 / CATERPILLAR ECF-3 / CUMMINS CES 20081 / DETROIT DIESEL DDC 93K218 / VOITH Retarder Class B
Product Details
All-weather synthetic motor oil for heavy-duty and high-speed diesel engines with and without turbocharger, operating in difficult conditions. The oil has successfully passed road and laboratory tests at VOLVO, MACK and RENAULT centres and has their written approvals.
Product properties:
– An innovative additive package in combination with the highest quality synthetic base, featuring optimal viscosity within the required temperature range, provides excellent anti-friction, anti-wear and anti-scuffing properties, significantly extending the life of the scenery at all operating modes in a fairly wide range of ambient temperatures along with significant fuel savings;
– Phenol and amine antioxidants in combination with a synthetic base provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties and low ash content, effectively reduces scaling and varnish formation, prevents deposits of all kinds and maintains engine parts in perfectly clean condition throughout the entire interval between replacements;
– A unique formulation provides increased oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long like interval and conventional motors;
– Due to the synthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Compatible with all exhaust gas after-treatment systems: – DPF, TWC, EGR and SCR thanks to the use of Low SAPS technology;
– Effectively protects engine parts from all types of corrosion;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Suitable for engines using fuelled by natural gas (LNG) and petroleum (LPG) gas.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V where a performance level of CJ-4 or lower is required.
Can be used in gasoline engines where API SN or lower performance is required.
$111.00
Code : MN7108
Specifications : SAE 5W-30 / 5W30 / ACEA E4 / ACEA E7
Recommendation / OEM Approval : VOLVO VDS-3 / MAN M 3277 / MAN M 3377 / MACK EO-N / RENAULT RLD-2 / MB Approval 228.5 / API CI-4 / MTU Type 3 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / DETROIT DIESEL 93K215
Product Details
Energy-saving synthetic (PAO-based) motor oil for heavy duty and high-speed diesel engines of the latest generation with and without turbocharging, operating in difficult conditions. The oil has successfully passed road and laboratory tests at Daimler concern centres and has their written approvals.
Product properties:
– The unique low-viscosity synthetic PAO-containing base of the highest quality, with ideal viscosity in the required temperature range, combined with an innovative additive package, provides unrivaled anti-friction, anti-wear and anti-scuffing properties, which significantly extends the life of the equipment in all, even the most complicated, modes works in a fairly wide range of ambient temperatures and offers significant fuel savings;
– The synthetic PAO-containing base and the innovative additive package provide increased thermal oxidative stability and unsurpassed washing and dispersing properties to the oil (TBN > 12.5), effectively reducing the formation of scaling and varnish, preventing deposits of all kinds and maintaining perfect engine parts, especially the cylinder-piston group, throughout the entire service period between replacements;
– A unique PAO-containing formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 90,000 km and conventional motors;
– Due to the PAO-containing base, the lower viscosity has perfect low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -35ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– Can be used in combination with few all with higher sulphur content.
For all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from European, American and Asian manufacturers that meet the requirements of Euro I – V and VI requirements where the performance level of ACEA E4/E7 is mandatory.
$111.00
Code : MN7112
Specifications : SAE 10W-30 / 10W30 / API CI-4 Plus / API CI-4/CH-4/SL / ACEA E7 / ACEA A3/B4 / JASO DH-1 / GLOBAL DHD-1
Recommendation / OEM Approval : MB 228.1 / MB 228.3 / MACK EO-M Plus / MACK EO-N / MAN M 3275-1 / MTU Type 2 / CUMMINS CES 20076 / CUMMINS CES 20077 / CUMMINS CES 20078 / CATERPILLAR ECF-1a / CATERPILLAR ECF-2 / RENAULT RLD-2 / VOLVO VDS-3 / DETROIT DIESEL 93K215
Product Details
All-weather semi-synthetic (HC synthesis) motor oil for modern heavy duty and high-speed diesel engines with and without turbocharging, operated in difficult conditions. Designed specifically to protect machinery and benefit most out of it regardless of operating conditions.
Product properties:
– Innovative additives in combination with a semi-synthetic base of the highest quality and low viscosity provide excellent anti-friction, anti-wear and extreme pressure characteristics, which significantly extends the service life of the equipment in any, even the most extreme, operating conditions in a wide range of ambient temperatures, and provides significant fuel savings;
– The synthetic components in combination with natural antioxidants provide increased thermal oxidative stability to the oil, which, in combination with excellent detergent-dispersant properties (TBN> 10) and low ash content, effectively reduces the formation of scaling and varnish, prevents deposits of all kinds and maintains engine parts exceptionally clean throughout the service between replacements;
– A unique hydrosynthetic formulation provides oil resistance to aging, and due to the reduced evaporation and high flash point, it reduces oil scaling “waste”, which enables it to be used in engines with a long life interval up to 30,000 km and conventional motors;
– Due to the hydrosynthetic base, the optimal viscosity has excellent low-temperature properties, including a low pour point, along with good oil pumpability and crankability of engine components at low temperatures, easy “cold start” (up to -30 ºC) and reduced startup wear;
– Effectively protects engine parts from all types of corrosion and gaskets – against acid etching;
– Lower foam formation;
– Effectively deals with the increase in shear stress during operation caused by elevated viscosity due to soot dispersion;
– A special additive package is developed taking into account the difficult Russian operating conditions and low fuel quality.
Designed for all types of heavy duty diesel motors (long distance trucks, buses, etc.), off-road machinery (construction, mining, agricultural) and special equipment from Russian, European, American and Asian manufacturers that meet the requirements of Euro I, II, III, IV, V where a performance level of CI-4 or lower is required.
Can be used in gasoline engines where API SL or lower performance is required.
$111.00
Code : MN7902
Specifications : SAE 10W-60 / 10W60 / API SN/CH-4 / ACEA A3/B4
Recommendation / OEM Approval : VOLKSWAGEN 501 01 / VOLKSWAGEN 505 00 / MB 229.1 / FIAT 9.55535-H3 / PSA B71 2300
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines operating in harsh and extreme operating conditions. Designed to meet the requirements of manufacturers of sports and racing cars.
Product properties:
– The maximum range of viscous-temperature properties ensures full engine performance at very high thermal loads, extreme conditions of sporting events and during overloads;
– The ester oil components create an exceptionally resistant oil film, which provides the highest wear resistance and unsurpassed antifriction properties in extreme engine operating conditions, including in heat;
– Due to the presence of ester components, the oil acquires the highest thermo-oxidative stability which, in combination with excellent washing and dispersing properties, ensures exceptional cleanliness of engine parts throughout the entire period of oil use;
– Recommended for use in sports and racing cars;
– It can be used for vehicles with high mileage;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel;
– It is not advisable to use under normal operating conditions.
Designed for all types of gasoline (carbureted, injection and direct injection) and diesel engines (with and without turbocharging, with direct injection and without) racing, sports and specialized cars and other cars operating in high-accelerated modes, when the level of API performance properties is required SN / CH-4 and below, as well as ACEA A3 / B4.
The oil is not suitable for use in heavy trucks and similar vehicles!
$999.00
Code : MN7901
Specifications : SAE 0W-40 / 0W40 / ACEA A3/B4 / API SN/CH-4
Recommendation / OEM Approval : ACEA A3/B4 / BMW LL-04 / VOLKSWAGEN 502 00 / VOLKSWAGEN 505 00 / MB 229.5 / MB 229.3 / PORSCHE A40 / RENAULT RN17 / RENAULT RN0700 / RENAULT RN0710 / GM LL-A-025 / GM LL-B-025 / FIAT 9.55535-M2 / FORD WSS-M2C937-A / CHRYSLER MS-10725 / CHRYSLER MS-12633 / Additional_Recommended_Applications for AMG
Product Details
Universal bi-synthetic (PAO + esters) premium motor oil designed for new generations of all types of engines. Designed in accordance with the requirements of German automakers.
Product properties:
– A unique bi-synthetic (PAO + esters) base with an expanded range of viscous and temperature properties ensures effective engine operation in all operating modes: during cold start, in city mode, in highway mode, as well as at increased load (when driving on the road, uphill, with a trailer, maximum load) and at high ambient temperatures:
– Due to its excellent washing-dispersing properties and the highest thermal-oxidative stability, it effectively fights against all types of deposits and keeps engine parts and turbochargers clean throughout the entire interval between replacements;
– Low viscosity bi-synthetic base (PAO + esters) and a highly effective additive package provide reliable cold start in the most severe conditions, which significantly reduces engine starting wear;
– Due to the exceptional strength of the oil film created by the ester components, it has excellent anti-seize, anti-wear and anti-friction properties, which allows to save fuel and, combined with excellent pumpability, significantly increase engine life even in “start-stop” driving modes;
– It is used in engines with extended oil change intervals (Long Life up to 30,000 km) and conventional;
– Due to the high thermo-oxidative stability, it effectively resists aging;
– Has increased resistance to fuel of variable quality and effectively resists liquefaction by fuel.
Designed for gasoline and diesel engines (with and without turbocharging) a wide fleet of cars (cars, light SUVs, minibuses and light trucks of European and other manufacturers), where the performance level of API SN / CH-4 and lower, as well as ACEA A3/B4.
Recommended for use in engines of Daimler, BMW, VW cars, which impose additional requirements for engine oils (according to the above specifications).
The oil is not suitable for use in heavy trucks and similar vehicles!
